Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Thu Nov 23, 2017 8:34 am

All times are UTC+01:00




Post new topic  Reply to topic  [ 20 posts ]  Go to page Previous 1 2
Author Message
PostPosted: Sun Mar 08, 2015 10:30 pm 
Online
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2691
If you realy have a LS-VL and E07, then you have a hardware damage. TFTP will only work on E06 on Kirkwood mashines.


Top
   
PostPosted: Mon Mar 09, 2015 8:33 am 
Offline
Newbie

Joined: Mon Feb 09, 2015 10:28 pm
Posts: 15
hi Oxygen,

i boot my laptop on knoppix and attached hdd on cavalry bridge and fired some commands you mentioned in the post. here is the output

knoppix@Microknoppix:/tmp$ file -s /dev/sdd*
/dev/sdd: ERROR: sticky cannot read `/dev/sdd' (Input/output error)
/dev/sdd1: writable, no read permission
/dev/sdd10: writable, no read permission
/dev/sdd11: writable, no read permission
/dev/sdd12: writable, no read permission
/dev/sdd13: writable, no read permission
/dev/sdd14: writable, no read permission
/dev/sdd15: writable, no read permission
/dev/sdd2: writable, no read permission
/dev/sdd3: writable, no read permission
/dev/sdd4: writable, no read permission
/dev/sdd5: writable, no read permission
/dev/sdd6: writable, no read permission
/dev/sdd7: writable, no read permission
/dev/sdd8: writable, no read permission
/dev/sdd9: writable, no read permission


knoppix@Microknoppix:/tmp$ ls -l /dev/sdd*
brw-rw---T 1 root floppy 8, 48 Mar 8 22:09 /dev/sdd
brw-rw---- 1 root disk 8, 49 Mar 8 21:26 /dev/sdd1
brw-rw---- 1 root disk 8, 58 Mar 8 21:26 /dev/sdd10
brw-rw---- 1 root disk 8, 59 Mar 8 21:26 /dev/sdd11
brw-rw---- 1 root disk 8, 60 Mar 8 21:26 /dev/sdd12
brw-rw---- 1 root disk 8, 61 Mar 8 21:26 /dev/sdd13
brw-rw---- 1 root disk 8, 62 Mar 8 21:26 /dev/sdd14
brw-rw---- 1 root disk 8, 63 Mar 8 21:26 /dev/sdd15
brw-rw---- 1 root disk 8, 50 Mar 8 21:26 /dev/sdd2
brw-rw---- 1 root disk 8, 51 Mar 8 21:26 /dev/sdd3
brw-rw---- 1 root disk 8, 52 Mar 8 21:26 /dev/sdd4
brw-rw---- 1 root disk 8, 53 Mar 8 21:26 /dev/sdd5
brw-rw---- 1 root disk 8, 54 Mar 8 21:26 /dev/sdd6
brw-rw---- 1 root disk 8, 55 Mar 8 21:26 /dev/sdd7
brw-rw---- 1 root disk 8, 56 Mar 8 21:26 /dev/sdd8
brw-rw---- 1 root disk 8, 57 Mar 8 21:26 /dev/sdd9

knoppix@Microknoppix:/tmp$ sudo mount -t xfs /dev/sdd2 lst10
mount: /dev/sdd2 is not a valid block device



so it looks like i cant mount anything ... any idea or suggestion ?


Top
   
PostPosted: Mon Mar 09, 2015 8:36 am 
Offline
Newbie

Joined: Mon Feb 09, 2015 10:28 pm
Posts: 15
oh i did not see this msg ..thx and yes i have LS-VL NAS ... i tried on the usb enclosure ..pl see the post above.
oxygen8 wrote:
If you realy have a LS-VL and E07, then you have a hardware damage. TFTP will only work on E06 on Kirkwood mashines.


Top
   
PostPosted: Tue Mar 17, 2015 8:15 pm 
Offline
Newbie

Joined: Mon Feb 09, 2015 10:28 pm
Posts: 15
Anyone has any suggestion?

rgirish wrote:
hi Oxygen,

i boot my laptop on knoppix and attached hdd on cavalry bridge and fired some commands you mentioned in the post. here is the output

knoppix@Microknoppix:/tmp$ file -s /dev/sdd*
/dev/sdd: ERROR: sticky cannot read `/dev/sdd' (Input/output error)
/dev/sdd1: writable, no read permission
/dev/sdd10: writable, no read permission
/dev/sdd11: writable, no read permission
/dev/sdd12: writable, no read permission
/dev/sdd13: writable, no read permission
/dev/sdd14: writable, no read permission
/dev/sdd15: writable, no read permission
/dev/sdd2: writable, no read permission
/dev/sdd3: writable, no read permission
/dev/sdd4: writable, no read permission
/dev/sdd5: writable, no read permission
/dev/sdd6: writable, no read permission
/dev/sdd7: writable, no read permission
/dev/sdd8: writable, no read permission
/dev/sdd9: writable, no read permission


knoppix@Microknoppix:/tmp$ ls -l /dev/sdd*
brw-rw---T 1 root floppy 8, 48 Mar 8 22:09 /dev/sdd
brw-rw---- 1 root disk 8, 49 Mar 8 21:26 /dev/sdd1
brw-rw---- 1 root disk 8, 58 Mar 8 21:26 /dev/sdd10
brw-rw---- 1 root disk 8, 59 Mar 8 21:26 /dev/sdd11
brw-rw---- 1 root disk 8, 60 Mar 8 21:26 /dev/sdd12
brw-rw---- 1 root disk 8, 61 Mar 8 21:26 /dev/sdd13
brw-rw---- 1 root disk 8, 62 Mar 8 21:26 /dev/sdd14
brw-rw---- 1 root disk 8, 63 Mar 8 21:26 /dev/sdd15
brw-rw---- 1 root disk 8, 50 Mar 8 21:26 /dev/sdd2
brw-rw---- 1 root disk 8, 51 Mar 8 21:26 /dev/sdd3
brw-rw---- 1 root disk 8, 52 Mar 8 21:26 /dev/sdd4
brw-rw---- 1 root disk 8, 53 Mar 8 21:26 /dev/sdd5
brw-rw---- 1 root disk 8, 54 Mar 8 21:26 /dev/sdd6
brw-rw---- 1 root disk 8, 55 Mar 8 21:26 /dev/sdd7
brw-rw---- 1 root disk 8, 56 Mar 8 21:26 /dev/sdd8
brw-rw---- 1 root disk 8, 57 Mar 8 21:26 /dev/sdd9

knoppix@Microknoppix:/tmp$ sudo mount -t xfs /dev/sdd2 lst10
mount: /dev/sdd2 is not a valid block device



so it looks like i cant mount anything ... any idea or suggestion ?


Top
   
PostPosted: Tue Mar 17, 2015 8:30 pm 
Online
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2691
you have to be root

read http://forum.nas-hilfe.de/buffalo-technology-nas-anleitungen/blaues-blinken-datenrettung-von-einer-durch-stromausfall-nicht-mehr-ansprechbaren-ls-chlv2-t1849.html
Quote:
sudo su -


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 20 posts ]  Go to page Previous 1 2

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited