Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Wed Jun 20, 2018 2:40 pm

All times are UTC+01:00




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Twonky show files twice
PostPosted: Thu Jan 12, 2012 4:43 pm 
Offline
Newbie

Joined: Wed Dec 21, 2011 10:39 am
Posts: 56
Hi,

I have twonky (6.0.38) installed on a Linkstation live V2 (LS-CHL V2) with shonk 1.54 modified firmware.
The only problem I have is all the films are listed twice.
I searched the forum and couldn't find anything.
Does anyone know how to fix this issue.

My second question, is it possible to connect the NAS directly to TV without use of router.

Thanks


Top
   
PostPosted: Thu Jan 12, 2012 6:54 pm 
Offline
Newbie

Joined: Wed Nov 10, 2010 3:54 pm
Posts: 39
Location: Denmark
foxy6800 wrote:
Does anyone know how to fix this issue.
Had you ben updating Twonky or is it a fresh installation ?
Had you try to rebuild the database ?
Do you have any folders in the search structure (as Twonky see it) with the name ".recycle" or simerly, then there may lay an other structure/set of your files there ?

Quote:
My second question, is it possible to connect the NAS directly to TV without use of router.
Yes, you may have to use fixed IP setup.


Top
   
PostPosted: Fri Jan 13, 2012 12:11 pm 
Offline
Newbie

Joined: Wed Dec 21, 2011 10:39 am
Posts: 56
Hello and thanks for reply

Its s fresh install, I followed instructions on here
Quote:
Disable the DNLA server in Buffalo web interface [Extensions/Media Server]
Connect by SSH

# /etc/init.d/twonky.sh stop
# chmod -x /etc/init.d/twonky.sh
# mkdir /mnt/disk1/share/twonky
# mkdir /mnt/disk1/share/twonkymedia
# mkdir /mnt/disk1/share/twonky/twonkydb

This is where any uploads are stored - I have never used this feature

# cd /mnt/disk1/share/twonky
# wget http://www.twonkyforum.com/downloads/6. ... 6.0.34.zip
# unzip twonkymedia-kirkwood-6.0.34.zip
# ./twonkymedia -appdata /mnt/disk1/share/twonky/twonkydb

Wait a few seconds then

# killall twonkymedia
# rm twonkymedia-server-default.ini
# cd twonkydb
# rm twonkymedia-server.ini
# wget http://dl.dropbox.com/u/5877837/twonkymedia-server.ini
# cd /etc/init.d
# wget http://dl.dropbox.com/u/5877837/twonkymedia.sh
# chmod 755 twonkymedia.sh
# ln -s /etc/init.d/twonkymedia.sh /etc/rc.d/extensions.d/S91twonky.sh
# reboot
I would also recommend chmod a+rw /mnt/disk1/share/twonky/twonkydb/twonkymedia-server.ini so that you can edit it with a text editor such as Notepad++ on windows or gedit on gnome for example.


then used Http://myip:9000 and in setting picked "/mnt/share/Film" as the directory of my films
I haven't changed anything else.

Thanks for your help


Top
   
PostPosted: Fri Jan 13, 2012 1:18 pm 
Offline
Newbie

Joined: Wed Nov 10, 2010 3:54 pm
Posts: 39
Location: Denmark
foxy6800 wrote:
Hello and thanks for reply

Its s fresh install, I followed instructions on here
Quote:
Disable the DNLA server in Buffalo web interface [Extensions/Media Server]
Connect by SSH

# /etc/init.d/twonky.sh stop
# chmod -x /etc/init.d/twonky.sh
# mkdir /mnt/disk1/share/twonky
# mkdir /mnt/disk1/share/twonkymedia
# mkdir /mnt/disk1/share/twonky/twonkydb

This is where any uploads are stored - I have never used this feature

# cd /mnt/disk1/share/twonky
# wget http://www.twonkyforum.com/downloads/6. ... 6.0.34.zip
# unzip twonkymedia-kirkwood-6.0.34.zip
# ./twonkymedia -appdata /mnt/disk1/share/twonky/twonkydb

Wait a few seconds then

# killall twonkymedia
# rm twonkymedia-server-default.ini
# cd twonkydb
# rm twonkymedia-server.ini
# wget http://dl.dropbox.com/u/5877837/twonkymedia-server.ini
# cd /etc/init.d
# wget http://dl.dropbox.com/u/5877837/twonkymedia.sh
# chmod 755 twonkymedia.sh
# ln -s /etc/init.d/twonkymedia.sh /etc/rc.d/extensions.d/S91twonky.sh
# reboot
I would also recommend chmod a+rw /mnt/disk1/share/twonky/twonkydb/twonkymedia-server.ini so that you can edit it with a text editor such as Notepad++ on windows or gedit on gnome for example.

That looks like an update on an existing version, what version did you have before the update ?

Had you try to search for all films on your box ? Just to compare with the number that Twonky finds ?


Quote:
then used Http://myip:9000 and in setting picked "/mnt/share/Film" as the directory of my films
So you have only one selection on Http://myip:9000/config | "Sharing" | "Content Locations:" (and one that is blank) ?

Server status is OK, no pending restart ?

Have a look at your log under "Maintenance", if not enable, then enable and restart Twonky, wait for it to finish scanning of shared medias and then look in the log.
May be you should "Clear log" and do a "Rebuild Databse", wait some time for all to finish, and then look in the log.


Top
   
PostPosted: Fri Jan 13, 2012 3:40 pm 
Offline
Newbie

Joined: Wed Dec 21, 2011 10:39 am
Posts: 56
Hi,

I carried out the above procedure right after installing "shonk 1.54 modified firmware" (formatted HDD)
So, not sure if this firmware contains any version of twonky.
./twonkymedia.sh status returns server running
I have only copied about five films to see if it’s working, but each film listed twice on Sony Bluray.
Just like to sort it out before copying rest of my films.
I will try the log file tomorrow.

Thanks again


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited