Take a look on your Windows Firewall. This could block the UDP-Ports from the Navigator...
I have a TS5200 and use a selfmade Tool (derivated from the ACP-Commander) to shutdown the NAS remotely.
The switch on the backsite is on manual.
You can use the ACP-Commander for Test.viewtopic.php?f=19&t=1693&start=150
Thank you for the reply.
I will test to turn the FW off and see if there's any difference.
As for the remote shutdown...that was way over my head.
I'm just a bit concerned, In the manual it says to press the Power switch twice to do a shutdown. Nothing happens when I do so. So I press and hold the power buton for 5-7 seconds, and then it goes into some standby-ish mode with the LED still on.
Am I doing something wrong here or what is up with this shutdown thing.