Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Wed Aug 15, 2018 4:55 am

All times are UTC+01:00




Post new topic  Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Mon Mar 09, 2015 2:38 pm 
Offline
Total Newbie

Joined: Mon Mar 09, 2015 2:29 pm
Posts: 1
I have tried many hours searching the net and this forum for an answer, but am not having any luck.

My LS-X1.0TL 1TB NAS died some time ago. The hard disk does not seem to be seeking correctly and makes a whirring/clicking for a few seconds then repeats over and over again. I have bought a replacement 1TB drive and gone through the TFTP process as posted in this forum (set PC IP to 192.168.11.1 etc.) and when running the TFTP Boot application I get the following:

Preparing to write TFTP configuration settings.
TFTP Configuration settings have been written.
TFTP Server Multithreaded Version 1.4 Windows Built 1.400


Starting TFTP...
alias / is mapped to D:\userdata\My Documents\IT\Buffalo\TFTP_
KirkwoodVariants\
listening On: 10.150.45.167:69
listening On: 192.168.1.91:69
listening On: 192.168.11.1:69
listening On: 127.0.0.1:69
permitted clients: all
server port range: all
max blksize: 65464
defult blksize: 512
default interval: 3
overwrite existing files: No
thread pool size: 1

accepting requests..
Client 192.168.11.150:1476 D:\userdata\jbarrat1\My Documents\Personal\IT\Buffalo
\TFTP_KirkwoodVariants\uImage.buffalo, 5337 Blocks Served
Client 192.168.11.150:3762 D:\userdata\jbarrat1\My Documents\Personal\IT\Buffalo
\TFTP_KirkwoodVariants\initrd.buffalo, 21348 Blocks Served
Client 192.168.11.150:1476 D:\userdata\jbarrat1\My Documents\Personal\IT\Buffalo
\TFTP_KirkwoodVariants\uImage.buffalo, 5337 Blocks Served
Client 192.168.11.150:2995 D:\userdata\jbarrat1\My Documents\Personal\IT\Buffalo
\TFTP_KirkwoodVariants\initrd.buffalo, 21348 Blocks Served

The blue light on the NAS flashes for a while then goes out for while (you can hear the drive running up each time the light flashes), this just keeps repeating ad-infinitum with the two lines of text repeating after each run-up.

I am wondering if it is the control board on the NAS that has given up or am I doing something wrong?

Any help here would be gratefully received as I am at my wits end!! :cry: :cry:


Top
   
PostPosted: Wed Apr 29, 2015 8:49 pm 
Offline
Total Newbie

Joined: Fri Apr 03, 2015 9:37 am
Posts: 2
I have the same type of problem with this NAS

Think mine is down to the HDD not being compatible.

Searching for the list again of compatible HDD for this


Top
   
PostPosted: Wed Apr 29, 2015 9:22 pm 
Offline
Moderator

Joined: Mon Apr 26, 2010 10:24 am
Posts: 2734
Its a Kirkwood- NAS
Any HDD can use.

But drives greater then 2TB have to set to GPT and not MBR.
You can use windows to switch.

and read
http://buffalo.nas-central.org/wiki/Res ... om_scratch


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 3 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: Google [Bot] and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited