Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Thu Aug 16, 2018 4:26 pm

All times are UTC+01:00




Post new topic  Reply to topic  [ 6 posts ] 
Author Message
 Post subject: LS441D
PostPosted: Sun Dec 17, 2017 2:04 pm 
Offline
Total Newbie

Joined: Sun Dec 17, 2017 12:14 am
Posts: 2
Hi
Last week I got my first Buffalo NAS LS441D ( have a few D-Link (no longer made) and a OMV box ).
While testing every thing went fine with the 1.83 firmware (not fond of the NAS Navigator but can live with it ).
Then the penny dropped - it does not turn the hard drives off when not in use ( hibernation ) I am lucky if it will be used 2 hours a week ( never the same two :? ).
It has a timed sleep but I need to turn it on with button if needed while sleeping ( I may as well just turn it off ).
I searched for a custom firmware have not found much.
I have found "acp_commander-156-win" and can ls.
I also found instruction to install U-Boot ( out of my comfort zone now, but I can follow instruction like a sheep ) from "sites.google.com/site/shihsung/88fxxxx-soc/ls441de"
Has any body tried this ?
I am assuming once debian wheezy is install ( if it can be and not much support left in it) I could then install OMV.
If so is lack of WOL / Hibernation a hardware or software restriction.

Eliot


Top
   
 Post subject: Re: LS441D
PostPosted: Mon Jan 01, 2018 8:46 pm 
Offline
Total Newbie

Joined: Sun Dec 17, 2017 12:14 am
Posts: 2
Update

With ACP Commander I have gained SSH access

using the "chmod 0755 /etc/init.d/sshd.sh" method

Tried to install U-Boot as this post https://sites.google.com/site/shihsung/ ... oc/ls441de
But it fails to find uImage.buffalo.orig ( I assume due to 1.83 firmware )

Untill I can turn the drives off I don't want to use the NAS ( as a everyday NAS ) bay be ok for backups

EliotN


Top
   
 Post subject: Re: LS441D
PostPosted: Sun Jun 03, 2018 5:07 pm 
Offline
Total Newbie

Joined: Sun Jun 03, 2018 1:32 pm
Posts: 2
hi
could you explain how you made it to get ssh access? im not able to activate ssh with acp_commander
the tool can find the LS441 and shows "OK" during and after ssh and passwort process

but neither with telnet, nor with ssh im able to connect with putty. "Connection refused"

Any hints?


Top
   
 Post subject: Re: LS441D
PostPosted: Mon Jun 04, 2018 5:46 am 
Online
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2734
Quote:
using the "chmod 0755 /etc/init.d/sshd.sh" method


Code:
chmod 0755 /etc/init.d/sshd.sh

(echo newrootpass;echo newrootpass)|passwd

sed -i 's/#Port 22/Port 22/g' /etc/sshd_config

sed -i 's/#Protocol 2/Protocol 2/g' /etc/sshd_config

sed -i 's/#PermitRootLogin yes/PermitRootLogin yes/g' /etc/sshd_config

sed -i 's/#StrictModes yes/StrictModes yes/g' /etc/sshd_config

sed -i 's/\/usr\/lib\/sftp-server/\/usr\/local\/libexec\/sftp-server/g' /etc/sshd_config

sed -i 's/"${SUPPORT_SFTP}" = "0"/"${SUPPORT_SFTP}" = "1"/g' /etc/init.d/sshd.sh

/etc/init.d/sshd.sh restart


from
http://forum.nas-hilfe.de/buffalo-techn ... t2165.html


Top
   
 Post subject: Re: LS441D
PostPosted: Wed Jun 06, 2018 5:00 pm 
Offline
Total Newbie

Joined: Sun Jun 03, 2018 1:32 pm
Posts: 2
danke oxy

allerdings komme ich auch nach eingabe aller befehle, die alle mit "OK" beantwortet werden, nicht ├╝ber SSH auf die Box. "Connection refused" :-/


Top
   
 Post subject: Re: LS441D
PostPosted: Wed Jun 06, 2018 5:45 pm 
Online
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2734
hast du die Firewall aus?


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited