Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Mon Dec 18, 2017 2:16 am

All times are UTC+01:00




Post new topic  Reply to topic  [ 13 posts ] 
Author Message
PostPosted: Sun Jul 09, 2017 8:25 pm 
Offline
Newbie

Joined: Mon Jan 09, 2012 12:02 pm
Posts: 39
The nas died. I can not update the firmware. The hard disk is clean. I use dhtsp. Ping good.
But every time I try: format failed. update aborted.
Can I not restore it?


Top
   
PostPosted: Sun Jul 09, 2017 8:41 pm 
Offline
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2693
have you set
Quote:
NoFormatting = 0



have you used all debug options
Image


read my howto
http://forum.nas-hilfe.de/buffalo-technology-nas-anleitungen/anleitung-tftp-und-firmware-flashen-mit-bildern-t903.html#p7225


Top
   
PostPosted: Sun Jul 09, 2017 9:01 pm 
Offline
Newbie

Joined: Mon Jan 09, 2012 12:02 pm
Posts: 39
I already tried it


Top
   
PostPosted: Sun Jul 09, 2017 9:25 pm 
Offline
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2693
post your smart output

windows
Image

or linux

Quote:
smartctl version 5.37 [arm-none-linux-gnueabi] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model: ST8000AS0002-1NA17Z
Serial Number: Z8404MHW
Firmware Version: AR13
User Capacity: 8,001,563,222,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 9
ATA Standard is: Not recognized. Minor revision code: 0x1f
Local Time is: Sat Jul 8 22:38:53 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 111 098 006 Pre-fail Always - 33312880
3 Spin_Up_Time 0x0003 095 090 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 245
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 53232909651
9 Power_On_Hours 0x0032 080 080 000 Old_age Always - 18304
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 245
183 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0
187 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
188 Unknown_Attribute 0x0032 100 099 000 Old_age Always - 4295032833
189 Unknown_Attribute 0x003a 100 100 000 Old_age Always - 0
190 Temperature_Celsius 0x0022 057 051 045 Old_age Always - 757399595
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 916
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 943
194 Temperature_Celsius 0x0022 043 049 000 Old_age Always - 43 (Lifetime Min/Max 0/16)
195 Hardware_ECC_Recovered 0x001a 111 099 000 Old_age Always - 33312880
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 277927333742406
241 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 106327885589
242 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 476149457013

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 18068 -
# 2 Extended offline Interrupted (host reset) 00% 18012 -
# 3 Extended offline Completed without error 00% 14548 -
# 4 Extended offline Completed without error 00% 11616 -
# 5 Extended offline Interrupted (host reset) 00% 11563 -
# 6 Extended offline Completed without error 00% 8356 -
# 7 Extended offline Interrupted (host reset) 00% 6897 -
# 8 Extended offline Interrupted (host reset) 00% 6871 -
# 9 Extended offline Interrupted (host reset) 00% 6851 -
#10 Extended offline Interrupted (host reset) 00% 6837 -
#11 Extended offline Completed without error 00% 5190 -
#12 Extended offline Completed without error 00% 5137 -
#13 Extended offline Interrupted (host reset) 00% 4919 -
#14 Extended offline Completed without error 00% 4805 -
#15 Extended offline Completed without error 00% 4589 -
#16 Extended offline Completed without error 00% 4148 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Top
   
PostPosted: Mon Jul 10, 2017 6:34 pm 
Offline
Newbie

Joined: Mon Jan 09, 2012 12:02 pm
Posts: 39
Image


Top
   
PostPosted: Mon Jul 10, 2017 6:42 pm 
Offline
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2693
have you sed MBR or GPT?
Use GPT

Image


Top
   
PostPosted: Tue Jul 11, 2017 1:54 pm 
Offline
Newbie

Joined: Mon Jan 09, 2012 12:02 pm
Posts: 39
Convert the disk to GPT. Anyway an error


Top
   
PostPosted: Tue Jul 11, 2017 5:59 pm 
Offline
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2693
try this firmware
http://download.discountnetz.com/oxygenacht/ls_series-160-mod1.zip

after success you can flash any other.


Top
   
PostPosted: Tue Jul 11, 2017 7:00 pm 
Offline
Newbie

Joined: Mon Jan 09, 2012 12:02 pm
Posts: 39
404 - Seite nicht gefunden!


Top
   
PostPosted: Tue Jul 11, 2017 8:07 pm 
Offline
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2693
http://www.mediafire.com/?5pgt7f8q38iwd


Top
   
PostPosted: Wed Jul 12, 2017 6:09 pm 
Offline
Newbie

Joined: Mon Jan 09, 2012 12:02 pm
Posts: 39
partition not found. aborting firmware update.


Top
   
PostPosted: Thu Jul 13, 2017 10:35 am 
Offline
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2693
maybe its not a problem of the linkstation.

you can try a winxp bootcd

http://forum.nas-hilfe.de/buffalo-technology-nas-anleitungen/rotes-blinken-e06-und-kein-windows-xp-mehr-in-reichweite-t1873.html


Top
   
PostPosted: Fri Jul 14, 2017 9:11 am 
Offline
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2693
Image

if you have this message, you have a partition on your drive

delete all partitions with windows

drive 2 is empty
Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 13 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited