Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Fri Nov 24, 2017 6:53 am

All times are UTC+01:00




Post new topic  Reply to topic  [ 168 posts ]  Go to page Previous 17 8 9 10 11 12 Next
Author Message
PostPosted: Thu Mar 06, 2014 4:08 pm 
Offline
Newbie

Joined: Wed Dec 21, 2011 10:39 am
Posts: 56
I have latest Shonk Firmware on my lschlv2,
can I update the Kernel, using your files.
The main aim is to control the speed of fan, it seems to be running full speed all them time, hence noise issue.
Other issue is if I put the power switch on Auto, if there are no activities it will go off, but have to manually restart it, what can I do to resolve this?

Thanks


Top
   
PostPosted: Thu Mar 06, 2014 5:01 pm 
Offline
Regular Member
User avatar

Joined: Mon Jun 18, 2012 2:12 pm
Posts: 116
No, this kernel is not for original/modded firmwares. It's for people running full linux distributions on that piece of hardware.
If your fan is too loud, unplug it. It is not needed as far as i can tell, because the only real heat source is the hdd.
This is not the right place for your firmware problems.

_________________
## Linkstation LS-CHLv2 and LS-XHL stuff:
Debian 7 Wheezy - Rootfs
Kernel 3.13


Top
   
PostPosted: Sun Mar 09, 2014 3:33 am 
Offline
Newbie

Joined: Tue May 31, 2011 5:56 pm
Posts: 6
fjen wrote:
This is not a firmware, this is a kernel. And yes, >2TB should be no problem as we use GPT partitioning and do not have this magical limit.

Thanks fjen ,
It's keep red light, I used your rootfs and kernel, with 3TB WD Red and LS-XHL


Top
   
PostPosted: Sun Mar 09, 2014 12:23 pm 
Offline
Regular Member
User avatar

Joined: Mon Jun 18, 2012 2:12 pm
Posts: 116
bluke wrote:
It's keep red light, I used your rootfs and kernel, with 3TB WD Red and LS-XHL

A friend runs a LS-CHLv2 with a 3TB drive. Check your setup again. Make sure you used GPT partitioning and replaced the kernel.

_________________
## Linkstation LS-CHLv2 and LS-XHL stuff:
Debian 7 Wheezy - Rootfs
Kernel 3.13


Top
   
PostPosted: Thu Mar 13, 2014 10:23 am 
Offline
Newbie

Joined: Fri Nov 30, 2012 11:44 pm
Posts: 27
I would like to update my kernel.
I never used the deb installation before. can update like described in the 1st post

Quote:
### Installation
mount /boot
Install deb matching your device (dpkg -i linux-image-...lschlv2.deb OR dpkg -i linux-image-...lsxhl.deb)
Link kernel to /boot/uImage.buffalo (cd /boot; ln -fs uImage.buffalo.3.... uImage.buffalo)
Place empty initrd in /boot and copy or link it to /boot/initrd.buffalo (cd /boot; ln -fs initrd.buffalo.empty initrd.buffalo)
Remove the Buffalo specific /etc/init.d/lsmonitor script from blstools and use this one instead: http://neboola.de/fjen/lschlv2/lsmonitor/
Do not use a >=3.6 kernel with an old lsmonitor script or you will be stuck in a bootloop.


I am now on kernel 3.9.2-fjen-1


Top
   
PostPosted: Thu Mar 13, 2014 10:54 am 
Offline
Regular Member
User avatar

Joined: Mon Jun 18, 2012 2:12 pm
Posts: 116
mentex wrote:
I would like to update my kernel.

You can skip some steps from the first post. They are for people coming from an "buffalo" kernel. I will change the text there.
You just need to:
Code:
1. mount /boot
2. install deb: dpkg -i linux-image-3.13.3-fjen-1-lschlv2.deb
3. link the kernel: cd /boot; ln -fs uImage.buffalo.3.13.3-fjen-1 uImage.buffalo

_________________
## Linkstation LS-CHLv2 and LS-XHL stuff:
Debian 7 Wheezy - Rootfs
Kernel 3.13


Top
   
PostPosted: Thu Mar 13, 2014 11:39 am 
Offline
Newbie

Joined: Fri Nov 30, 2012 11:44 pm
Posts: 27
Worked!! :up: thx


Top
   
PostPosted: Thu Mar 13, 2014 11:43 pm 
Offline
Newbie

Joined: Fri Nov 30, 2012 11:44 pm
Posts: 27
unfortunately i have now the problem that the fan control not working.

I used this lsmonitor http://neboola.de/fjen/lschlv2/lsmonito ... _kernel3.8

I do not have the folders:
/sys/devices/gpio_leds.2/ but /sys/devices/gpio_leds.3/

/sys/bus/platform/drivers/gpio-fan/gpio_fan.3 but /sys/bus/platform/drivers/gpio-fan/gpio_fan.4


Top
   
PostPosted: Fri Mar 14, 2014 1:19 am 
Offline
Regular Member
User avatar

Joined: Mon Jun 18, 2012 2:12 pm
Posts: 116
Adjust it to your environment and restart the script with "/etc/init.d/lsmonitor restart"
Or try unplugging the fan, i used my ls without it.

_________________
## Linkstation LS-CHLv2 and LS-XHL stuff:
Debian 7 Wheezy - Rootfs
Kernel 3.13


Top
   
PostPosted: Wed Mar 26, 2014 3:30 pm 
Offline
Newbie

Joined: Sun Feb 16, 2014 11:26 am
Posts: 13
Also I'm using my linkstation without fan.
I've configured zram, vpn, iptables and everything worked well!
But I wasn't able to set up nftables, they are already included in 3.13.3 kernel? I'm tried to use nft command, but was not found. Where I'm wrong?


Top
   
PostPosted: Wed Mar 26, 2014 4:58 pm 
Offline
Regular Member
User avatar

Joined: Mon Jun 18, 2012 2:12 pm
Posts: 116
This kernel as of 3.13.3 has support for nftables, but we currently do not have any userland tools for that in debian. https://bugs.debian.org/cgi-bin/bugrepo ... bug=736973
You need to compile them yourself. This may help: https://home.regit.org/netfilter-en/nft ... ick-howto/

_________________
## Linkstation LS-CHLv2 and LS-XHL stuff:
Debian 7 Wheezy - Rootfs
Kernel 3.13


Top
   
PostPosted: Thu Mar 27, 2014 12:37 pm 
Offline
Newbie

Joined: Sun Feb 16, 2014 11:26 am
Posts: 13
ok, thanks!

edit: I have another problem, I can't configure nat iptable:
# iptables v1.4.14: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
# Perhaps iptables or your kernel needs to be upgraded.


Top
   
 Post subject: 3.13.7
PostPosted: Thu Mar 27, 2014 2:33 pm 
Offline
Regular Member
User avatar

Joined: Mon Jun 18, 2012 2:12 pm
Posts: 116
There was an iptables module missing. Here is 3.13.7 for you to fix this.

_________________
## Linkstation LS-CHLv2 and LS-XHL stuff:
Debian 7 Wheezy - Rootfs
Kernel 3.13


Top
   
PostPosted: Fri Mar 28, 2014 8:14 pm 
Offline
Newbie

Joined: Sun Feb 16, 2014 11:26 am
Posts: 13
thanks!


Top
   
PostPosted: Tue May 20, 2014 12:15 pm 
Offline
Newbie

Joined: Sun Feb 16, 2014 11:26 am
Posts: 13
Kernel 3.14.4 installed! :up:


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 168 posts ]  Go to page Previous 17 8 9 10 11 12 Next

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited