it's working! from the first boot the KuroBox gets a IPv6 address from the router.
LSPPC-Squeeze root ~ # ping6 ipv6.google.com
PING ipv6.google.com(iad04s01-in-x63.1e100.net) 56 data bytes
64 bytes from iad04s01-in-x63.1e100.net: icmp_seq=1 ttl=55 time=101 ms
64 bytes from iad04s01-in-x63.1e100.net: icmp_seq=2 ttl=55 time=92.9 ms
64 bytes from iad04s01-in-x63.1e100.net: icmp_seq=3 ttl=55 time=94.4 ms
64 bytes from iad04s01-in-x63.1e100.net: icmp_seq=4 ttl=55 time=93.3 ms
eth0 Link encap:Ethernet HWaddr 00:0d:0b:99:55:dd
inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: 2001:5c0:150f:8000:20d:bff:fe99:55dd/64 Scope:Global
inet6 addr: fe80::20d:bff:fe99:45db/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:411 errors:0 dropped:0 overruns:0 frame:0
TX packets:674 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:46404 (45.3 KiB) TX bytes:66207 (64.6 KiB)
Interrupt:16 Base address:0xcc00
How have you build ipv6 support? As module or have you recompiled the linux kernel, including ipv6?
Because I'm trying to build it as module, but (even if I added a couple of options), it complains about some missing symbols.
Searching on google, I found this link: http://forum.soft32.com/linux/20-git8-f ... 39760.html
It seems, at least 3 years ago, that you couldn't build ipv6 as module if you include SUNRPC in the kernel, which IS included in the kernel we got in the tarball....
I can confirm that is not possible to build ipv6 as module. Rebuilding the whole kernel is ok.
I found a little problem, but I'm not sure it is due to the debian image itself. If you add another user and login with it, the prompt is completely messed up. And, if you add the user as root, including the password, it results as "not authorized", you have to "passwd" as root again.