Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Tue Oct 24, 2017 1:24 am

All times are UTC+01:00




Post new topic  Reply to topic  [ 79 posts ]  Go to page Previous 1 2 3 4 5 6 Next
Author Message
PostPosted: Wed Feb 20, 2013 11:55 am 
Offline
Regular Member
User avatar

Joined: Mon Jun 18, 2012 2:12 pm
Posts: 116
No, i did not test every packet. This is a clean bootstrap with minimal device specific changes, so it should behave like a normal debian installation. I would suggest you to check the permissions on /var/log/lighttpd/.

_________________
## Linkstation LS-CHLv2 and LS-XHL stuff:
Debian 7 Wheezy - Rootfs
Kernel 3.13


Top
   
PostPosted: Sat Mar 23, 2013 2:07 pm 
Offline
Newbie

Joined: Sat Mar 23, 2013 3:31 am
Posts: 10
Will this work in LS-VL? I follow fjen instructions to install a 3.7 kernel and ended up in a reboot loop...


Top
   
PostPosted: Thu Mar 28, 2013 1:58 pm 
Offline
Regular Member
User avatar

Joined: Mon Jun 18, 2012 2:12 pm
Posts: 116
katossi wrote:
Will this work in LS-VL? I follow fjen instructions to install a 3.7 kernel and ended up in a reboot loop...

did it run with the 3.6 kernel? there are reports of successful installations on the LS-VL.

_________________
## Linkstation LS-CHLv2 and LS-XHL stuff:
Debian 7 Wheezy - Rootfs
Kernel 3.13


Top
   
PostPosted: Sat Mar 30, 2013 4:32 pm 
Offline
Newbie

Joined: Sat Mar 23, 2013 3:31 am
Posts: 10
None of your images worked in my LS-VL ending up with a boot loop.

Surprisingly the instructions from stone viewtopic.php?f=19&t=25297&hilit=+root+fs worked without a problem (squeeze and stock kernel in that one...).

I don´t know what the problem could be, but I think it´s related to the kernel AND wheezy.

Regards,

Guillermo


Top
   
PostPosted: Mon Apr 01, 2013 11:15 pm 
Offline
Regular Member
User avatar

Joined: Mon Jun 18, 2012 2:12 pm
Posts: 116
katossi wrote:
I don´t know what the problem could be, but I think it´s related to the kernel AND wheezy.

The base wheezy image isn't specific to the LS-CHLv2. It only depends on the kernel. You could try the kernel and modules from your working installation instead.

_________________
## Linkstation LS-CHLv2 and LS-XHL stuff:
Debian 7 Wheezy - Rootfs
Kernel 3.13


Top
   
PostPosted: Fri May 31, 2013 3:38 pm 
Offline
Regular Member
User avatar

Joined: Mon Jun 18, 2012 2:12 pm
Posts: 116
I uploaded an updated image with the newest packages from stable debian wheezy. Kernel is now 3.9.2. Please read the corresponding info for further instructions.
If you are running the old image, you can "apt-get update && apt-get dist-upgrade" to be up to date. You can also install a newer kernel from my other thread if you like.

_________________
## Linkstation LS-CHLv2 and LS-XHL stuff:
Debian 7 Wheezy - Rootfs
Kernel 3.13


Top
   
PostPosted: Thu Jul 11, 2013 2:39 am 
Offline
Total Newbie

Joined: Thu Jul 11, 2013 2:34 am
Posts: 4
i have installed successfully on my LS-CHLv2. However, the NAS power doesn't go off when switch off, while Debian already shutdown...

tell me how to solve this plz. Thanks!


Top
   
PostPosted: Thu Jul 11, 2013 8:59 pm 
Offline
Regular Member
User avatar

Joined: Mon Jun 18, 2012 2:12 pm
Posts: 116
Aloha1 wrote:
i have installed successfully on my LS-CHLv2. However, the NAS power doesn't go off when switch off, while Debian already shutdown...

tell me how to solve this plz. Thanks!

System shutdown while power switch not in "off" state: reboot
System shutdown while power switch in "off" state: system shuts down and the nas waits for the switch to go in on-state.
Monitoring of the power switch is not implemented.

this has already been noted in this thread...

_________________
## Linkstation LS-CHLv2 and LS-XHL stuff:
Debian 7 Wheezy - Rootfs
Kernel 3.13


Top
   
PostPosted: Sat Jul 13, 2013 5:50 am 
Offline
Total Newbie

Joined: Thu Jul 11, 2013 2:34 am
Posts: 4
fjen wrote:
Aloha1 wrote:
i have installed successfully on my LS-CHLv2. However, the NAS power doesn't go off when switch off, while Debian already shutdown...

tell me how to solve this plz. Thanks!

System shutdown while power switch not in "off" state: reboot
System shutdown while power switch in "off" state: system shuts down and the nas waits for the switch to go in on-state.
Monitoring of the power switch is not implemented.

this has already been noted in this thread...


is there any way to perform full power off when the power switch in "off" state as Buffalo default firmware?

thanks!


Top
   
PostPosted: Mon Jul 15, 2013 3:37 pm 
Offline
Regular Member
User avatar

Joined: Mon Jun 18, 2012 2:12 pm
Posts: 116
Aloha1 wrote:
is there any way to perform full power off when the power switch in "off" state as Buffalo default firmware?

I think this state is not different from performing a shutdown with the original firmware. But i never needed this Device to be "off", so i may be wrong.
There are some changes to the shutdown process in the newer kernels (3.10+), maybe they change something.

_________________
## Linkstation LS-CHLv2 and LS-XHL stuff:
Debian 7 Wheezy - Rootfs
Kernel 3.13


Top
   
PostPosted: Wed Jul 24, 2013 10:04 am 
Offline
Total Newbie

Joined: Wed Jul 24, 2013 9:56 am
Posts: 2
Hey fjen,

I downloaded your tars and extracted them to my harddisk.
First of all: Thanks for the great work. I've not been able to manage Firmware-recovery with stock buffalo tools. Your tars brought my linkstation back to live, yay :)

However, i typed 'uname -r' in ssh recently, and despite your kernel 3.9.2-fjen-1 seems to be the only one in the entire filesystem ( /boot & /lib/modules/ ), uname sayes it's '2.6.32-45-fjen-1'. Can you figure this out?

D'oh!

[solved]

Used to work on /boot all the time, didn't notice it was the folder, not the mount!

Code:
mount /boot
did the trick.

Now I see your 3.9.2-deb didn't recognize this too, and installed itself properly to my /boot folder, without replacing the 'real' files.

Notice: first mount /boot, then install new kernel ;)


Top
   
PostPosted: Thu Jul 25, 2013 6:57 pm 
Offline
Regular Member
User avatar

Joined: Mon Jun 18, 2012 2:12 pm
Posts: 116
ArcTanH wrote:
Used to work on /boot all the time, didn't notice it was the folder, not the mount!

Code:
mount /boot
did the trick.

Oh, i forgot to mention this step in the kernel thread. fixed :)

_________________
## Linkstation LS-CHLv2 and LS-XHL stuff:
Debian 7 Wheezy - Rootfs
Kernel 3.13


Top
   
PostPosted: Sat Jul 27, 2013 11:37 am 
Offline
Newbie

Joined: Fri Nov 30, 2012 11:44 pm
Posts: 27
Not sure if it is a "problem" but in your introduction you say that:
boot should be ext3
and in your fstab it is ext4..


Top
   
PostPosted: Sat Jul 27, 2013 1:37 pm 
Offline
Regular Member
User avatar

Joined: Mon Jun 18, 2012 2:12 pm
Posts: 116
ext2/3 can be mounted with the ext4 module. this is no problem at all. boot must be ext3, because uboot wants to read from that.

_________________
## Linkstation LS-CHLv2 and LS-XHL stuff:
Debian 7 Wheezy - Rootfs
Kernel 3.13


Top
   
PostPosted: Sat Jul 27, 2013 4:32 pm 
Offline
Newbie

Joined: Fri Nov 30, 2012 11:44 pm
Posts: 27
ok. thx..!

do you have an idea why the hostname is not shown in my network? all other devices show their name correctly..

hostname=> linkstation
hostname -d=> local
hostname -f=> linkstation.local

but if i scan my network the hostname of the linkstation is blank.. also ping linkstation.local does not work..


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 79 posts ]  Go to page Previous 1 2 3 4 5 6 Next

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited