Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Wed Nov 22, 2017 8:36 am

All times are UTC+01:00




Post new topic  Reply to topic  [ 1 post ] 
Author Message
PostPosted: Wed Feb 08, 2017 6:29 am 
Offline
Newbie

Joined: Thu Jul 28, 2016 7:43 am
Posts: 16
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.6.7-ls421de (root@hpp.a.aa) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #4 SMP Tue Feb 7 22:49:50 GMT 2017
[ 0.000000] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine model: Buffalo LinkStation LS421DE
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat c10f5cc0, node_mem_map cfdb8000
[ 0.000000] Normal zone: 576 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65536 pages, LIFO batch:15
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] percpu: Embedded 14 pages/cpu @cfd9c000 s24640 r8192 d24512 u57344
[ 0.000000] pcpu-alloc: s24640 r8192 d24512 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64960
[ 0.000000] Kernel command line: earlyprintk console=ttyS0,115200 root=/dev/sda2 rw initrd=0x2600040 panic=5 BOOTVER=0.34 UBOOT_DATE=2014/08/22
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 242712K/262144K available (9455K kernel code, 1027K rwdata, 4244K rodata, 1024K init, 358K bss, 19432K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0e60f58 (14692 kB)
.init : 0xc0f00000 - 0xc1000000 (1024 kB)
.data : 0xc1000000 - 0xc1100dc4 (1028 kB)
.bss : 0xc1100dc4 - 0xc115a91c ( 359 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] L2C: DT/platform modifies aux control register: 0x12086302 -> 0x1a086302
[ 0.000000] Aurora cache controller enabled, 4 ways, 256 kB
[ 0.000000] Aurora: CACHE_ID 0x00000100, AUX_CTRL 0x1a086302
[ 0.000000] Switching to timer-based delay loop, resolution 60ns
[ 0.000009] sched_clock: 32 bits at 16MHz, resolution 60ns, wraps every 128849023969ns
[ 0.006687] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 114675631333 ns
[ 0.016711] Console: colour dummy device 80x30
[ 0.019935] Calibrating delay loop (skipped), value calculated using timer frequency.. 33.33 BogoMIPS (lpj=166666)
[ 0.029073] pid_max: default: 32768 minimum: 301
[ 0.032595] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.037982] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.044416] CPU: Testing write buffer coherency: ok
[ 0.048348] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.052320] Setting up static identity map for 0x100000 - 0x100058
[ 0.057644] mvebu-soc-id: MVEBU SoC ID=0x6710, Rev=0x1
[ 0.061704] mvebu-pmsu: Initializing Power Management Service Unit
[ 0.067771] Brought up 1 CPUs
[ 0.069519] SMP: Total of 1 processors activated (33.33 BogoMIPS).
[ 0.074459] CPU: All CPU(s) started in SVC mode.
[ 0.078478] devtmpfs: initialized
[ 0.084826] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6
[ 0.091587] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.100317] xor: measuring software checksum speed
[ 0.196418] arm4regs : 739.200 MB/sec
[ 0.296419] 8regs : 680.400 MB/sec
[ 0.396416] 32regs : 685.200 MB/sec
[ 0.399369] xor: using function: arm4regs (739.200 MB/sec)
[ 0.403712] pinctrl core: initialized pinctrl subsystem
[ 0.408655] NET: Registered protocol family 16
[ 0.412327] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.418614] cpuidle: using governor ladder
[ 0.427960] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.606738] raid6: int32x1 gen() 132 MB/s
[ 0.776562] raid6: int32x1 xor() 150 MB/s
[ 0.946707] raid6: int32x2 gen() 199 MB/s
[ 1.116591] raid6: int32x2 xor() 172 MB/s
[ 1.286499] raid6: int32x4 gen() 220 MB/s
[ 1.456534] raid6: int32x4 xor() 175 MB/s
[ 1.626542] raid6: int32x8 gen() 244 MB/s
[ 1.796429] raid6: int32x8 xor() 160 MB/s
[ 1.799467] raid6: using algorithm int32x8 gen() 244 MB/s
[ 1.803627] raid6: .... xor() 160 MB/s, rmw enabled
[ 1.807278] raid6: using intx1 recovery algorithm
[ 1.811303] vgaarb: loaded
[ 1.813078] SCSI subsystem initialized
[ 1.815795] libata version 3.00 loaded.
[ 1.816064] usbcore: registered new interface driver usbfs
[ 1.820425] usbcore: registered new interface driver hub
[ 1.824547] usbcore: registered new device driver usb
[ 1.828869] Advanced Linux Sound Architecture Driver Initialized.
[ 1.834416] Bluetooth: Core ver 2.21
[ 1.836842] NET: Registered protocol family 31
[ 1.840054] Bluetooth: HCI device and connection manager initialized
[ 1.845171] Bluetooth: HCI socket layer initialized
[ 1.848834] Bluetooth: L2CAP socket layer initialized
[ 1.852686] Bluetooth: SCO socket layer initialized
[ 1.857239] clocksource: Switched to clocksource armada_370_xp_clocksource
[ 1.903106] VFS: Disk quotas dquot_6.6.0
[ 1.905863] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.922036] NET: Registered protocol family 2
[ 1.925718] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 1.931510] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 1.936733] TCP: Hash tables configured (established 2048 bind 2048)
[ 1.941914] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 1.946520] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 1.951710] NET: Registered protocol family 1
[ 1.955166] RPC: Registered named UNIX socket transport module.
[ 1.959878] RPC: Registered udp transport module.
[ 1.963348] RPC: Registered tcp transport module.
[ 1.966817] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.972054] PCI: CLS 0 bytes, default 64
[ 1.972443] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 1.980340] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 1.986094] workingset: timestamp_bits=12 max_order=16 bucket_order=4
[ 1.991781] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.996463] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 2.002083] ntfs: driver 2.1.32 [Flags: R/W].
[ 2.005240] jffs2: version 2.2. (NAND) \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc.
[ 2.010490] fuse init (API version 7.24)
[ 2.013393] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 2.023901] async_tx: api initialized (async)
[ 2.027119] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 2.033345] io scheduler noop registered
[ 2.036042] io scheduler deadline registered
[ 2.039130] io scheduler cfq registered (default)
[ 2.043401] armada-370-pinctrl d0018000.pin-ctrl: registered pinctrl driver
[ 2.050125] irq: Cannot allocate irq_descs @ IRQ42, assuming pre-allocated
[ 2.056326] irq: Cannot allocate irq_descs @ IRQ74, assuming pre-allocated
[ 2.062445] irq: Cannot allocate irq_descs @ IRQ106, assuming pre-allocated
[ 2.068883] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
[ 2.074525] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
[ 2.079625] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffdfffff]
[ 2.085261] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.089580] pci 0000:00:01.0: [11ab:6710] type 01 class 0x060400
[ 2.089855] pci 0000:00:02.0: [11ab:6710] type 01 class 0x060400
[ 2.090087] PCI: bus0: Fast back to back transfers disabled
[ 2.094428] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.101253] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.108196] PCI: bus1: Fast back to back transfers enabled
[ 2.112454] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 2.112586] PCI: bus2: Fast back to back transfers enabled
[ 2.116840] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 2.116876] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 2.120644] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 2.124585] mv_xor d0060800.xor: Marvell shared XOR driver
[ 2.168259] mv_xor d0060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 2.175968] mv_xor d0060900.xor: Marvell shared XOR driver
[ 2.218270] mv_xor d0060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 2.288084] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.295140] console [ttyS0] disabled
[ 2.317672] d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 12500000) is a 16550A
[ 2.325400] console [ttyS0] enabled
[ 2.329892] bootconsole [earlycon0] disabled
[ 2.348804] brd: module loaded
[ 2.356890] loop: module loaded
[ 2.359355] sata_mv d00a0000.sata: version 1.28
[ 2.359596] sata_mv d00a0000.sata: slots 32 ports 2
[ 2.365044] scsi host0: sata_mv
[ 2.367452] scsi host1: sata_mv
[ 2.369549] ata1: SATA max UDMA/133 irq 29
[ 2.372360] ata2: SATA max UDMA/133 irq 29
[ 2.375757] pxa3xx-nand d00d0000.nand: This platform can't do DMA on this device
[ 2.382603] nand: No NAND device found
[ 2.385086] pxa3xx-nand d00d0000.nand: failed to scan nand at cs 0
[ 2.391093] m25p80 spi0.0: mx25l8005 (1024 Kbytes)
[ 2.394623] 2 ofpart partitions found on MTD device spi0.0
[ 2.398881] Creating 2 MTD partitions on "spi0.0":
[ 2.402399] 0x000000000000-0x0000000f0000 : "u-boot"
[ 2.406514] 0x0000000f0000-0x000000100000 : "u-boot-env"
[ 2.411804] libphy: Fixed MDIO Bus: probed
[ 2.414856] libphy: orion_mdio_bus: probed
[ 2.420210] mvneta d0074000.ethernet eth0: Using device tree mac address cc:e1:d5:a6:a7:8b
[ 2.427378] PPP generic driver version 2.4.2
[ 2.430596] NET: Registered protocol family 24
[ 2.433871] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.439170] ehci-pci: EHCI PCI platform driver
[ 2.442400] ehci-orion: EHCI orion driver
[ 2.445276] orion-ehci d0050000.usb: EHCI Host Controller
[ 2.449452] orion-ehci d0050000.usb: new USB bus registered, assigned bus number 1
[ 2.455876] orion-ehci d0050000.usb: irq 26, io mem 0xd0050000
[ 2.477263] orion-ehci d0050000.usb: USB 2.0 started, EHCI 1.00
[ 2.482117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.487667] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.493615] usb usb1: Product: EHCI Host Controller
[ 2.497208] usb usb1: Manufacturer: Linux 4.6.7-ls421de ehci_hcd
[ 2.501952] usb usb1: SerialNumber: d0050000.usb
[ 2.505998] hub 1-0:1.0: USB hub found
[ 2.508548] hub 1-0:1.0: 1 port detected
[ 2.511689] orion-ehci d0051000.usb: EHCI Host Controller
[ 2.515830] orion-ehci d0051000.usb: new USB bus registered, assigned bus number 2
[ 2.522286] orion-ehci d0051000.usb: irq 27, io mem 0xd0051000
[ 2.537250] orion-ehci d0051000.usb: USB 2.0 started, EHCI 1.00
[ 2.542079] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.547618] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.553567] usb usb2: Product: EHCI Host Controller
[ 2.557160] usb usb2: Manufacturer: Linux 4.6.7-ls421de ehci_hcd
[ 2.561903] usb usb2: SerialNumber: d0051000.usb
[ 2.565920] hub 2-0:1.0: USB hub found
[ 2.568479] hub 2-0:1.0: 1 port detected
[ 2.571770] usbcore: registered new interface driver cdc_acm
[ 2.576149] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.583016] usbcore: registered new interface driver usblp
[ 2.587297] usbcore: registered new interface driver cdc_wdm
[ 2.591797] usbcore: registered new interface driver usb-storage
[ 2.596639] usbcore: registered new interface driver usbserial
[ 2.601276] usbcore: registered new interface driver usbserial_generic
[ 2.606564] usbserial: USB Serial support registered for generic
[ 2.611364] usbcore: registered new interface driver pl2303
[ 2.615689] usbserial: USB Serial support registered for pl2303
[ 2.620909] mousedev: PS/2 mouse device common for all mice
[ 2.625808] i2c /dev entries driver
[ 2.947257] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 2.954703] ata1.00: ATA-9: WDC WD30EZRX-22D8PB0, 80.00A80, max UDMA/133
[ 2.960158] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.968211] ata1.00: configured for UDMA/133
[ 2.971796] scsi 0:0:0:0: Direct-Access ATA WDC WD30EZRX-22D 0A80 PQ: 0 ANSI: 5
[ 2.979728] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 2.986206] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.990274] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.994866] sd 0:0:0:0: [sda] Write Protect is off
[ 2.998432] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.998586] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.074126] sda: sda1 sda2 sda3 sda4 sda5
[ 3.078956] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.318617] ata2: SATA link down (SStatus 0 SControl F300)
[ 4.627241] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[ 4.632497] rtc-rs5c372 0-0032: can't read registers
[ 4.636194] rtc-rs5c372: probe of 0-0032 failed with error -5
[ 4.641780] gpio-fan gpio-fan: GPIO fan initialized
[ 4.655994] md: linear personality registered for level -1
[ 4.660230] md: raid0 personality registered for level 0
[ 4.664263] md: raid1 personality registered for level 1
[ 4.668311] md: raid10 personality registered for level 10
[ 4.672789] md: raid6 personality registered for level 6
[ 4.676819] md: raid5 personality registered for level 5
[ 4.680872] md: raid4 personality registered for level 4
[ 4.685204] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 4.735543] marvell-cesa d0090000.crypto: CESA device successfully registered
[ 4.741880] usbcore: registered new interface driver usbhid
[ 4.746178] usbhid: USB HID core driver
[ 4.759700] oprofile: using arm/armv7-ca9
[ 4.762841] NET: Registered protocol family 10
[ 4.767349] NET: Registered protocol family 17
[ 4.770613] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 4.782173] l2tp_core: L2TP core driver, V2.0
[ 4.785255] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 4.789633] l2tp_netlink: L2TP netlink interface
[ 4.793044] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 4.797742] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 4.802928] 8021q: 802.1Q VLAN Support v1.8
[ 4.806080] ThumbEE CPU extension supported.
[ 4.809134] Registering SWP/SWPB emulation handler
[ 4.817105] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 4.823147] hctosys: unable to open rtc device (rtc0)
[ 4.828154] ALSA device list:
[ 4.829836] No soundcards found.
[ 4.832637] md: Waiting for all devices to be available before autodetect
[ 4.838234] md: If you don't use raid, use raid=noautodetect
[ 4.843785] md: Autodetecting RAID arrays.
[ 4.846605] md: Scanned 0 and added 0 devices.
[ 4.849850] md: autorun ...
[ 4.851352] md: ... autorun DONE.
[ 4.876673] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
[ 4.965295] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.971785] VFS: Mounted root (ext3 filesystem) on device 8:2.
[ 5.001984] devtmpfs: mounted
[ 5.005935] Freeing unused kernel memory: 1024K (c0f00000 - c1000000)
[ 8.521668] random: lvm urandom read with 113 bits of entropy available
[ 9.358342] random: nonblocking pool is initialized
[ 30.682015] Adding 9530364k swap on /dev/sda3. Priority:-1 extents:1 across:9530364k
[ 31.084927] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 31.127970] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 1 post ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited