Buffalo NAS-Central Forums
http://forum.buffalo.nas-central.org/

Installed bigger hard drives in ls-wx2.0tl now it won't work
http://forum.buffalo.nas-central.org/viewtopic.php?f=75&t=27279
Page 1 of 1

Author:  gjd7721 [ Mon Jul 08, 2013 1:13 am ]
Post subject:  Installed bigger hard drives in ls-wx2.0tl now it won't work

Hi could anyone tell me what i need to do after installing 2 new bigger hard drives in my ls-wx2.0tl.
Gary

Author:  oxygen8 [ Mon Jul 08, 2013 2:04 am ]
Post subject:  Re: Installed bigger hard drives in ls-wx2.0tl now it won't

TFTP
LSUpdater

Author:  gjd7721 [ Mon Jul 08, 2013 2:09 am ]
Post subject:  Re: Installed bigger hard drives in ls-wx2.0tl now it won't

I'm assuming these are programs.
Do you have links to where I can find them? (Not to mention how to use them)
Gary

Author:  oxygen8 [ Mon Jul 08, 2013 3:59 am ]
Post subject:  Re: Installed bigger hard drives in ls-wx2.0tl now it won't

http://www.herzig-net.de/prog/?page=unbrick_ls-wxl

Delete all Partitions !
use NoFormatting = 0

http://forum.nas-hilfe.de/buffalo-technology-nas-anleitungen/anleitung-tftp-und-firmware-flashen-mit-bildern-t903.html

Author:  gjd7721 [ Tue Jul 09, 2013 4:46 am ]
Post subject:  Re: Installed bigger hard drives in ls-wx2.0tl now it won't

oxygen8 wrote:


I did all of this but after the NAS reboots I get the red light flashing 6 times.
Any other suggestions or are the some idiot proof instructions that I can follow?

Author:  oxygen8 [ Tue Jul 09, 2013 9:06 am ]
Post subject:  Re: Installed bigger hard drives in ls-wx2.0tl now it won't

Quote:
Anmerkung:

Das ist so irre, dass ich dazu noch Etwas schreiben möchte.
Eine lauffähige LS-WVL habe ich mit größeren Platten bestückt. Dier Linkstation legt ein Raid0 an. Ich wollte das ändern. Nach dem Neustart fuhr die Maschine immer mit E06 an. Ich habe TFTP 1.64 mit FW 1.64Mod1a und TFTP 1.53 mit FW 1.54Mod1 versucht. Ohne Erfolg. FW 1.60 original brachte die Maschine wieder zum Laufen. Danach habe ich Shonks 1.64Mod1a aufgespielt und alles lief.


from
http://forum.nas-hilfe.de/buffalo-technology-nas-anleitungen/anleitung-tftp-und-firmware-flashen-mit-bildern-t903.html

try original FW 1.60 and later flash Shonks Mod

Author:  NASnovice [ Thu Jul 11, 2013 8:33 pm ]
Post subject:  Re: Installed bigger hard drives in ls-wx2.0tl now it won't

Hi first post so be gentle please. :)

Similar problem except the LS-WXL firmware v1.6 (I think) installed new 2TB HDD to replace the failed 1TB and all I get is flashing blue status light and orange flashing light indicating (1 long, 2 short) working in degraded mode and I can't find it using the NAS utility. Any advice please?

Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/