Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Thu Apr 19, 2018 12:46 pm

All times are UTC+01:00




Post new topic  Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Sat Jan 23, 2016 11:52 pm 
Offline
Total Newbie

Joined: Sat Jan 23, 2016 11:40 pm
Posts: 1
Forgive me, I'm sure this question has been asked and answered many times, but I could not find it in the stickies or in any of the threads I pawed through.

After a decade the HDD in my LS-500gl finally crumbled; the first indicator was the LS would not boot. By cabling the HDD directly to a Linux box, copying the data with dd to a good drive, and using xfs_repair I was able to preserve most of my user data. However, I'm quite certain the boot and system partitions are also toast.

My understanding is that LSUpdater will be of no use without a booting system. Is there a way to create the needed partitions from the image files in the firmware .zip? Alternatively, is there a tarball of a bootable system someplace that I can use as a starting point? I've got a spare 500gb drive that I can use (it's a smaller form factor but I drilled the mounting plate and mounted it up).

Thanks.

-Sean


Top
   
PostPosted: Sun Jan 24, 2016 12:24 am 
Online
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2717
You need only 10MB from /dev/sda1

on Kirkwood the 2 files named
uImage.buffalo and initrd.buffalo
or the old names
$kernel and $initrd

mount the first partition as ext2 an read the directory

If this partition is ok, your linkstation will start in EM- Mode and you can flash the Firmware


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 2 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited