Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Sun Dec 17, 2017 1:05 pm

All times are UTC+01:00




Post new topic  Reply to topic  [ 866 posts ]  Go to page Previous 154 55 56 57 58 Next
Author Message
 Post subject: Re: LS Series 1.69 Mod 1
PostPosted: Sun Mar 22, 2015 9:23 am 
Offline
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2692
modify
LSUpdater.ini


Quote:
VersionCheck = 0
NoFormatting = 0
[SpecialFlags]
Debug = 1


start lsupdater.exe
klick on golden rings
select debug
Image

flash the fw


Top
   
 Post subject: Re: LS Series 1.69 Mod 1
PostPosted: Sun Mar 22, 2015 12:37 pm 
Offline
Newbie

Joined: Tue Dec 21, 2010 7:25 am
Posts: 9
Hi Oxygen8!

Ls-WVL replace new blank hdd need run TFTP server?
My ls-wvl failt hdd (current running 1 disk in slot 1), when i replace new blank hdd in slot 1, ls boot and red led blink, i much run TFTP on 192.168.1.1 to turn my ls into EM mode, nav soft found and i was flash 1.69mod1 include flex server of your post. After formatting hdd it have red led slot 2 on hdd board light, after flash finished ls reboot but only red led blink 16 nav soft don't found any ls, i much run TFTP again on 192.168.11.1 and press func bt, then amble led blink, after reboot my ls have old ip, old folders share ( can't access) and red led blink 16, 22 nav found error. No disk 2.

Can you explant why my ls have old setting config with new blank hdd replaced and why i much run TFTP again after flashed firmware. I want to have new fresh install, may i need reset nvram? And how to reset nvram?

Thanks Oxygen8 ( sorry my english so bad!!!)


Top
   
 Post subject: Re: LS Series 1.69 Mod 1
PostPosted: Sun Mar 22, 2015 6:58 pm 
Offline
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2692
Quote:
I want to have new fresh install,

the use the debug option "delete user config"

Quote:
may i need reset nvram
?
no


Top
   
 Post subject: Re: LS Series 1.69 Mod 1
PostPosted: Sun Mar 22, 2015 11:39 pm 
Offline
Newbie

Joined: Tue Dec 21, 2010 7:25 am
Posts: 9
In Debug option of your build plex server don't "delete user config" it have "delete user data partition".

i was download build 1.37, 1.60 have delete user config, i will try again.

But where old user config store to have on new blank hdd replaced and why i much run TFTP again after flash firmware finished, i need run TFTP with nas connect direct to PC on first time boot to EM?

Thanks!


Top
   
 Post subject: Re: LS Series 1.69 Mod 1
PostPosted: Mon Mar 23, 2015 6:35 pm 
Offline
Newbie

Joined: Mon Mar 23, 2015 6:20 pm
Posts: 6
Thanks a lot :biglol:


Top
   
 Post subject: Re: LS Series 1.69 Mod 1
PostPosted: Wed May 20, 2015 2:56 am 
Offline
Total Newbie

Joined: Wed May 20, 2015 2:51 am
Posts: 3
I have followed the instructions to the T and i am still unable to access Transmission on a fresh flash of 1.69 MOD1 i even ran the transmission update.. i do not have an option in the web config for transmission and my version is just 1.69... I am not sure what i'm doing wrong or whats wrong.. I grabbed the download from the Personal Cloud Link.. its a brand new LS-QVL 4 Bay I have 4x 2TB drives in it.....

Image


Top
   
 Post subject: Re: LS Series 1.69 Mod 1
PostPosted: Tue May 26, 2015 9:31 pm 
Offline
Total Newbie

Joined: Wed May 20, 2015 2:51 am
Posts: 3
this place dead???


Top
   
 Post subject: Re: LS Series 1.69 Mod 1
PostPosted: Tue May 26, 2015 9:31 pm 
Offline
Total Newbie

Joined: Wed May 20, 2015 2:51 am
Posts: 3
doublepost


Last edited by Timelord83 on Tue May 26, 2015 9:32 pm, edited 1 time in total.

Top
   
 Post subject: Re: LS Series 1.69 Mod 1
PostPosted: Wed May 27, 2015 5:40 am 
Offline
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2692
Shonks Mod have no entry in the webif.
What you are looking for is:
http://www.tomatosoft.hu/gadgets/portfo ... tion-plex/


Top
   
 Post subject: Re: LS Series 1.69 Mod 1
PostPosted: Thu May 28, 2015 2:18 am 
Offline
Newbie

Joined: Sun Oct 06, 2013 1:30 pm
Posts: 33
Timelord83 wrote:
this place dead???


no GUI for the transmission

read the instructions on the first page under 1.65-MOD1b update

_________________
Buffalo LS-QVL/R5 (FW 1.69 mod 1)
Buffalo LS421DE (FW 1.31)
Buffalo LS421DE (FW 1.31)
Buffalo TeraStation TS5400D


Top
   
 Post subject: Re: LS Series 1.69 Mod 1
PostPosted: Thu May 28, 2015 4:52 am 
Offline
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2692
He is searching for this:
Image

You can not help him.


Top
   
 Post subject: Re: LS Series 1.69 Mod 1
PostPosted: Fri Oct 02, 2015 4:55 am 
Offline
Newbie

Joined: Sat Apr 13, 2013 4:26 am
Posts: 20
I just upgraded from 1.64 to the latest version, and everything seemed to work fine but with one glitch. I am using transmission and ran the telnet command to activate it, and it works fine and sees previous files. (i did not backup/restore its settings, but adding the same torrent again finds the files)


depending on whether i access via //nas or //x.x.x.x (direct IP) the shares seem to take me to a different location?

I see a /share/downloads and /share/Downloads - via IP takes me to the existing folder with all the files, //nas has a 50/50 change (it changes between reboots sometimes, even on different PC's) of taking me to a new empty folder with nothing but an "_incomplete" folder in it.


any idea what i did wrong with the upgrade and how to fix that?


Top
   
 Post subject: Re: LS Series 1.69 Mod 1
PostPosted: Thu Nov 19, 2015 11:34 pm 
Offline
Total Newbie

Joined: Thu Nov 19, 2015 11:21 pm
Posts: 1
Dear Shonk,
Thank you for your firmware! That's amazing, and very high-quality work!

I've a request. There is a newer official firmware out. v1.71 Link.
with some security patch. Could you please update your firmware?

I'm affraid that this forum will be close soon. or not? I hope, it wont. If it does, Could you please share to us a detailed tutorial what are you doing exactly?

Thank's in advance.


Top
   
 Post subject: Re: LS Series 1.69 Mod 1
PostPosted: Sat Nov 21, 2015 1:32 am 
Offline
Total Newbie

Joined: Sat Nov 21, 2015 1:13 am
Posts: 2
Hi!

Recently i got the message that i have to update my LS to 1.71, Since i have done that i'm having troubles with connecting on my TV like it supposed to do It doesnt connect at all. I have been searching for a downgrade but unfortunately I couldnt find anything.

Could some one help me out?

Kind regards,


Top
   
 Post subject: Re: LS Series 1.69 Mod 1
PostPosted: Sat Nov 21, 2015 8:56 am 
Offline
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2692
edit the lsupdater.ini with this lines:

Code:
VersionCheck = 0

[SpecialFlags]
Debug = 1


start the lsupdater.exe

klick on the golden rings top left and klick on debug

use
do not check version
and
force update


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 866 posts ]  Go to page Previous 154 55 56 57 58 Next

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited