1) it seems everytime I started the LS, I have to go to U-Boot and type these code:
ext2ls ide 0:1 /
ext2load ide 0:1 82000000 /boot/vmlinuz-188.8.131.52
setenv bootargs 'root=/dev/sda1 rw firstname.lastname@example.org/,@192.168.11.149/'
save <=== there should save the evr, otherwise it won't renew the Flash...
I seem to remember haven't this sort of problem, had to change bootcmd, try something like:
set bootcmd4 ext2load ide 0:1 82000000 boot/vmlinuz\; set bootargs root=/dev/sda1 rw\; bootm 82000000
set bootcmd run bootcmd4
Providing you have a link from vmlinuz-2.6.30.* to vmlinuz ^^^
Yes you can change the address, davygravy wrote an article I think > HERE
Yes you change it to pull updates from where suits you
Have you run dpkg-reconfigure tzdata and do you have ntp installed?