Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Sat Jan 20, 2018 3:51 pm

All times are UTC+01:00




Post new topic  Reply to topic  [ 3 posts ] 
Author Message
 Post subject: LS2 file system layout?
PostPosted: Mon Feb 14, 2011 9:49 am 
Offline
Newbie

Joined: Sat Feb 12, 2011 3:36 pm
Posts: 5
Does anyone know of any documentation on the LS2 file system layout?
df shows rootfs and /dev/root as /, and then /dev/ram0 and /dev/hda3
I can't find any device called rootfs (which, reasonably enough seems
to hold the root file system), and I'd expect to find /dev/hda1 around
somewhere, since that's where the root filesystem is actually stored.

Before messing around any further I'd like to know what I'm messing
with - has this been documented anywhere?

Thanks - Will


Top
   
PostPosted: Tue Feb 15, 2011 12:35 am 
Offline
Newbie

Joined: Sun Nov 20, 2005 7:40 pm
Posts: 51
I've found an old posting here in the forum with the output of mount. So if you still have the stock firmware, that should be your layout, too ...well, except of sda1 of course. And yes, /dev/hda1 is / (don't know why it's called rootfs ...maybe something specific to the mount command being used ...might also be caused by busybox). Then /dev/hda2 should be swap and /dev/hda3 the partition with all the data.


Top
   
PostPosted: Wed Feb 16, 2011 9:18 am 
Offline
Newbie

Joined: Sat Feb 12, 2011 3:36 pm
Posts: 5
Thanks - the naming still baffles me, but at least it was present
in the original.

Will


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 3 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited