Buffalo NAS-Central Forums
http://forum.buffalo.nas-central.org/

LS Mini not booting
http://forum.buffalo.nas-central.org/viewtopic.php?f=61&t=24853
Page 2 of 2

Author:  jimmygoska [ Mon Jan 16, 2012 12:42 pm ]
Post subject:  Re: LS Mini not booting

Debug buttons :

Link

LSUpdater.ini :

Code:
[Application]
Title = BUFFALO LS-WSGL/R1 Updater Ver.1.06
WaitReboot = 480
WaitFormat = 300

[Target]
ProductID = 0x00003002
Name = LS-WSGL/R1

[Flags]
VersionCheck = 0

[SpecialFlags]
Debug = 1


Am I meant to add
Code:
NoFormatting = 0
somewhere in my ini file?

Author:  oxygen8 [ Mon Jan 16, 2012 1:16 pm ]
Post subject:  Re: LS Mini not booting

[Flags]
VersionCheck = 0
NoFormatting = 0

Author:  jimmygoska [ Tue Jan 17, 2012 2:14 am ]
Post subject:  Re: LS Mini not booting

Hello again,

I've taken a screencast of what I'm doing in case I'm missing something.

Click here

Please let me know if I've made any mistakes.

Also, this is just after formatting. I'm assuming that is necessary otherwise it wouldn't boot into recovery, correct?

Cheers

Author:  oxygen8 [ Tue Jan 17, 2012 10:58 am ]
Post subject:  Re: LS Mini not booting

Connect both LS and PC to a router with DHCP!
Set your PC static to 192.168.11.1.
Transfer the Files with TFTP. Now set your PC to DHCP.
Do not use changing ip under Debugoptions.
Use nasnavigator to verify, that your PC and LS are in the same Network.
Now use lsupdater.exe.



TRY FLASHING ON WINXP

Author:  jimmygoska [ Wed Jan 25, 2012 12:33 am ]
Post subject:  Re: LS Mini not booting

Apologies for the delay in replying. Exams and coursework have been dominating my life recently (one week left!!)

Also, I currently have no WinXP discs but I'm sure I have an old MSDNAA iso lying about so I'll get that installed when I have time and flash then.

Thanks for the help so far! Much appreciated!!

James

Page 2 of 2 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/