I have LinkStation Mini 500 GB LS-WSX500LR1 (come without HDD), i want use it with new HDD ( one is 160GB and one is 500GB).
I follow instructions here http://buffalo.nas-central.org/wiki/Rev ... k_Firmware
Everything is OK until :
Do not proceed unless the TFTP server indicates successful transfer of initrd.buffalo and uImage.buffalo
as you will see in capture pic.
I wait for more than 30mn and repeat process 3 times.
The LS Mini only blinking fasted Function LED(blue) ,link LED is slowly blinking green and power LED fixed blue.
When i start NasNavi.exe it show IP and MC address of LS Mini as you will see.