You have FW 1.65
Your box is kirkwood, not orion
You mean I already have LS-CHL V2?
Unfortunately it didn't work although I input the right variables (AdminPassword, newrootpass and NAS_IP) as mentioned in the original post
mbnoimi@mbnoimi-pc:~/Work/Buffalo NAS > java -jar acp_commander.jar -t 18.104.22.168 -ip 22.214.171.124 -pw myadminpass -c "(echo rootpass;echo rootpass)|passwd"
ACP_commander out of the nas-central.org (linkstationwiki.net) project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.
WARNING: This is experimental software that might brick your linkstation!
Using random connID value = A2D8E1BBAC21
Using target: 126.96.36.199/188.8.131.52
Starting authentication procedure...
Sending Discover packet...
A SocketTimeoutException usually indicates bad firewall settings.
Check especially for *UDP* port 22936 and make sure that the connection to your LS is working.
ERROR: Exception: SocketTimeoutException (Receive timed out) [ACP Send/Receive (Packet:8020 = ACP_Discover)]
mbnoimi@mbnoimi-pc:~/Work/Buffalo NAS >
P.S. I'm using Ubuntu and my firewall is tuned off.