Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Sun Nov 19, 2017 4:05 am

All times are UTC+01:00




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Mon Jul 12, 2010 10:28 pm 
Offline
Total Newbie

Joined: Mon Jul 12, 2010 10:11 pm
Posts: 3
Hello,
I try to change my hard drive for a bigger one (HS-DH500GL => HS-DH1000GL )(the original disk crashed).
I try to re install the firmware via EM mode but i just can't ping the LS.

Steps I tried in order to re-start in em mode :
  • I change the sub network on my lan (192.168.11.xxx)
  • i removed the hdd
  • I start : short sequenc of beeps, the red light keeps blinking
  • I shut down (every things stop except the blinking red light)
  • I plug the hdd and restart : non stoping beeps until I clic once on the power button
  • And then looks like a christmas tree

at none of these steps a ping is ok and the firmware updater finds no LS ...

my source of information : http://buffalo.nas-central.org/index.ph ... hard_drive

Any idea ? thank you for your help !

Ben


Last edited by Benibur on Sun Jul 25, 2010 12:49 pm, edited 2 times in total.

Top
   
PostPosted: Thu Jul 22, 2010 12:44 pm 
Offline
Total Newbie

Joined: Mon Jul 12, 2010 10:11 pm
Posts: 3
Not any idea ?
It should only be the matter of detail since it is the normal way to re install the firmware in case of trouble...

If not i will have to put it in the trash whereas i am sure its working...

:?


Top
   
PostPosted: Fri Jul 23, 2010 6:52 am 
Offline
Moderator

Joined: Fri Jun 29, 2007 10:39 am
Posts: 2604
Hmm, maybe you should learn to read more carefully?
The Wiki article you linked to clearly said, that the LS-PRO (and a LS-DHXXXGL
is a PRO) update works different.
If you don't care and use the "wrong" guide to replace a disk, what did you expect?

Follow the short guide for the LS-PRO (it is at the bottom of "your" guide) and clone
the first partition.

Sorry, that I can't give you an easier advise.

_________________
Please do not use private mail (PN/M) to ask questions. Use the proper forum instead. (me)

If there is no verified backup of a dataset, the dataset, by definition, is unimportant. (c't 2012)

RAID (no matter which level) never ever substitutes a backup. (me)


Top
   
PostPosted: Sun Jul 25, 2010 12:48 pm 
Offline
Total Newbie

Joined: Mon Jul 12, 2010 10:11 pm
Posts: 3
You are completely right, I did not paid attention to the last paragraph (and as the first one is entitled "Old Generation - LS1,LS2,HG,HS" and as mine is an old HS ...)

Anyway, you are right, I had no chance to succeed.
:oops: :oops: :oops:

But, I still have a major concern : the given method consist in cloning the partition of the original disc : but what i didn't explained is that this one is dead ... so I no longer have the original partition ...

But with the correct information, I searched for more information and I found this postthat lead to this wiki page : Revive your arm9 box from scratch !

And it worked !

the only "trick" is that the installation language is in Japanese ... I then had to follow the official guide to click on the web admin interface in order to set language to "English" (on the left : second tab and then the only list box is the one (and validation is the only button on bottom)

I hope my mistake will help other stunned people :-)

Ben


Top
   
PostPosted: Sat Aug 24, 2013 11:27 am 
Offline
Total Newbie

Joined: Sat Aug 24, 2013 11:20 am
Posts: 1
I realise it's an old thread, but I need to say THANK YOU SO MUCH, Benibur!!!

Btw the link on the "revive your arm 9 box from scratch" wiki page for the TFTP program doesn't work. I found working links on some german site, though:
http://www.nas-hilfe.de/downloadbereich ... t-recovery

The hard drive on my HS-DH500GL died 3 years ago (click of death) and now thanks to this thread I managed to replace it!! So happy right now!


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited