Buffalo NAS-Central Forums

It looks fine.
There is no full cpu usage.



If you have 10MB/s with 100MBit LAN, your nas is ok.

The problem is the cable or the switch chipset in combination with the nas


Your NAS can transfer a maximum of 24/12MB/s reading/writing
100MBit is enough

yes when using 10/100Mbit cable no problem that is the strange part. just now i test copy and paste inside the nas. and it was slow too. i still not sure is the problem on the transfer side or copying side

so the gigabit network not very usefull on my NAS ?

thx

Only Gigabit can tranfer 24MB/s
Change the camble.


be aware when you change debug options
to flash a FW1.69 over a 1.69 you have to set
Do not check versio
and
force update

already success installed chris firmware. it seem there is a service running before. after stop the service installation work now. thx.

after flashing chris firmware my problem still exist.. i think will buy a new cable to test.

thank you oxygen for all your help. you are a savior to me

oh yes.. if i install chris firmware my old ssh are gone ? i see in chris firmware there is a ssh that is open at port 2222 but i can not connect there. i try telnet or connect using putty all connection refused.

i read chris FAQ it say need to reset the nas. is the reset mean here is restart the nas or restore the nas or something else ?

use putty an set 22 to 2222

try that already.... still connection refused

i re-enable with acp_commander_gui_156 and it turn out working on port 22. now my question will it be conflict to chris firmware ssh on port 2222 ?

Any hints on getting NFS to work with the Raspberry Pi?
Im running the newest release of OSMC on it.
When i make it search for NFS it doesnt find anything, if i search SMB it comes up right away.

root@Skyen:/# cat /etc/exports
/mnt/array1/share
192.168.88.0/255.255.255.0(rw,no_root_squash,insecure)

Ive testet the NFS is running with this NFS Client for Windows

Hi,

I have installed 1.69-3.59 Chris onto my LS-WVL/R1 and whenever I try to check for firmware update, I'm receiving this error. Also on Plex, after installing channel video etc. Youtube or CNN, and play it on my Samsung TV, I'm getting error "Check your network" It does seem like Plex or the firmware update can't access the internet. I have check my internet access by using webaccess via buffalonas.com and it work flawlessly. Is there anything I'm missing?

Hi hostet,

That's because DropBox (the host for the auto-updates) changed their certificate provider and the Linkstation doesn't trust the new one. You can read more about it in the announcements of the new version here: http://www.tomatosoft.hu/gadgets/buffaloplex-firmware-1-71-3-65-andimaginary-released/.

As for the SSH issue frankchen10 has experienced, here's a little background:
Port 22 (the original SSH port) is used by Buffalo to provide the SFTP service. The "Chris" or the new "Andimaginary" firmware doesn't touch that so the SFTP feature is intact. The new 2222 port for root SSH access needs to be turned on in the Network Settings -> Settings -> Services menu option as it is disabled by default for security reasons. (Regular users don't need it.)

- GaryT

Hello,

I'm a newbie here. i'm using 1.71-Andimaginary firmware on my LS-WVL. and i want to use sub path on utorrent web ui. does it possible? i try but not success. thanks.

I just had a quick test of 1.71 with my QVL

The stock auto standby setup is broken

It kept going to sleep every few mins then waking back up again when the naspmservice on the pc
sent the packet

Greetings! Is there any chance to install and run Plex on the Buffalo Terastation 5400R?

Hi,

First of all, thank you for this great firmware, opened up many possibilities!

I'm using the latest version, 1.71-Halloween. As you know, it uses version 0.9.12.13 of the Plex server. However, I just bought a 4th gen. AppleTV and have installed the Plex App. Unfortunately it complains that I'm using a version of the PMS that is too old. I guess that PlexMediaServer-0.9.12.18.1520-6833552-arm.spk is needed.

Do you know if the firmware will be updated with this version anytime soon? Or, is it possible to update the PMS version by myself?

there are howto to install plex.
you can use it to update.

i will search for that later