Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Sat Dec 16, 2017 6:13 am

All times are UTC+01:00




Post new topic  Reply to topic  [ 10 posts ] 
Author Message
 Post subject: help to restore my NAS
PostPosted: Sun Apr 23, 2017 9:37 am 
Offline
Newbie

Joined: Sun Mar 08, 2015 12:58 pm
Posts: 24
Hello,


i have problem with my buffalo NAS LS-CHL V2. The Nas wont turn on, there is no light indicator at all. the only led show is the power (green) and the LAN (blinking green).

this is some step i already done :

- already take apart the NAS and remove the HDD and backup all my data

- already try to boot fron TFTP boot, there is no response.
Code:
Preparing to write TFTP configuration settings.
TFTP Configuration settings have been written.
TFTP Server Multithreaded Version 1.4 Windows Built 1.400


Starting TFTP...
alias / is mapped to C:\TFTP_Boot_Recovery_1.24_All_4_Models_2\TFTP Boot Recovery 1.24 All 4 Models\
listening On: 192.168.111.164:69
listening On: 192.168.11.1:69
listening On: 127.0.0.1:69
listening On: 172.19.80.1:69
permitted clients: all
server port range: all
max blksize: 65464
defult blksize: 512
default interval: 3
overwrite existing files: No
thread pool size: 1

accepting requests..



- already try to get in to EM mode but it seem i can not get into EM Mode :(

so the question now is my NAS is still recoverable ? is there something i can still try to save my NAS ?

Thanks


Top
   
PostPosted: Sun Apr 23, 2017 3:51 pm 
Offline
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2692
Quote:
led show is the power (green)


then you have not a LS-CHL V2 and you are using wring tftp-files


look at the pictures from
http://buffalo.nas-central.org/wiki/Main_Page

which nas do you have?


Top
   
PostPosted: Sun Apr 23, 2017 6:20 pm 
Offline
Newbie

Joined: Sun Mar 08, 2015 12:58 pm
Posts: 24
Hi oxygen8, i'm sorry i make a mistake. the led indicator at front is blue. what i mean green led is the one near the power plug. my mistake :P. the led indicator at front not showing any light at all for now :(

here is a pic of my NAS CPU, i think this is "LS-CHL V2" because the cpu model is 88F6281
Image


Top
   
PostPosted: Sun Apr 23, 2017 6:29 pm 
Offline
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2692
Then save your data and buy a new NAS

point 12) from my german howto

http://forum.nas-hilfe.de/buffalo-technology-nas-anleitungen/blaues-blinken-datenrettung-von-einer-durch-stromausfall-nicht-mehr-ansprechbaren-ls-chlv2-t1849.html


Top
   
PostPosted: Mon Apr 24, 2017 6:22 am 
Offline
Newbie

Joined: Sun Mar 08, 2015 12:58 pm
Posts: 24
ow... so there is no hope to restore my NAS :(.

thank you oxygen8 for your advice


Top
   
PostPosted: Mon Apr 24, 2017 6:51 am 
Offline
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2692
your hardware is demaged

the status led must be blue, red or yellow

maybe its only the ON/OFF switch


Top
   
PostPosted: Mon Apr 24, 2017 4:21 pm 
Offline
Newbie

Joined: Sun Mar 08, 2015 12:58 pm
Posts: 24
ahh.. ok, will try replace the switch, btw is there a way to jump switch on the NAS ?


Top
   
PostPosted: Mon Apr 24, 2017 5:18 pm 
Offline
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2692
I do not understand the question.
There is no jumper.


Top
   
PostPosted: Tue Apr 25, 2017 3:12 am 
Offline
Newbie

Joined: Sun Mar 08, 2015 12:58 pm
Posts: 24
i mean can i use cable to bypass the switch to turn on the NAS ?


Top
   
PostPosted: Tue Apr 25, 2017 6:22 am 
Offline
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2692
if the switch is demaged you can use a cable to connect the pads in ON- Position.

please stop full quoting me, use reply on button of the site


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 10 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited