Your nas can use 4096 bytes per sector.
How? Can I LLF it with 4K-Sectors (physical) in any way? ...and then use 8K-Sectors in XFS?
the 1TB-HDD gave me ~60MB/s.
This is not possible.
Which tool do you use?
Are you sure? It ran about 400MBit/s (50MB/s, to be more exact around 56MB/s) continuous before... I did however made some optimizations before (deactivating DLNA, etc.) and some stuff I've read here and elsewhere.
However... Even thou... It should atleast have higher rates than now... It sometimes crawls at 3-4MB/s...
THX, will try it!
XFS creates the structure on the fly.
Maybe this is running.
I am not sure, what you mean by that.
What should I test again? Speed of the NAS, with the app you've mentioned?
A wrong formatted disk can be very slow.
Yepp, I've read that. That's why I mentioned the stuff I thought would be noteworthy.
Du you start with a partitionfree disk?
Well, I LLF'd the HDD on my PC with 'Low Level Format Tool 4.40' and then put the blank HDD into the Nas.
6 times red-LED-blinking, started TFTP and the Updater (Shonk 1.69 Mod1) and then installed the firmware... The thing works, but it is fresh and has jumps between 3MB/s and 18MB/s...
The HDD I am reading from and the PC in general is fast enough.
The HDD I am copying from neither has the files compressed (but tried that too), nor fragmented.
Do not use a clone from your old disk!
I haven't done that.