Now uploaded https://sourceforge.net/projects/ppc-evtd/
Sorry about the delay. Needed to make sure that all the changes were working okay (there have been quite a few).
does avr_evtd 1.7.1 need the a certain kernel version in order to function properly?
No it does not need anything specific at all.
should EMMODE=YES and a >20sec init button press force a reboot into EM mode on any HG model, or does this only work for the original LS1 & LS2?
You only need to set EMMODE=YES if you need the EM mode reboot option which as you say needs the reset button held for 20+seconds. This should work fine on the LS1 and LS2 but I have issues with running this on my HG with anything other than 2.4.x of the kernel loaded. It is fine on my LS1 with the 2.6.x kernel. If the event is triggered, which it must be as you have seen the E in the log, then the only reason for the failure is as a result of the flash device not being detected. If you can try out 1.7.2 and see if the problem persists. If so, i may get you to test some code if that is okay
@andre: Sorry if I missed the v54 drop. I have been busy with the LS PRO and testing and wnated to make sure this drop was okay for the LCD plugin too.