Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Thu Nov 23, 2017 6:46 am

All times are UTC+01:00




Post new topic  Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Sun Aug 29, 2010 5:28 pm 
Offline
Total Newbie

Joined: Sun Aug 29, 2010 5:19 pm
Posts: 3
hi there ...

probably this case is handled here somewhere ... so pls don't kick me, if i'm to blind to find it ...

i got a ls2 running latest freelink. i want to install telnet and got the following output:

root@LINKSTATION:/mnt/hda/dd# apt-get install telnetd
Reading Package Lists... Done
Building Dependency Tree... Done
The following extra packages will be installed:
libc6 lsb-base netbase openbsd-inetd update-inetd
Suggested packages:
locales glibc-doc
The following packages will be REMOVED:
netkit-inetd
The following NEW packages will be installed:
lsb-base openbsd-inetd update-inetd
The following packages will be upgraded:
libc6 netbase telnetd
3 upgraded, 3 newly installed, 1 to remove and 112 not upgraded.
1 not fully installed or removed.
Need to get 137kB/5007kB of archives.
After unpacking 3760kB disk space will be freed.
Do you want to continue? [Y/n] y
Get:1 http://mirrors.kernel.org stable/main lsb-base 3.2-20 [19.5kB]
Get:2 http://mirrors.kernel.org stable/main netbase 4.34 [18.5kB]
Get:3 http://mirrors.kernel.org stable/main update-inetd 4.31 [16.9kB]
Get:4 http://mirrors.kernel.org stable/main openbsd-inetd 0.20080125-2 [35.7kB]
Get:5 http://mirrors.kernel.org stable/main telnetd 0.17-36 [46.0kB]
Fetched 137kB in 2s (47.4kB/s)
Preconfiguring packages ...
Selecting previously deselected package lsb-base.
(Reading database ... 9070 files and directories currently installed.)
Unpacking lsb-base (from .../lsb-base_3.2-20_all.deb) ...
Preparing to replace netbase 4.21 (using .../archives/netbase_4.34_all.deb) ...
Unpacking replacement netbase ...
(Reading database ... 9073 files and directories currently installed.)
Removing netkit-inetd ...
Stopping internet superserver: inetd.
(Reading database ... 9064 files and directories currently installed.)
Preparing to replace libc6 2.3.2.ds1-22sarge3 (using .../libc6_2.7-18lenny4_mipsel.deb) ...
Checking for services that may need to be restarted...
Checking init scripts...
readlink: invalid option -- e
Try `readlink --help' for more information.
readlink: invalid option -- e
Try `readlink --help' for more information.
readlink: invalid option -- e
Try `readlink --help' for more information.
readlink: invalid option -- e
Try `readlink --help' for more information.
readlink: invalid option -- e
Try `readlink --help' for more information.
readlink: invalid option -- e
Try `readlink --help' for more information.
readlink: invalid option -- e
Try `readlink --help' for more information.
readlink: invalid option -- e
Try `readlink --help' for more information.
WARNING: POSIX threads library NPTL requires kernel version
2.6.8 or later. If you use a kernel 2.4, please upgrade it
before installing glibc.

The installation of a 2.6 kernel _could_ ask you to install a new libc
first, this is NOT a bug, and should *NOT* be reported. In that case,
please add etch sources to your /etc/apt/sources.list and run:
apt-get install -t etch linux-image-2.6
Then reboot into this new kernel, and proceed with your upgrade
dpkg: error processing /var/cache/apt/archives/libc6_2.7-18lenny4_mipsel.deb (--unpack):
subprocess pre-installation script returned error exit status 1
Errors were encountered while processing:
/var/cache/apt/archives/libc6_2.7-18lenny4_mipsel.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)


how does the kernel-update work ??? is there any tut for a noob to get it working ??? i tried it as reported: "apt-get install -t etch linux-image-2.6" with the sources.list edited. but that doesn't seem to work.

thank you in advance ...

greetz, sLOID.


Top
   
PostPosted: Sun Aug 29, 2010 9:57 pm 
Offline
Betatester
User avatar

Joined: Thu Jul 14, 2005 4:38 pm
Posts: 941
Location: England
Off the top of my head you can change 'stable' in /etc/apt/sources.list to etch (or whatever name was before current stable (Lenny)) and that would mean you'd stay on that version (providing that doesn't 'downgade you' - meaning you haven't run upgrade aleady)). Because it states you need a 2.6 kernel, you'd have to install uboot etc...

Why do you need telnet? You could probably grab the .deb of it and use dpkg to install


Top
   
PostPosted: Sun Aug 29, 2010 10:12 pm 
Offline
Total Newbie

Joined: Sun Aug 29, 2010 5:19 pm
Posts: 3
hi Bauldrick ...

thx for your fast answere ...

Quote:
Why do you need telnet? You could probably grab the .deb of it and use dpkg to install


oh, i can do that ??? fine ... will test it right now ...

just wanna try some nasty stuff with this good old piece of hardware ... telnet is the first step ... i have a bunch of computers here, where telnet-clients allready installed ... there should be no need for using putty ... that's all ...

will report ... after testing the dpkg-stuff ...

thx.


Top
   
PostPosted: Sun Aug 29, 2010 10:21 pm 
Offline
Betatester
User avatar

Joined: Thu Jul 14, 2005 4:38 pm
Posts: 941
Location: England
But it looks like you're in the middle of an upgrade to Lenny (stable)? Is that correct?

If it is you're going to need to get uboot in order to load a 2.6 kernel from /boot on hdd, otherwise you'll probably be stuck in a 'inbetween upgrade' situation..

In all honesty, if you want to go forward then having uboot is the best option. There's plenty of info about it and how to install, let us know how it goes, if you need any more info we can point you in the right direction.


Top
   
PostPosted: Sun Aug 29, 2010 10:32 pm 
Offline
Total Newbie

Joined: Sun Aug 29, 2010 5:19 pm
Posts: 3
yeah, that's right ... i just put it in em-mode and made it original ... :up: ... just to be sure to start from the beginning :geek:

just read on here: http://www.linuxnotincluded.org.uk/ on that uboot thing ... hell ... even understood less than 30% ... don't know if it's worth getting my ls2 bricked ... im not very familiar with linux ... and the development system is something for pro-users i think ... it's no stuff like: 1.) switch your computer on ... 2.) check if your mouse is connected ... 3.) ...

will try the .deb stuff ... when i'll ever find a source to download it for debian 3.1 :roll:

thank you for your support ...


Top
   
PostPosted: Sun Aug 29, 2010 11:11 pm 
Offline
Betatester
User avatar

Joined: Thu Jul 14, 2005 4:38 pm
Posts: 941
Location: England
It is a bit much I know, there's always this > Impatiant uboot install < atleast read that 4-5 times, try and understand what happens and if you're willing to follow you'll be better off (in my opinion), but it's up to you.

Have you looked in LS2 download page? theres a telnet binary, don't know if that'd help


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
cron
Powered by phpBB® Forum Software © phpBB Limited