Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Wed Nov 22, 2017 8:39 am

All times are UTC+01:00




Post new topic  Reply to topic  [ 1 post ] 
Author Message
 Post subject: LS400 series ROOT/SSH
PostPosted: Mon Jul 10, 2017 6:41 pm 
Offline
Newbie
User avatar

Joined: Tue Nov 01, 2016 1:17 pm
Posts: 42
1. run ACP Commander v1.5.6.0 (requires installed Java)

Image

2. in field "Admin password" type password admin account Buffalo (defaullt manufaturer - password)
3. press key "Set root PW", type YOUR password for root account.
4. in field "Command" type next commands, by entering them with button "Go!":
Code:
sed -i 's/#Port 22/Port 22/g' /etc/sshd_config
sed -i 's/#Protocol 2/Protocol 2/g' /etc/sshd_config
sed -i 's/#PermitRootLogin yes/PermitRootLogin yes/g' /etc/sshd_config
sed -i 's/#StrictModes yes/StrictModes yes/g' /etc/sshd_config
sed -i 's/\/usr\/lib\/sftp-server/\/usr\/local\/libexec\/sftp-server/g' /etc/sshd_config
sed -i 's/"${SUPPORT_SFTP}" = "0"/"${SUPPORT_SFTP}" = "1"/g' /etc/init.d/sshd.sh

5. reboot NAS
6. run PuTTY
Image
7. type IP NAS, select SSH/22, press "Open"
8. login -root, password is not displayed when type
Image
*. use WinSCP, file protocol: SCP, port: 22
Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 1 post ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
cron
Powered by phpBB® Forum Software © phpBB Limited