i have problem with my buffalo NAS LS-CHL V2. The Nas wont turn on, there is no light indicator at all. the only led show is the power (green) and the LAN (blinking green).
this is some step i already done :
- already take apart the NAS and remove the HDD and backup all my data
- already try to boot fron TFTP boot, there is no response.
Preparing to write TFTP configuration settings.
TFTP Configuration settings have been written.
TFTP Server Multithreaded Version 1.4 Windows Built 1.400
alias / is mapped to C:\TFTP_Boot_Recovery_1.24_All_4_Models_2\TFTP Boot Recovery 1.24 All 4 Models\
listening On: 192.168.111.164:69
listening On: 192.168.11.1:69
listening On: 127.0.0.1:69
listening On: 172.19.80.1:69
permitted clients: all
server port range: all
max blksize: 65464
defult blksize: 512
default interval: 3
overwrite existing files: No
thread pool size: 1
- already try to get in to EM mode but it seem i can not get into EM Mode
so the question now is my NAS is still recoverable ? is there something i can still try to save my NAS ?