Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Mon Nov 20, 2017 1:02 pm

All times are UTC+01:00




Post new topic  Reply to topic  [ 7 posts ] 
Author Message
 Post subject: How to compile Kernel ?
PostPosted: Wed Jan 02, 2013 11:20 pm 
Offline
Newbie

Joined: Wed Jan 02, 2013 11:13 pm
Posts: 9
Hi !

I m new on this Forum, and newbie with NAS.

I know Linux environment.

I have get one Buffalo Terastation III (4x500Gb).

I have rooted this, and installed Debian Squeeze on it, all works.

But, now, I need change my Kernel, to get OpenVPN working.

My actual Kernel (Linux TS-XEL2E6-Debian 2.6.31.8-88f6281 #5 Thu Jul 12 08:35:23 JST 2012 armv5tel GNU/Linux) doesn't have /proc.config.gz.

I need this file, and need kernel source, with patchs.

Where, or how to get them ?

Regards,

Gaël

PS : This can help :
Code:
root@TS-XEL2E6-Debian:~# cat /proc/buffalo/board_info 
BoardId=94
BoardName=MVTSXEL
root@TS-XEL2E6-Debian:~# cat /proc/buffalo/firmware
SERIES=TeraStation
PRODUCTNAME=TS-XEL(BIDATSU)
VERSION=0.16
SUBVERSION=FLASH 0.00
PRODUCTID=0x00002010
BUILDDATE=2012/07/12 08:28:04
BOOTVER=3.01
root@TS-XEL2E6-Debian:~# cat /proc/cpuinfo
Processor   : Feroceon 88FR131 rev 1 (v5l)
BogoMIPS   : 1199.30
Features   : swp half thumb fastmult edsp
CPU implementer   : 0x56
CPU architecture: 5TE
CPU variant   : 0x2
CPU part   : 0x131
CPU revision   : 1

Hardware   : Feroceon-KW
Revision   : 0000
Serial      : 0000000000000000
root@TS-XEL2E6-Debian:~#


Top
   
PostPosted: Thu Jan 03, 2013 9:20 am 
Offline
Moderator

Joined: Fri Jun 29, 2007 10:39 am
Posts: 2604
How about this?
http://opensource.buffalo.jp/

_________________
Please do not use private mail (PN/M) to ask questions. Use the proper forum instead. (me)

If there is no verified backup of a dataset, the dataset, by definition, is unimportant. (c't 2012)

RAID (no matter which level) never ever substitutes a backup. (me)


Top
   
PostPosted: Thu Jan 03, 2013 9:44 am 
Offline
Newbie

Joined: Wed Jan 02, 2013 11:13 pm
Posts: 9
This night I have compiled one kernel from this page :

TS-XL/R5,TS-WXL/R1,TS-WXL/1D,TS-RXL/R5 series
Firmware version 1.06 or later
--> linux-2.6.22.18_mv78lsp2.0.2

It's old, but, if I can boot it, I m happy.

I have now uImage.

I try to boot the image, but I don't really understand how work boot process of the NAS, and u-boot.

When I replace the "/boot/uImage.buffalo" file, the system boot, but, I m still on my origial Kernel :
Linux TS-XEL2E6-Debian 2.6.31.8-88f6281 #5 Thu Jul 12 08:35:23 JST 2012 armv5tel GNU/Linux


Strange ...


Top
   
PostPosted: Mon Feb 04, 2013 3:43 pm 
Offline
Newbie

Joined: Sun Sep 11, 2011 9:00 am
Posts: 5
It may not be relevant to your topic and I apologize in advance, but how did you install debian on your terastation III??? I searched a for a lot of guides on TSIII and the TS Duo, got nada???

Thanks in advance!!!!!


Top
   
PostPosted: Mon Feb 04, 2013 4:06 pm 
Offline
Newbie

Joined: Wed Jan 02, 2013 11:13 pm
Posts: 9
I use a lot of thing of this tutorial :

http://buffalo.nas-central.org/wiki/Deb ... _on_LS-WXL

For rooting the NAS I use this :

viewtopic.php?f=70&t=22624

For Kernel compilation I use that :
root@TS-XEL:~# ls /usr/src/
gptfdisk-0.8.6 gptfdisk-0.8.6.tar.gz LS-Series_linux-2.6.31.8 LS-Series_linux-2.6.31.8.tar.bz2

Now I have the NAS with full Debian, working, the LCD works olso (need changes the initrd.buffalo)

To avoid errors, you can works with 1 disk.

I olso use a Linux Pc and a dock, when I have make mistakes.

I didn't change ROM or other, only change /bon/uImage-88f6281.buffalo by mine kernel and /boot/initrd.buffalo by mine initrd with LCD support.

Regards,

Gaël.


Top
   
PostPosted: Mon Feb 04, 2013 5:23 pm 
Offline
Newbie

Joined: Sun Sep 11, 2011 9:00 am
Posts: 5
Thank you for the kind reply but did you create INITRD???


Top
   
 Post subject: reply
PostPosted: Mon Feb 04, 2013 5:30 pm 
Offline
Newbie

Joined: Wed Jan 02, 2013 11:13 pm
Posts: 9
Yes, I use the tutorial to make my first and 2nd initrd.

When Debian works, the LCD doesn't works.

I extract the original initrd, and change the root device, and now, I have LCD working.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited