Buffalo NAS-Central Forums
http://forum.buffalo.nas-central.org/

LS Series 1.71 Mod 1
http://forum.buffalo.nas-central.org/viewtopic.php?f=68&t=23603
Page 58 of 58

Author:  nasy [ Fri Jan 22, 2016 4:20 pm ]
Post subject:  Re: LS Series 1.71 Mod 1

Sorry for the late update.

This is the result of badblocks:
Code:
root@Nas:~# badblocks -b 4096 -s -n -v /dev/disk1_6
Checking for bad blocks in non-destructive read-write mode
From block 0 to 240437500
Checking for bad blocks (non-destructive read-write test)
Testing with random pattern: done
Pass completed, 0 bad blocks found.

So, it found no issues (at least in non-destructive read-write mode)...

I tried memtester with at least the available free RAM. No issues here too.

Today I could reproduce the case quite fast.
This is a sequence of 'ps2 aux' outputs during the bad sceneario:
ps_log.txt

This is a sequence of 'htop' outputs (generated after the ps outputs):
htop_log.txt

As mentioned before, the system is successively getting slower and slower within some minutes and finally not resonding at all. I hope that someone has a hint for me (am still hoping that it's not the disk).

Author:  balaxetamon [ Thu Apr 07, 2016 10:37 am ]
Post subject:  Re: LS Series 1.69 Mod 1

oxygen8 wrote:
load your config from flash
Code:
dumpnf > /etc/nas_feature


edit the mac in the config
Code:
vi /etc/nas_feature


write the config bac to flash
Code:
setnf < /etc/nas_feature


Code:
reboot


Please tell more detail: " edit the mac in the config
Code:
vi /etc/nas_feature
" i dont know how to do it :p
note: i has added " ethaddr=xx:xx:xx:xx " at the end of file etc/nas_feature, then write back to flash but eror: unknow key ethaddr ignored!
Thanks alot for your help :D

Author:  SANGERA2 [ Thu Apr 07, 2016 9:22 pm ]
Post subject:  Re: LS Series 1.68 Mod 1

Shonk wrote:
Transmission update for 1.68 Mod1 if anyone wants it

Code:
wget http://www.shonk.org/linkstation/2.84/transmission-2.84.tar.gz
wget http://www.shonk.org/linkstation/2.84/update.sh
chmod 777 ./transmission*
chmod 777 ./update.sh
./update.sh

Please could Shonk or someone who has already downloaded these files please share them on Dropbox or something. The site is no longer up.

Thanks very much

Author:  itwas [ Thu Oct 06, 2016 7:33 am ]
Post subject:  Re: LS Series 1.68 Mod 1

SANGERA2 wrote:
Shonk wrote:
Transmission update for 1.68 Mod1 if anyone wants it

Code:
wget http://www.shonk.org/linkstation/2.84/transmission-2.84.tar.gz
wget http://www.shonk.org/linkstation/2.84/update.sh
chmod 777 ./transmission*
chmod 777 ./update.sh
./update.sh

Please could Shonk or someone who has already downloaded these files please share them on Dropbox or something. The site is no longer up.

Thanks very much


transmission-2.84.tar.gz
http://www.mediafire.com/file/vacczi46v ... .84.tar.gz
update.sh
Code:
#!/bin/sh

/etc/init.d/bt.sh stop

rm /bin/transmission*
rm -r /usr/local/bt/web
mv ./transmission-2.84.tar.gz /
mv ./update.sh /
cd /
tar -vxz --numeric-owner -p -f ./transmission-2.84.tar.gz
rm /transmission-2.84.tar.gz
rm /update.sh
/etc/init.d/bt.sh start

Author:  tranquyduong [ Thu Jan 12, 2017 1:20 pm ]
Post subject:  Re: LS Series 1.71 Mod 1

ok with CS-WV/R1

Author:  Mottek [ Thu Jul 20, 2017 9:02 pm ]
Post subject:  Re: LS Series 1.71 Mod 1

Hi Fans;

It's a miracle...
...Buffalo spend some time to update there firmware of the LS-WXL to fix the SambaCry-bug...
Quote:
Version 1.73 [2017.7.5]
Bug Fixes
[SMB]
- Modified to deal with a Samba programming vulnerability (CVE-2017-7494).

http://www.buffalo-technology.de/de/support/downloads/?subaction=download-archive&no_cache=1

Is shonk always active?
Can he build a new mod for this firmware?

Many Thanks in front...

Volker

Author:  m0kif [ Tue Jul 25, 2017 8:52 am ]
Post subject:  Re: LS Series 1.71 Mod 1

Quote:
Is shonk always active?
Can he build a new mod for this firmware?


Thumbs up for a new mod! Security fixes are always fine, but ssh access is needed for a good administration.

Author:  oxygen8 [ Tue Jul 25, 2017 9:52 am ]
Post subject:  Re: LS Series 1.71 Mod 1

all Kirkwoods can open ssh with 2 clicks
http://forum.nas-hilfe.de/buffalo-technology-nas-anleitungen/ssh-freischalten-mit-2-klicks-t2468.html

Author:  m0kif [ Tue Jul 25, 2017 3:20 pm ]
Post subject:  Re: LS Series 1.71 Mod 1

oxygen8 wrote:


Thank you very much! didn't know that. It works perfectly. :up:

Let's wait the new 1.73 mod for more functionalities

Author:  theblacksquirel [ Wed Aug 02, 2017 9:03 am ]
Post subject:  Re: LS Series 1.71 Mod 1

Hello,

I'm new here and i speak french (sorry for my bad english).
I bought 4 harddrives WD Red 4TO (WD40EFRX) but it's not working and it's said in Indonesia, it's not compatible.
Do you think this is a problem with 4k disks ? And the 1.71 Mod 1 can help me ?

Thank you in advance for your help or suggestions.

Author:  oxygen8 [ Wed Aug 02, 2017 3:37 pm ]
Post subject:  Re: LS Series 1.71 Mod 1

All devices with Kirkwood-CPU can use the new drives with 4096 Bytes per sector
with new drives you have to start with E06
red blinking

read about tftp

the firmware makes no differences

Page 58 of 58 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/