I have problems with activating ssh...
system LS421DE (LS421DEF6E) Version 1.34-0.95
download acp_commander.jar version 1.56-2
admin password is "admin", I can authenticate with it using WEB...
but any call jar file looks like this
$ java -jar acp_commander.jar -t 192.168.100.119 -ip 192.168.100.119 -pw admin -c "chmod 0755 /etc/init.d/sshd.sh"
ACP_commander out of the nas-central.org (linkstationwiki.net) project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.
WARNING: This is experimental software that might brick your linkstation!
Using random connID value = 9A2AE226D214
Using target: ls421def6e.local/192.168.100.119
Starting authentication procedure...
Sending Discover packet...
Found: LS421DEF6E (/192.168.100.119) LS421DE(LS-WM) (ID=004512) mac: 10:6F:3F:CA:1A:3F Firmware= 1.340 Key=40A7CABB
Trying to authenticate EnOneCmd... ACP_STATE_OK
Trying to authenticate with admin password... ACP_STATE_OK
>chmod 0755 /etc/init.d/sshd.sh
Changing IP: [b]ACP_STATE_PASSWORD_ERROR[/b]
Please note, that the current support for the change of the IP is currently very rudimentary.
The IP has been set to the given, fixed IP, however DNS and gateway have not been set. Use the WebGUI to make appropriate settings.
so, can't make it works...