Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Fri Nov 17, 2017 8:28 pm

All times are UTC+01:00




Post new topic  Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Sun Dec 11, 2011 3:21 pm 
Offline
Total Newbie

Joined: Sun Dec 11, 2011 12:53 pm
Posts: 1
Hello.

I before worked with some debian servers (not so much). Always found solution too. But now when my sister needed small home server i have problems on installing with no solution.

I upgraded this LS-WSX1.0TL/R1 piece to latest firmware (1.54). Put disks to RAID1 (just preferred solution for me). Got ssh root access with acp_commander.

---------------------------------------------------

Lenny.

Root made and there starts problems with install with Lenny. I used [url="http://buffalo.nas-central.org/wiki/Debian_Lenny_on_LS-WXL"]Debian Lenny on LS-WXL[/url] wiki, because this must be compatible with my hardware as talked over this forum before.
Yes, wget works and i downloaded debootstrap_1.0.10lenny1_all.deb.
Next step must be dpkg and there i get this:
Quote:
Selecting previously deselected package debootstrap.
(Reading database ... 39969 files and directories currently installed.)
Unpacking debootstrap (from debootstrap_1.0.10lenny1_all.deb) ...
dpkg: dependency problems prevent configuration of debootstrap:
debootstrap depends on binutils; however:
Package binutils is not installed.
dpkg: error processing debootstrap (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
debootstrap

There is end with Lenny install.

---------------------------------------------------

Squeeze

Again clean stock firmware install and got root with acp_commander.

Quote:
wget http://ftp.us.debian.org/debian/pool/ma ... 32_all.deb
dpkg -i debootstrap_1.0.32_all.deb
Passed - with changing 1.0.32 to 1.0.38
Quote:
mkdir debian-squeeze
debootstrap --verbose --arch armel squeeze debian-squeeze http://ftp.us.debian.org/debian
Passed - with some warning inside install
Quote:
I: Retrieving Release
W: Cannot check Release signature; keyring file not available /usr/share/keyrings/debian-archive-keyring.gpg

but finally got: I: Base system installed successfully

Quote:
cp /boot/initrd.buffalo debian-squeeze/tmp
Passed
Quote:
LANG=C chroot debian-squeeze /bin/bash
Passed
Quote:
apt-get update
Passed
Quote:
cd /tmp
Passed
Quote:
dd if=initrd.buffalo of=initrd.gz ibs=64 skip=1
Passed - with information
Quote:
151913+1 records in
18989+1 records out
9722442 bytes (9.7 MB) copied, 1.31827 s, 7.4 MB/s

Quote:
gunzip initrd.gz
Passed
Quote:
mkdir INITRD
Passed
Quote:
mount -t ext2 -o loop initrd INITRD
Error - warning: can't open /etc/mtab: No such file or directory
Mount get this information:
Quote:
/dev/loop0 on /tmp/INITRD type ext2 (rw)



On this point i end again with installation. Yes i managed to go ahead too, but later had anyway problems with
Quote:
tar --numeric-owner -p -czf ../hddrootfs.buffalo.updated *


EDIT:
Quote:
cp -R INITRD/lib/modules/2.6.[3-9]?* /lib/modules/
Passed
Quote:
umount INITRD
Passed
Quote:
rmdir INITRD
Passed
Quote:
rm initrd*
Passed
Quote:
apt-get install locales
dpkg-reconfigure locales
Passed - installed two and deafult en_US.UTF-8, i go change it when debian installed
Quote:
mount -t proc proc /proc
Passed
Quote:
apt-get install --no-install-recommends mdadm
Passed
Quote:
umount /proc
Error - umount: /proc: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1))
Here is for me unclear where i must do this: Editing /etc/fstab (with vi or nano). On current system install /etc/fstab or on /root/debian-squeeze/etc/fstab where this debootstrap unpacked?

------------------------------------------------

Which is better Lenny or Squeeze and how then go over these problems?


Top
   
PostPosted: Sat May 20, 2017 3:03 pm 
Offline
Newbie

Joined: Thu May 18, 2017 8:10 am
Posts: 22
Quote:
Error - umount: /proc: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1))


i have unmount -f /proc


Top
   
PostPosted: Sat May 20, 2017 3:06 pm 
Offline
Newbie

Joined: Thu May 18, 2017 8:10 am
Posts: 22
Code:
 ps auxf | grep mdadm


Code:
kill -9 7315; kill -9 27147; umount /proc


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 3 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited