Buffalo NAS-Central Forums
http://forum.buffalo.nas-central.org/

Buffalo just stopped to work
http://forum.buffalo.nas-central.org/viewtopic.php?f=71&t=28221
Page 1 of 1

Author:  tal [ Wed Dec 25, 2013 12:57 pm ]
Post subject:  Buffalo just stopped to work

It does answers to ping but it is not shown in network nor let access via http.

I treid to update firmware but this is what i get from updater

HOST: LS-CHL-V2-EM769
WORKGROUP: UNKNOWN
IP-add: 192.168.1.66
SUBNETMASK: 255.255.255.0
FIRMWARE vER. --------

AND AFTER PUSHIN UPDATE

"Could not confirm whether the partition exists.
Cannot update the firmware

Firmware upating is aborted"

Any thoughts ?

Reg.Tommi

Author:  kenatonline [ Thu Dec 26, 2013 9:00 am ]
Post subject:  Re: Buffalo just stopped to work

Seems as if the one of the first two partitions got
screwed up.
If a firmware update with the IDENTICAL firmware
without partitioning does not solve the problem,
you will need to extract the disk, connect it to a
PC and repair the partition manually.

Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/