Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Thu Jul 19, 2018 4:37 pm

All times are UTC+01:00

Post new topic  Reply to topic  [ 1 post ] 
Author Message
PostPosted: Sat Jun 21, 2014 11:23 am 
Total Newbie

Joined: Sat Jun 21, 2014 11:11 am
Posts: 1
So I've got this Linkstation Pro Duo up and running till one of the disks died. I bought 2x1.TB new drives for replacement.
At the time Linkstation already was not visible on the network, so i removed the disks, powered it up - 7 blinking red LEDs, no network activity.
Installed 2 new disks, powered up - 6 blinking LEDs. I tried turn it off, press "Reset" button and power up - 1 red LED flash, Linkstation rebooted and 2 green LEDs ar blinking (1 if no Ethernet cable attached).
This is how i tried to connect:
Crossover cable directly, static ip, tried LSUpdater, NAV Navigator, TFTP Boot different versions, tried port scan, static MAC address mapping to, basically almost anything i found on this forum. When crossed, network adapter shows X packets sent, 1 packed received, when not crossed, DHCP list on router does not show anything except my laptop.
Oh, and i used Windows 7 and Windows XP while trying all that.

Is it completely dead or i can try some other steps?

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 1 post ] 

All times are UTC+01:00

Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited