Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Thu Nov 23, 2017 6:45 am

All times are UTC+01:00




Post new topic  Reply to topic  [ 48 posts ]  Go to page Previous 1 2 3 4 Next
Author Message
PostPosted: Fri Aug 28, 2009 5:21 pm 
Offline
Site Admin
User avatar

Joined: Mon Aug 28, 2006 1:15 am
Posts: 2606
well, step #4 ...
4. Set the date in foonas-em
Code:
date MMDDhhmmyyyy

(for me in UTC time I do this)
Code:
date 082817332009


Hint: Always set your date when booting into another kernel (ie., into a kernel that uses a different rtc driver), otherwise, you will see some strange dates.

_________________
LS1 (foonas, nfs, Tranmission & p910nd print server, Firefly for my Roku)
LS-HG500 (Lenny)
Various LS-Pros v1,v2 (unbricked w/ serial & jtag)
KuroPro, LS2 & KuroHG (foonas)
Working on davysweather.dyndns.org lately...

=> wooohooo!
wooohooo!
Unknown command 'wooohooo!' - try 'help'


Top
   
PostPosted: Fri Aug 28, 2009 5:55 pm 
Offline
Newbie

Joined: Thu Feb 14, 2008 5:28 am
Posts: 45
Hi davy_gravy,

I tried to follow the installation guide again.. It still doesn't work....
Code:
   ______ _____ _____ __   __  _____  ______
  |   ___|     |     |   \|  |/  _  \|   ___|
 _|   ___|  -  |  -  |       |   _   |\   \
| |__|   |_____|_____|__|\___|__| |__|_\   \
|___________________________________________|

foonas-em for lsmipsel - http://foonas.org

lsmipsel login: root
Password:
foonas-em$ date 092912372009
Tue Sep 29 12:37:00 UTC 2009
foonas-em$ fdisk /dev/hda

The number of cylinders for this disk is set to 19457.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): p

Disk /dev/hda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks  Id System
/dev/hda1               1         609     4891761  83 Linux
/dev/hda2             610         672      506047+ 83 Linux
/dev/hda3             673       19457   150890512+ 83 Linux

Command (m for help): q

foonas-em$ tune2fs /dev/hda1 -i 0 -c 0
tune2fs 1.41.3 (12-Oct-2008)
Setting maximal mount count to -1
Setting interval between checks to 0 seconds
foonas-em$ tune2fs /dev/hda3 -i 0 -c 0
tune2fs 1.41.3 (12-Oct-2008)
Setting maximal mount count to -1
Setting interval between checks to 0 seconds
foonas-em$ mount -t ext3 /dev/hda1 /mnt
foonas-em$ cd /mnt
foonas-em$ ls
bin                    lost+found             sbin
boot                   lsmipsel-lenny-v4.tar  selinux
boot-em                media                  srv
dev                    mnt                    sys
etc                    opt                    tmp
home                   proc                   usr
lib                    root                   var
foonas-em$ cd /
foonas-em$ umount /dev/hda1
foonas-em$ fsck.ext3 /dev/hda1
e2fsck 1.41.3 (12-Oct-2008)
/dev/hda1: clean, 10698/305824 files, 150999/1222940 blocks
foonas-em$ reboot
stopped /usr/sbin/httpd (pid 689)
stopped /usr/sbin/bftpd (pid 686)


..


Top
   
PostPosted: Fri Aug 28, 2009 6:04 pm 
Offline
Site Admin
User avatar

Joined: Mon Aug 28, 2006 1:15 am
Posts: 2606
well, all I can suggest is to try these commands from uboot
-after running fsck on hda1 in case it didn't boot the previous time)

Code:
ide reset
ext2ls 0:1  /
ext2load ide 0:1 82000000 /boot/vmlinuz-2.6.30.5
setenv bootargs  'root=/dev/sda1 rw netconsole=6666@192.168.11.150/,@192.168.11.149/'
bootm



Also, have you __ever__ been able to see the files listed from inside your uboot env? (with ext2ls)

If not there may be something different with your hard drive. Is your hard drive a regular IDE drive? or are you using a SATA drive w/ an adapter. I think that if
Code:
ext2ls 0:1  / 
shows nothing, there may be a significant problem. If that command shows nothing, then your partition is not being read properly by uboot.

What about
Code:
ext2ls 1:1  / 

_________________
LS1 (foonas, nfs, Tranmission & p910nd print server, Firefly for my Roku)
LS-HG500 (Lenny)
Various LS-Pros v1,v2 (unbricked w/ serial & jtag)
KuroPro, LS2 & KuroHG (foonas)
Working on davysweather.dyndns.org lately...

=> wooohooo!
wooohooo!
Unknown command 'wooohooo!' - try 'help'


Top
   
PostPosted: Fri Aug 28, 2009 6:28 pm 
Offline
Site Admin
User avatar

Joined: Mon Aug 28, 2006 1:15 am
Posts: 2606
Oh, by the way, what sort of network scanner are you using to look for your LS2, and does it show any ports open?

Could you post the output of the of your network scanner?

Does your box make any hdd sound? If so, what kinds and when?

_________________
LS1 (foonas, nfs, Tranmission & p910nd print server, Firefly for my Roku)
LS-HG500 (Lenny)
Various LS-Pros v1,v2 (unbricked w/ serial & jtag)
KuroPro, LS2 & KuroHG (foonas)
Working on davysweather.dyndns.org lately...

=> wooohooo!
wooohooo!
Unknown command 'wooohooo!' - try 'help'


Top
   
PostPosted: Fri Aug 28, 2009 6:54 pm 
Offline
Newbie

Joined: Thu Feb 14, 2008 5:28 am
Posts: 45
Hi davy_gravy,

Quote:
well, all I can suggest is to try these commands from uboot
-after running fsck on hda1 in case it didn't boot the previous time)

Code:
ide reset
ext2ls 0:1 /
ext2load ide 0:1 82000000 /boot/vmlinuz-2.6.30.5
setenv bootargs 'root=/dev/sda1 rw netconsole=6666@192.168.11.150/,@192.168.11.149/'
bootm

The result is negative.... The U-Boot still can't find the file on the disk..
=============================================================================
Quote:
Also, have you __ever__ been able to see the files listed from inside your uboot env? (with ext2ls)

I think I didn't see the list with ext2ls.. actually you just told me this command... But I am sure I can start from U-Boot once before... please see here:
Quote:
zlyzwy wrote:
It's just strange.... last time I hit enter after I type 's'. It doesn't work at all... this time it works here..

what's the purpose of
"12. To use vmlinux-2.6.22.gz, rename /boot/vmlinuz to something else and
create a symbolic link:
# ln -s /boot/vmlinux-2.6.22.gz /boot/vmlinuz
Boot normally with U-Boot.
"

after I did this,,, I can't boot again... I think I have installed U-boot but I shouldn't change the name of vmlinuz I think...

Code:
Loading 0:1:boot/vmlinuz

1789270 bytes read
## Booting image at 82000000 ...
Found gzip-ed image at 0x82000000. Uncompressing ...done
Loading .text @ 0x80100000 (2841024 bytes)
Loading __ex_table @ 0x803b59c0 (6584 bytes)
Loading .rodata @ 0x803b8000 (223304 bytes)
Loading .pci_fixup @ 0x803ee848 (1320 bytes)
Loading __ksymtab @ 0x803eed70 (18448 bytes)
Loading __ksymtab_gpl @ 0x803f3580 (4664 bytes)
Loading __ksymtab_gpl_future @ 0x803f47b8 (24 bytes)
Loading __kcrctab @ 0x803f47d0 (9224 bytes)
Loading __kcrctab_gpl @ 0x803f6bd8 (2332 bytes)
Loading __kcrctab_gpl_future @ 0x803f74f4 (12 bytes)
Loading __ksymtab_strings @ 0x803f7500 (53616 bytes)
Loading __param @ 0x80404670 (860 bytes)
Loading .data @ 0x80406000 (123552 bytes)
Loading .data.cacheline_aligned @ 0x80425000 (192 bytes)
Loading .init.text @ 0x80426000 (141940 bytes)
Loading .init.data @ 0x80448a78 (12492 bytes)
Loading .init.setup @ 0x8044bb50 (744 bytes)
Loading .initcall.init @ 0x8044be38 (516 bytes)
Loading .con_initcall.init @ 0x8044c03c (8 bytes)
Loading .exit.text @ 0x8044c044 (3164 bytes)
Loading .init.ramfs @ 0x8044d000 (134 bytes)
Clearing .bss @ 0x8044e000 (119584 bytes)

Starting kernel @ 0x80426000...


I can't ping or connect to LS anymore...

Thanks for your time!



I found one command to fix this.

setenv <name> <value>

Code:
=> setenv hdfile boot/vmlinuz_backup
setenv hdfile boot/vmlinuz_backup
=> boot


Now I can used the old system again... :biglol:


vmlinuz_backup is the origianl vmlinuz with U-Boot, when I tried to do the next step
Quote:
12. To use vmlinux-2.6.22.gz, rename /boot/vmlinuz to something else and
create a symbolic link:

# ln -s /boot/vmlinux-2.6.22.gz /boot/vmlinuz

Boot normally with U-Boot.

I can't continue because I can't connect to LS with the vmlinux-2.6.22.gz kernel...

=====================================================================
I am now using a IDE 160GB hard disk.. I was preparing when everything got done, I clone all the things to the new driver...
the hard disk information:
Quote:
=> ide reset
ide reset

Reset IDE: Bus 0: OK Bus 1: OK
Device 0: Model: WDC WD1600AAJB-00WRA0 Firm: 58.01H58 Ser#: W -DCWSAC2501311
Type: Hard Disk
Supports 48-bit addressing
Capacity: 152627.8 MB = 149.0 GB (312581808 x 512)


the result of command
Code:
=> ext2ls ide 0:1 /
ext2ls ide 0:1 /
=> ext2ls ide 1:1 /
ext2ls ide 1:1 /

** Block device ide 1 not supported


======================================================================
Quote:
Oh, by the way, what sort of network scanner are you using to look for your LS2, and does it show any ports open?

Could you post the output of the of your network scanner?

Does your box make any hdd sound? If so, what kinds and when?


I am not using the scanner tools now,, I just ping the fixed IP(192.168.11.150). Meanwhile, I will try ssh/telnet to LS...

When I untar the file to disk, it will have some sound from hard disk,,,of cours i think it should have this..
When I reboot the LS, the diag(topside) light will blink for around 3 mins... this is the most strange thing here... I guess it's looking for /boot folder. but it finally didn't find it and it reboot with U-boot... but why? :?:
I tried to power off the LS without typing reboot, it still have the same issue....

Thanks so much for your help! I have to go to bed now... Thanks again!


Top
   
PostPosted: Fri Aug 28, 2009 6:59 pm 
Offline
Newbie

Joined: Thu Feb 14, 2008 5:28 am
Posts: 45
Interesting thing,, when I press on the power button, diag(topside) light dimming. . .


Top
   
PostPosted: Fri Aug 28, 2009 7:52 pm 
Offline
Site Admin
User avatar

Joined: Mon Aug 28, 2006 1:15 am
Posts: 2606
I found the problem... at least a problem
... see the new step #6 in the HowTo for Lenny directions...

in the newer ext2fs rev 1 (and in newer versions of ext2fsprogs), the inode size is now variable (not fixed at 128 as it was in ext2fs rev0)

the
Code:
-I 128
option for mkfs.ext3 makes it now readable for uboot.

EDIT : and a type from before

Code:
ide reset
ext2ls ide 0:1 /
ext2load ide 0:1 82000000 /boot/vmlinuz-2.6.30.5
setenv bootargs 'root=/dev/sda1 rw netconsole=6666@192.168.11.150/,@192.168.11.149/'
bootm


I just went through the entire procedure on the HOWTO and it does work...

_________________
LS1 (foonas, nfs, Tranmission & p910nd print server, Firefly for my Roku)
LS-HG500 (Lenny)
Various LS-Pros v1,v2 (unbricked w/ serial & jtag)
KuroPro, LS2 & KuroHG (foonas)
Working on davysweather.dyndns.org lately...

=> wooohooo!
wooohooo!
Unknown command 'wooohooo!' - try 'help'


Top
   
PostPosted: Sat Aug 29, 2009 2:52 am 
Offline
Newbie

Joined: Thu Feb 14, 2008 5:28 am
Posts: 45
Hi davy_gravy!

You are right! the problem is due to the option
Code:
-I 128
.

now I list the folder in U-boot
Code:
Boot in 09 seconds ('s' to stop)...s
Boot in 08 seconds ('s' to stop)...
=>

=> help
help
?       - alias for 'help'
base    - print or set address offset
bdinfo  - print Board Info structure
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootelf - Boot from an ELF image in memory
bootm   - boot application image from memory
bootp   - boot image via network using BootP/TFTP protocol
bootvx  - Boot vxWorks from an ELF image
cmp     - memory compare
coninfo - print console devices and information
cp      - memory copy
crc32   - checksum calculation
dhcp    - invoke DHCP client to obtain IP/boot params
diskboot- boot from IDE device
echo    - echo args to console
erase   - erase FLASH memory
ext2load- load binary file from a Ext2 filesystem
ext2ls  - list files in a directory (default /)
flinfo  - print FLASH memory information
go      - start application at address 'addr'
help    - print online help
ide     - IDE sub-system
loadb   - load binary file over serial line (kermit mode)
loads   - load S-Record file over serial line
loop    - infinite loop on address range
md      - memory display
mm      - memory modify (auto-incrementing)
mtest   - simple RAM test
mw      - memory write (fill)
nfs     - boot image via network using NFS protocol
nm      - memory modify (constant address)
pci     - list and access PCI Configuration Space
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
protect - enable or disable FLASH write protection
rarpboot- boot image via network using RARP/TFTP protocol
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv  - set environment variables
tftpboot- boot image via network using TFTP protocol
version - print monitor version
=> ext2ls ide 0:1 /
ext2ls ide 0:1 /
<DIR>       4096 .
<DIR>       4096 ..
<DIR>      16384 lost+found
       186664960 lsmipsel-lenny-v4.tar
<DIR>       4096 sys
<DIR>       4096 media
<DIR>       4096 dev
<DIR>       4096 lib
<DIR>       4096 var
<DIR>       4096 opt
<DIR>       4096 boot-em
<DIR>       4096 proc
<DIR>       4096 home
<DIR>       4096 sbin
<DIR>       4096 tmp
<DIR>       4096 bin
<DIR>       4096 mnt
<DIR>       4096 srv
<DIR>       4096 root
<DIR>       4096 boot
<DIR>       4096 usr
<DIR>       4096 selinux
<DIR>       4096 etc
=> set bootargs 'root=/dev/sda1 rw netconsole=6666@192.168.11.150/,@192.168.11.149/'
set bootargs 'root=/dev/sda1 rw netconsole=6666@192.168.11.150/,@192.168.11.149/'
=> set hdfile boot/vmlinuz
set hdfile boot/vmlinuz
=> save
save
Saving Environment to Flash...
Un-Protected 1 sectors
Erasing Flash...
Flash erase: first = 10 @ 0xbfc30000
             last  = 10 @ 0xbfc30000
Flash erase: Done
Erased 1 sectors
Writing to Flash... done
Protected 1 sectors
=> boot
boot
Loading 0:1:boot/vmlinuz

5841969 bytes read
## Booting image at 82000000 ...
Loading .text @ 0x80002000 (3678232 bytes)
Loading __ex_table @ 0x80384020 (6888 bytes)
Loading .notes @ 0x80385b08 (36 bytes)
Loading .rodata @ 0x80386000 (344160 bytes)
Loading .init.rodata @ 0x803da060 (256 bytes)
Loading .pci_fixup @ 0x803da160 (1736 bytes)
Loading __ksymtab @ 0x803da828 (18920 bytes)
Loading __ksymtab_gpl @ 0x803df210 (9248 bytes)
Loading __kcrctab @ 0x803e1630 (9460 bytes)
Loading __kcrctab_gpl @ 0x803e3b24 (4624 bytes)
Loading __ksymtab_strings @ 0x803e4d34 (61219 bytes)
Loading __param @ 0x803f3c58 (5032 bytes)
Loading .data @ 0x803f6000 (302976 bytes)
Loading .data.cacheline_aligned @ 0x80440000 (1536 bytes)
Loading .init.text @ 0x80441000 (143776 bytes)
Loading .init.data @ 0x804641a0 (21880 bytes)
Loading .init.setup @ 0x80469720 (864 bytes)
Loading .initcall.init @ 0x80469a80 (676 bytes)
Loading .con_initcall.init @ 0x80469d24 (8 bytes)
Loading .exit.text @ 0x80469d2c (3980 bytes)
Loading .init.ramfs @ 0x8046b000 (512 bytes)
Clearing .bss @ 0x8046c000 (166336 bytes)

Starting kernel @ 0x80006490...


But there is a new question , after the kenerl boots, I can't connect to LS. I used Free IPscan to scan all the IP address. it doesn't find any host.
I also check with the network settings, there is nothing special, all the IP address is default.

I think we are making progress! :up:

Thanks!

EDIT: Haha!!!It's working!!! I found LS with IP(192.168.11.150)... :up:
Code:
./etc/init.d/mountkernfs.sh
./etc/init.d/mtab.sh
./etc/init.d/stop-bootlogd
./etc/init.d/single
./etc/init.d/umountfs
./etc/init.d/hwclockfirst.sh
./etc/init.d/hwclock.sh
./etc/init.d/reboot
./etc/init.d/umountroot
./etc/init.d/rcS
./etc/init.d/sendsigs
./etc/init.d/mountdevsubfs.sh
./etc/init.d/udev
./etc/init.d/bootlogd
./etc/init.d/udev-mtab
./etc/init.d/checkroot.sh
./etc/init.d/halt
./etc/init.d/avr-evtd
./etc/init.d/x11-common
./etc/init.d/mountnfs.sh
./etc/init.d/stop-bootlogd-single
./etc/init.d/mountnfs-bootclean.sh
./etc/init.d/networking
./etc/init.d/bootmisc.sh
./etc/init.d/mountall.sh
./etc/init.d/killprocs
./etc/init.d/umountnfs.sh
./etc/init.d/procps
./etc/init.d/rc.local
./etc/init.d/cron
./etc/init.d/checkfs.sh
./etc/init.d/mountoverflowtmp
./etc/init.d/ifupdown
./etc/init.d/rc
./etc/init.d/ssh
./etc/init.d/hostname.sh
./etc/init.d/rsyslog
./etc/init.d/skeleton
./etc/init.d/rmnologin
./etc/init.d/module-init-tools
./etc/init.d/mountall-bootclean.sh
./etc/init.d/README
./etc/init.d/urandom
./etc/init.d/glibc.sh
./etc/init.d/ifupdown-clean
./etc/motd.tail
./etc/rc.local
./etc/deluser.conf
./etc/profile
./etc/modprobe.d/
./etc/modprobe.d/bnep.conf
./etc/modprobe.d/pnp-hotplug
./etc/modprobe.d/rfcomm.conf
./etc/modprobe.d/sco.conf
./etc/modprobe.d/arch/
./etc/modprobe.d/arch/mips
./etc/modprobe.d/l2cap.conf
./etc/modprobe.d/arch-aliases
./etc/modprobe.d/af_packet.conf
./etc/modprobe.d/display_class
./etc/modprobe.d/aliases
./etc/modprobe.d/blacklist
./etc/rsyslog.conf
./etc/rsyslog.d/
./etc/scsi_id.config
./etc/lsb-base/
./etc/hostname
./etc/protocols
./etc/vim/
./etc/vim/vimrc
./etc/vim/vimrc.tiny
./etc/rc1.d/
./etc/rc1.d/S90single
./etc/rc1.d/S30killprocs
./etc/rc1.d/K90rsyslog
./etc/rc1.d/K84ssh
./etc/rc1.d/README
./etc/rc1.d/K11cron
./etc/group-
./etc/iproute2/
./etc/iproute2/rt_protos
./etc/iproute2/ematch_map
./etc/iproute2/rt_scopes
./etc/iproute2/rt_dsfield
./etc/iproute2/rt_tables
./etc/iproute2/rt_realms
./etc/gshadow
./etc/ld.so.cache
./etc/mtab
./etc/avr_evtd/
./etc/avr_evtd/recovery.tar
./etc/avr_evtd/emergency_eth0
./etc/avr_evtd/EventScript
./etc/rc6.d/
./etc/rc6.d/K25hwclock.sh
./etc/rc6.d/S36ifupdown
./etc/rc6.d/S30urandom
./etc/rc6.d/K63mountoverflowtmp
./etc/rc6.d/K90rsyslog
./etc/rc6.d/S31umountnfs.sh
./etc/rc6.d/S40umountfs
./etc/rc6.d/S60umountroot
./etc/rc6.d/K95avr-evtd
./etc/rc6.d/S20sendsigs
./etc/rc6.d/S90reboot
./etc/rc6.d/S35networking
./etc/rc6.d/README
./etc/terminfo/
./etc/terminfo/README
./etc/host.conf
./etc/cron.d/
./etc/cron.d/.placeholder
./etc/environment
./etc/groff/
./etc/groff/mdoc.local
./etc/groff/man.local
./etc/hosts.allow
./etc/ld.so.conf.d/
./etc/ld.so.conf.d/mipsel-linux-gnu.conf
./etc/ld.so.conf.d/libc.conf
./etc/motd
./etc/cron.weekly/
./etc/cron.weekly/man-db
./etc/cron.weekly/.placeholder
./etc/cron.hourly/
./etc/cron.hourly/.placeholder
./etc/X11/
./etc/X11/Xresources/
./etc/X11/Xresources/x11-common
./etc/X11/Xsession.options
./etc/X11/rgb.txt
./etc/X11/Xsession.d/
./etc/X11/Xsession.d/30x11-common_xresources
./etc/X11/Xsession.d/40x11-common_xsessionrc
./etc/X11/Xsession.d/50x11-common_determine-startup
./etc/X11/Xsession.d/20x11-common_process-args
./etc/X11/Xsession.d/99x11-common_start
./etc/X11/Xsession.d/90x11-common_ssh-agent
./etc/X11/Xsession
./etc/X11/Xwrapper.config
./etc/securetty
./etc/ssh/
./etc/ssh/ssh_config
./etc/ssh/moduli
./etc/ssh/ssh_host_dsa_key.pub
./etc/ssh/sshd_config
./etc/ssh/ssh_host_rsa_key.pub
./etc/ssh/ssh_host_rsa_key
./etc/ssh/ssh_host_dsa_key
./etc/rcS.d/
./etc/rcS.d/S18ifupdown-clean
./etc/rcS.d/S46mountnfs-bootclean.sh
./etc/rcS.d/S02hostname.sh
./etc/rcS.d/S30checkfs.sh
./etc/rcS.d/S11hwclock.sh
./etc/rcS.d/S39ifupdown
./etc/rcS.d/S02mountkernfs.sh
./etc/rcS.d/S35mountall.sh
./etc/rcS.d/S08hwclockfirst.sh
./etc/rcS.d/S55urandom
./etc/rcS.d/S55bootmisc.sh
./etc/rcS.d/S10checkroot.sh
./etc/rcS.d/S30procps
./etc/rcS.d/S01glibc.sh
./etc/rcS.d/S05bootlogd
./etc/rcS.d/S45mountnfs.sh
./etc/rcS.d/S36udev-mtab
./etc/rcS.d/S20module-init-tools
./etc/rcS.d/S03udev
./etc/rcS.d/S99stop-bootlogd-single
./etc/rcS.d/S40networking
./etc/rcS.d/S36mountall-bootclean.sh
./etc/rcS.d/S37mountoverflowtmp
./etc/rcS.d/S12mtab.sh
./etc/rcS.d/README
./etc/rcS.d/S04mountdevsubfs.sh
./etc/rcS.d/S70x11-common
./etc/nsswitch.conf
./etc/gshadow-
./etc/nanorc
./etc/fstab.ide
./etc/shadow
./etc/services
./etc/sysctl.conf
./etc/hosts.deny
./etc/hosts
./etc/resolv.conf
./etc/dpkg/
./etc/dpkg/origins/
./etc/dpkg/origins/debian
./etc/dpkg/dpkg.cfg
./etc/security/
./etc/security/limits.conf
./etc/security/access.conf
./etc/security/opasswd
./etc/security/pam_env.conf
./etc/security/group.conf
./etc/security/sepermit.conf
./etc/security/namespace.init
./etc/security/namespace.conf
./etc/security/time.conf
./etc/logrotate.d/
./etc/logrotate.d/apt
./etc/logrotate.d/aptitude
./etc/logrotate.d/rsyslog
./etc/logrotate.d/dpkg
./etc/ld.so.conf
./etc/cron.daily/
./etc/cron.daily/logrotate
./etc/cron.daily/apt
./etc/cron.daily/aptitude
./etc/cron.daily/bsdmainutils
./etc/cron.daily/man-db
./etc/cron.daily/.placeholder
./etc/cron.daily/standard
./etc/pam.d/
./etc/pam.d/login
./etc/pam.d/common-session
./etc/pam.d/passwd
./etc/pam.d/chsh
./etc/pam.d/su
./etc/pam.d/other
./etc/pam.d/chfn
./etc/pam.d/cron
./etc/pam.d/common-auth
./etc/pam.d/common-account
./etc/pam.d/sshd
./etc/pam.d/common-password
./etc/shadow-
foonas-em$ cat /mnt/etc/network/interfaces
# Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or
# /usr/share/doc/ifupdown/examples for more information.
auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
        address 192.168.11.150
        netmask 255.255.255.0
        broadcast 192.168.11.255
        gateway 192.168.11.1
        network 192.168.11.0
foonas-em$ ca /
-sh: ca: not found
foonas-em$ cd /
foonas-em$ umount /dev/hda1
umount: can't umount /mnt: Device or resource busy
foonas-em$ umount /dev/hda1
foonas-em$ umount /dev/hda1
umount: can't umount /mnt: Device or resource busy
foonas-em$ umount /dev/hda1
umount: can't umount /mnt: Device or resource busy
foonas-em$ umount /dev/hda1
umount: can't umount /mnt: Device or resource busy
foonas-em$ umount /dev/hda1
umount: can't umount /mnt: Device or resource busy
foonas-em$ fuser -help
-sh: fuser: not found
foonas-em$ fuser -help
-sh: fuser: not found
foonas-em$ top

Mem: 59484K used, 2156K free, 0K shrd, 3420K buff, 47332K cached
Load average: 0.01 0.29 0.29
  PID  PPID USER     STAT   VSZ %MEM COMMAND
  679     1 root     S     2572   4% /usr/sbin/mDNSResponder
  680   679 root     S     2572   4% /usr/sbin/mDNSResponder
  682   680 root     S     2572   4% /usr/sbin/mDNSResponder
  601     1 root     S     1420   2% /sbin/syslogd -C
  683     1 root     S     1412   2% /usr/sbin/telnetd
  697   683 root     S     1412   2% -sh
  711   683 root     S     1412   2% -sh
    1     0 root     S     1408   2% init 
  723   711 root     R     1404   2% top
  689     1 root     S     1404   2% /usr/sbin/httpd httpd -c /etc/httpd.webif -
  686     1 root     S      868   1% /usr/sbin/bftpd -d
  692     1 root     S      656   1% avr_evtd
    3     2 root     SWN      0   0% [ksoftirqd/0]
    4     2 root     SW<      0   0% [events/0]
    2     0 root     SW<      0   0% [kthreadd]
  635     2 root     SW<      0   0% [jfsSync]
  640     2 root     SW<      0   0% [khubd]
    5     2 root     SW<      0   0% [khelper]
   15     2 root     SW<      0   0% [kblockd/0]
   16     2 root     SW<      0   0% [kseriod]
   33     2 root     SW       0   0% [pdflush]
Mem: 59496K used, 2144K free, 0K shrd, 3420K buff, 47332K cached
Load average: 0.01 0.28 0.29
  PID  PPID USER     STAT   VSZ %MEM COMMAND
  679     1 root     S     2572   4% /usr/sbin/mDNSResponder
  680   679 root     S     2572   4% /usr/sbin/mDNSResponder
  682   680 root     S     2572   4% /usr/sbin/mDNSResponder
  601     1 root     S     1420   2% /sbin/syslogd -C
  683     1 root     S     1412   2% /usr/sbin/telnetd
  697   683 root     S     1412   2% -sh
  711   683 root     S     1412   2% -sh
    1     0 root     S     1408   2% init 
  723   711 root     R     1404   2% top
  689     1 root     S     1404   2% /usr/sbin/httpd httpd -c /etc/httpd.webif -
  686     1 root     S      868   1% /usr/sbin/bftpd -d
  692     1 root     S      656   1% avr_evtd
    3     2 root     SWN      0   0% [ksoftirqd/0]
    4     2 root     SW<      0   0% [events/0]
    2     0 root     SW<      0   0% [kthreadd]
  635     2 root     SW<      0   0% [jfsSync]
  640     2 root     SW<      0   0% [khubd]
    5     2 root     SW<      0   0% [khelper]
   15     2 root     SW<      0   0% [kblockd/0]
   16     2 root     SW<      0   0% [kseriod]
   33     2 root     SW       0   0% [pdflush]
Mem: 59496K used, 2144K free, 0K shrd, 3420K buff, 47332K cached
Load average: 0.01 0.28 0.28
  PID  PPID USER     STAT   VSZ %MEM COMMAND
  679     1 root     S     2572   4% /usr/sbin/mDNSResponder
  680   679 root     S     2572   4% /usr/sbin/mDNSResponder
  682   680 root     S     2572   4% /usr/sbin/mDNSResponder
  601     1 root     S     1420   2% /sbin/syslogd -C
  683     1 root     S     1412   2% /usr/sbin/telnetd
  697   683 root     S     1412   2% -sh
  711   683 root     S     1412   2% -sh
    1     0 root     S     1408   2% init 
  723   711 root     R     1404   2% top
  689     1 root     S     1404   2% /usr/sbin/httpd httpd -c /etc/httpd.webif -
  686     1 root     S      868   1% /usr/sbin/bftpd -d
  692     1 root     S      656   1% avr_evtd
    3     2 root     SWN      0   0% [ksoftirqd/0]
    4     2 root     SW<      0   0% [events/0]
    2     0 root     SW<      0   0% [kthreadd]
  635     2 root     SW<      0   0% [jfsSync]
  640     2 root     SW<      0   0% [khubd]
    5     2 root     SW<      0   0% [khelper]
   15     2 root     SW<      0   0% [kblockd/0]
   16     2 root     SW<      0   0% [kseriod]
   33     2 root     SW       0   0% [pdflush]
foonas-em$ kill -help
sh: bad signal name 'help'
foonas-em$ kill
sh: you need to specify whom to kill
foonas-em$ kill /help
sh: bad pid '/help'
foonas-em$ reboot
stopped /usr/sbin/httpd (pid 689)
stopped /usr/sbin/bftpd (pid 686)

















































































































































Linux lsmipsel 2.6.30.5 #1 Wed Aug 19 12:29:09 CDT 2009 mips

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Wed Dec 31 18:30:54 1969 from 192.168.11.149
lsmipsel:~# unmae -a
-bash: unmae: command not found
lsmipsel:~# uname -a
Linux lsmipsel 2.6.30.5 #1 Wed Aug 19 12:29:09 CDT 2009 mips GNU/Linux
lsmipsel:~# date
Thu Jan  1 00:04:54 CST 1970
lsmipsel:~# date 082908542009
Sat Aug 29 08:54:00 CDT 2009
lsmipsel:~# hwclock -w
Timed out waiting for time change.
lsmipsel:~# hwclock -w
lsmipsel:~# date
Sat Aug 29 08:54:18 CDT 2009
lsmipsel:~# cd  /lib/modules/2.6.30.5
lsmipsel:/lib/modules/2.6.30.5# depmod -a
lsmipsel:/lib/modules/2.6.30.5# apt-get update
Get:1 http://security.debian.org lenny/updates Release.gpg [835B]             
Get:2 http://security.debian.org lenny/updates Release [40.8kB]           
Get:3 http://security.debian.org lenny/updates/main Packages [214kB]           
Get:4 http://mirrors.kernel.org lenny Release.gpg [1032B]                     
Get:5 http://mirrors.kernel.org lenny Release [73.6kB]
Get:6 http://security.debian.org lenny/updates/main Sources [58.5kB]     
Get:7 http://mirrors.kernel.org lenny/main Packages [6745kB]                   
Get:8 http://mirrors.kernel.org lenny/main Sources [2981kB]                   
Fetched 10.1MB in 1min29s (112kB/s)                                           
Reading package lists... Done
lsmipsel:/lib/modules/2.6.30.5#               


Top
   
PostPosted: Sat Aug 29, 2009 3:01 am 
Offline
Site Admin
User avatar

Joined: Mon Aug 28, 2006 1:15 am
Posts: 2606
yes!

The network stuff is probably the last stuff to fix. My guess is that these should work for you.

Code:
lsmipsel:/# cat /etc/network/interfaces 
# Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or
# /usr/share/doc/ifupdown/examples for more information.
auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
   address 192.168.11.150             ##    this is the address your LS2 will show up at
   netmask 255.255.255.0             ##    leave as is
   broadcast 192.168.11.255          ##    leave as is 
   gateway 192.168.11.1                    ##    must match your router (in your house) addre
   network 192.168.11.0                        ##    leave as is


Code:
lsmipsel:/# cat /etc/resolv.conf 
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
#     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 192.168.11.1                            ##    must match your router (in your house) address
nameserver 216.165.129.158                      ##  consult your internet provider
search tds.net                                          ##  consult your internet provider



If you try these and it still doesn't work, then can you please post (or send via LSWiki PM Message) your network information. Also, show what your network scanner __did__ find... Again, if you don't want to show these publicly, then you can send them in a PM.

_________________
LS1 (foonas, nfs, Tranmission & p910nd print server, Firefly for my Roku)
LS-HG500 (Lenny)
Various LS-Pros v1,v2 (unbricked w/ serial & jtag)
KuroPro, LS2 & KuroHG (foonas)
Working on davysweather.dyndns.org lately...

=> wooohooo!
wooohooo!
Unknown command 'wooohooo!' - try 'help'


Top
   
PostPosted: Sat Aug 29, 2009 3:02 am 
Offline
Site Admin
User avatar

Joined: Mon Aug 28, 2006 1:15 am
Posts: 2606
alright then!

:)

let us know how it goes! :biglol: :up:

_________________
LS1 (foonas, nfs, Tranmission & p910nd print server, Firefly for my Roku)
LS-HG500 (Lenny)
Various LS-Pros v1,v2 (unbricked w/ serial & jtag)
KuroPro, LS2 & KuroHG (foonas)
Working on davysweather.dyndns.org lately...

=> wooohooo!
wooohooo!
Unknown command 'wooohooo!' - try 'help'


Top
   
PostPosted: Sat Aug 29, 2009 3:50 am 
Offline
Newbie

Joined: Thu Feb 14, 2008 5:28 am
Posts: 45
This is the unexpected success...
I was thinking what's the problem and I tried to connect to LS again. It's connected!!:))
I am now restarting the LS and try to connect it again, but I found it takes really a long time.. at least 10 mins.... Is this a little strange?
I am going outside now! I will do more testing later!

Thank you very much indeed!


Top
   
PostPosted: Sat Aug 29, 2009 4:26 am 
Offline
Site Admin
User avatar

Joined: Mon Aug 28, 2006 1:15 am
Posts: 2606
you should check your date and hwclock... it was probably running fsck ... on both partitions...

this sometimes happens when the clock becomes confused... just make sure you set the hwclock as shown in the directions...

rebooting after this should not take extra time...

You did the tune2fs -i 0 -c 0 ?

_________________
LS1 (foonas, nfs, Tranmission & p910nd print server, Firefly for my Roku)
LS-HG500 (Lenny)
Various LS-Pros v1,v2 (unbricked w/ serial & jtag)
KuroPro, LS2 & KuroHG (foonas)
Working on davysweather.dyndns.org lately...

=> wooohooo!
wooohooo!
Unknown command 'wooohooo!' - try 'help'


Top
   
PostPosted: Sat Aug 29, 2009 5:02 am 
Offline
Newbie

Joined: Thu Feb 14, 2008 5:28 am
Posts: 45
here is what i did...
Code:
ide reset
ext2ls ide 0:1 /
ext2load ide 0:1 82000000 /boot/vmlinuz-2.6.30.5
setenv bootargs 'root=/dev/sda1 rw netconsole=6666@192.168.11.150/,@192.168.11.149/'
save <=== there should save the evr, otherwise it won't renew the Flash...
bootm


Now it's working... :biglol:

EDIT: I did setup the date here... so it's now the right time in the box..


Top
   
PostPosted: Sat Aug 29, 2009 5:34 am 
Offline
Site Admin
User avatar

Joined: Mon Aug 28, 2006 1:15 am
Posts: 2606
awesome to hear, nothing succeeds like success!!

;)

_________________
LS1 (foonas, nfs, Tranmission & p910nd print server, Firefly for my Roku)
LS-HG500 (Lenny)
Various LS-Pros v1,v2 (unbricked w/ serial & jtag)
KuroPro, LS2 & KuroHG (foonas)
Working on davysweather.dyndns.org lately...

=> wooohooo!
wooohooo!
Unknown command 'wooohooo!' - try 'help'


Top
   
PostPosted: Sun Aug 30, 2009 6:12 am 
Offline
Newbie

Joined: Thu Feb 14, 2008 5:28 am
Posts: 45
There are some other questions I am not very cleary :?: ...

1) it seems everytime I started the LS, I have to go to U-Boot and type these code:
Code:
ide reset
ext2ls ide 0:1 /
ext2load ide 0:1 82000000 /boot/vmlinuz-2.6.30.5
setenv bootargs 'root=/dev/sda1 rw netconsole=6666@192.168.11.150/,@192.168.11.149/'
save <=== there should save the evr, otherwise it won't renew the Flash...
bootm

Ohterwise the LS can't start normally!
Code:
C:\>nc -u -p 6666 -v 192.168.11.150 6666
192.168.11.150: inverse host lookup failed: h_errno 11004: NO_DATA
(UNKNOWN) [192.168.11.150] 6666 (?) open
.............OK Bus 1: OK
  Device 0: Model: WDC WD1600AAJB-00WRA0  Firm: 58.01H58 Ser#: W -DCWSAC2501311
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 152627.8 MB = 149.0 GB (312581808 x 512)
Boot in 01 seconds ('s' to stop)...
Loading 0:1:boot/vmlinuz

5841969 bytes read
## Booting image at 82000000 ...
Loading .text @ 0x80002000 (3678232 bytes)
Loading __ex_table @ 0x80384020 (6888 bytes)
Loading .notes @ 0x80385b08 (36 bytes)
Loading .rodata @ 0x80386000 (344160 bytes)
Loading .init.rodata @ 0x803da060 (256 bytes)
Loading .pci_fixup @ 0x803da160 (1736 bytes)
Loading __ksymtab @ 0x803da828 (18920 bytes)
Loading __ksymtab_gpl @ 0x803df210 (9248 bytes)
Loading __kcrctab @ 0x803e1630 (9460 bytes)
Loading __kcrctab_gpl @ 0x803e3b24 (4624 bytes)
Loading __ksymtab_strings @ 0x803e4d34 (61219 bytes)
Loading __param @ 0x803f3c58 (5032 bytes)
Loading .data @ 0x803f6000 (302976 bytes)
Loading .data.cacheline_aligned @ 0x80440000 (1536 bytes)
Loading .init.text @ 0x80441000 (143776 bytes)
Loading .init.data @ 0x804641a0 (21880 bytes)
Loading .init.setup @ 0x80469720 (864 bytes)
Loading .initcall.init @ 0x80469a80 (676 bytes)
Loading .con_initcall.init @ 0x80469d24 (8 bytes)
Loading .exit.text @ 0x80469d2c (3980 bytes)
Loading .init.ramfs @ 0x8046b000 (512 bytes)
Clearing .bss @ 0x8046c000 (166336 bytes)

Starting kernel @ 0x80006490...
========================================= the above is the first time LS boot up but I can't find it in my network.

U-Boot 1.1.4 LiSt V2 (mips) 1.0.1 (Sep 20 2007 - 00:42:23)
stdin :   nc
stdout:   nc
stderr:   nc
IDE:    Bus 0: .........................OK Bus 1: OK
  Device 0: Model: WDC WD1600AAJB-00WRA0  Firm: 58.01H58 Ser#: W -DCWSAC2501311
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 152627.8 MB = 149.0 GB (312581808 x 512)
Boot in 08 seconds ('s' to stop)...s

=> ext2ls ide 0:1 /
ext2ls ide 0:1 /
<DIR>       4096 .
<DIR>       4096 ..
<DIR>      16384 lost+found
       186664960 lsmipsel-lenny-v4.tar
<DIR>       4096 sys
<DIR>       4096 media
<DIR>       4096 dev
<DIR>       4096 lib
<DIR>       4096 var
<DIR>       4096 opt
<DIR>       4096 boot-em
<DIR>       4096 proc
<DIR>       4096 home
<DIR>       4096 sbin
<DIR>       4096 tmp
<DIR>       4096 bin
<DIR>       4096 mnt
<DIR>       4096 srv
<DIR>       4096 root
<DIR>       4096 boot
<DIR>       4096 usr
<DIR>       4096 selinux
<DIR>       4096 etc
=> print
print
bootcmd=run bootcmd1
nfsboot=run nfsload nfsargs;bootm
bootdelay=10
baudrate=57600
autoload=no
stdin=nc
stdout=nc
stderr=nc
ipaddr=192.168.11.150
netmask=255.255.255.0
serverip=192.168.11.149
ncip=192.168.11.149
netretry=no
nc=setenv stdin nc;setenv stdout nc;setenv stderr nc
ser=setenv stdin serial;setenv stdout serial;setenv stderr serial
ldaddr=82000000
guaddr=81000000
hdpart=0:1
hdload=echo Loading ${hdpart}:${hdfile};ext2load ide ${hdpart} ${ldaddr} ${hdfile}
boothd=setenv bootargs root=/dev/hda1;bootm ${ldaddr}
hdboot=run hdload boothd
flboot=setenv bootargs root=/dev/hda1;bootm bfc40000
emboot=setenv bootargs root=/dev/ram0;bootm bfc40000
rootpath=/opt/nfsroot/mipsel
nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} ip=${ipaddr}:${serverip}:${ga
tewayip}:${netmask}:${hostname}::off
nfsfile=vmlinuz
nfsload=nfs ${ldaddr} ${serverip}:${rootpath}/${nfsfile}
bootretry=30
bootcmd1=run hdboot;run flboot
bootcmd2=run flboot
bootcmd3=run emboot
ubpart=0:3
ubfile=share/u-boot/u-boot-v2-mips.flash.bin
ubload=echo Loading ${ubpart}:${ubfile};ext2load ide ${ubpart} ${ldaddr} ${ubfile}
ubsaddr=bfc00000
ubeaddr=bfc2ffff
ubflash=protect off ${ubsaddr} ${ubeaddr};era ${ubsaddr} ${ubeaddr};cp.b ${ldaddr} ${ubsaddr} ${filesi
ze};cmp.b ${ldaddr} ${ubsaddr} ${filesize}
upgrade=run ubload ubflash
ethact=rc32434_eth
hdfile=boot/vmlinuz
filesize=592431
bootargs=root=/dev/sda1 rw netconsole=6666@192.168.11.150/,@192.168.11.149/

Environment size: 1455/65532 bytes
=> ext2load ide 0:1 82000000 /boot/vmlinuz-2.6.30.5
ext2load ide 0:1 82000000 /boot/vmlinuz-2.6.30.5

5841969 bytes read
=> setenv bootargs 'root=/dev/sda1 rw netconsole=6666@192.168.11.150/,@192.168.11.149/'
setenv bootargs 'root=/dev/sda1 rw netconsole=6666@192.168.11.150/,@192.168.11.149/'
=> help
help
?       - alias for 'help'
base    - print or set address offset
bdinfo  - print Board Info structure
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootelf - Boot from an ELF image in memory
bootm   - boot application image from memory
bootp   - boot image via network using BootP/TFTP protocol
bootvx  - Boot vxWorks from an ELF image
cmp     - memory compare
coninfo - print console devices and information
cp      - memory copy
crc32   - checksum calculation
dhcp    - invoke DHCP client to obtain IP/boot params
diskboot- boot from IDE device
echo    - echo args to console
erase   - erase FLASH memory
ext2load- load binary file from a Ext2 filesystem
ext2ls  - list files in a directory (default /)
flinfo  - print FLASH memory information
go      - start application at address 'addr'
help    - print online help
ide     - IDE sub-system
loadb   - load binary file over serial line (kermit mode)
loads   - load S-Record file over serial line
loop    - infinite loop on address range
md      - memory display
mm      - memory modify (auto-incrementing)
mtest   - simple RAM test
mw      - memory write (fill)
nfs     - boot image via network using NFS protocol
nm      - memory modify (constant address)
pci     - list and access PCI Configuration Space
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
protect - enable or disable FLASH write protection
rarpboot- boot image via network using RARP/TFTP protocol
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv  - set environment variables
tftpboot- boot image via network using TFTP protocol
version - print monitor version
=> saveenv
saveenv
Saving Environment to Flash...
Un-Protected 1 sectors
Erasing Flash...
Flash erase: first = 10 @ 0xbfc30000
             last  = 10 @ 0xbfc30000
Flash erase: Done
Erased 1 sectors
Writing to Flash... done
Protected 1 sectors
=> bootm <==============I tried to use <boot> here, it doesn't work. I guess it didn't save to flash, and it could only start from memory..
bootm
## Booting image at 82000000 ...
Loading .text @ 0x80002000 (3678232 bytes)
Loading __ex_table @ 0x80384020 (6888 bytes)
Loading .notes @ 0x80385b08 (36 bytes)
Loading .rodata @ 0x80386000 (344160 bytes)
Loading .init.rodata @ 0x803da060 (256 bytes)
Loading .pci_fixup @ 0x803da160 (1736 bytes)
Loading __ksymtab @ 0x803da828 (18920 bytes)
Loading __ksymtab_gpl @ 0x803df210 (9248 bytes)
Loading __kcrctab @ 0x803e1630 (9460 bytes)
Loading __kcrctab_gpl @ 0x803e3b24 (4624 bytes)
Loading __ksymtab_strings @ 0x803e4d34 (61219 bytes)
Loading __param @ 0x803f3c58 (5032 bytes)
Loading .data @ 0x803f6000 (302976 bytes)
Loading .data.cacheline_aligned @ 0x80440000 (1536 bytes)
Loading .init.text @ 0x80441000 (143776 bytes)
Loading .init.data @ 0x804641a0 (21880 bytes)
Loading .init.setup @ 0x80469720 (864 bytes)
Loading .initcall.init @ 0x80469a80 (676 bytes)
Loading .con_initcall.init @ 0x80469d24 (8 bytes)
Loading .exit.text @ 0x80469d2c (3980 bytes)
Loading .init.ramfs @ 0x8046b000 (512 bytes)
Clearing .bss @ 0x8046c000 (166336 bytes)

Starting kernel @ 0x80006490...
======================================>The second time I type these code and it boot up so fast, I can ssh to LS in one min!


I think is there anything I didn't do the right? I didn't save the setting to U-Boot properly? or I have to replace the vmlinuz-2.6.30.5 to vmlinuz? or I can make a In -s to this file? Can you kindly help me how to save this environment as default?

2) My network is not based on 192.168.11.x... Actually it's 192.168.1.x.... I want to change the LS to 192.168.1.150 but I don't know is there any question? I have a lot of settings which base on the 192.168.1.x, so it will be very hard to change all the settings to 192.168.11.x..As far as I know, the U-boot is desigend with 192.168.11.150, if I changed the IP to 192.168.1.x, it won't work anymore? Am I right? Is there any other thing I need to attention?

3) I saw the source file in this Lenny is based on the following
Code:
deb http://mirrors.kernel.org/debian lenny main
deb-src http://mirrors.kernel.org/debian lenny main
deb http://security.debian.org/ lenny/updates main
deb-src http://security.debian.org/ lenny/updates main
#deb http://mirrors.kernel.org/debian sid main

it's not the best choice for me and I would like to replce with another one... Is there any problem? Actually I would like to know if it's any limitation to this debian Lenny?

4) Yesterday before I shutdown the power, I checked the data and hwclock. it seems no problem. but when I booted up the LS today, I checked again. I found the date is one hour early
Code:
lsmipsel:~# date
Sun Aug 30 11:40:08 CDT 2009
lsmipsel:~# date 083012432009
Sun Aug 30 12:43:00 CDT 2009
lsmipsel:~# hwclock -w
lsmipsel:~# hwclock -w
lsmipsel:~# date
Sun Aug 30 12:43:21 CDT 2009
lsmipsel:~# date
Sun Aug 30 12:57:23 CDT 2009
lsmipsel:~# hwclock
Sun Aug 30 13:00:11 2009  -0.761618 seconds

Is this a time issue? or it's just because I didn't power on the box(I guess so)..

Thanks for your help!


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 48 posts ]  Go to page Previous 1 2 3 4 Next

All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot] and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
cron
Powered by phpBB® Forum Software © phpBB Limited