Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Thu Nov 23, 2017 6:47 am

All times are UTC+01:00




Post new topic  Reply to topic  [ 26 posts ]  Go to page Previous 1 2
Author Message
PostPosted: Sat May 09, 2009 10:37 pm 
Offline
Regular Member

Joined: Fri Oct 26, 2007 11:35 pm
Posts: 88
Bauldrick wrote:
I might be wrong here, but
Bauldrick wrote:
IIRC you always receive "update failed" when using firmware updater on LS2, aslong as you're on 192.168.11.xxx you should be able to ssh in.


If you're on 192.168.1.xxx and you flash freelink - freelink has no dhcp, but static 192.168.11.150. So once it's finished flashing the flasher can't see the LS because it's at a different address. That doesn't explain why stock/openlink doesn't/didn't work mind.

Did you get this 192.168.1.64 after flashing stock/openlink?

If it isn't a royal pain in the arse, try changing to 192.168.11.x and flash again


I've not re-tried the stock/openlink firmware, but i'll give freelink another go on 192.168.11.x

thanks


Top
   
PostPosted: Sun May 10, 2009 6:18 pm 
Offline
Regular Member

Joined: Fri Oct 26, 2007 11:35 pm
Posts: 88
tried that, firmware flashed with freelink, still in 198.162.11.150, but the ssh connection is being refused.

just tried it again with openlink, same result with ssh, telnet connections just close putty down.


Top
   
PostPosted: Mon May 11, 2009 8:47 pm 
Offline
Betatester
User avatar

Joined: Thu Jul 14, 2005 4:38 pm
Posts: 941
Location: England
maxnutter wrote:
198.162.11.150


typo yeah?

I dunno :? must be something really obvious mind


Top
   
PostPosted: Mon May 11, 2009 8:51 pm 
Offline
Regular Member

Joined: Fri Oct 26, 2007 11:35 pm
Posts: 88
Bauldrick wrote:
maxnutter wrote:
198.162.11.150


typo yeah?

I dunno :? must be something really obvious mind


yes, sorry, a tyop ... i know it's something obvious, it's starting to do my head in!!

thanks for the help.


Top
   
PostPosted: Tue May 12, 2009 10:41 am 
Offline
Regular Member

Joined: Fri Oct 26, 2007 11:35 pm
Posts: 88
just wondering, what state should the LS2 be in if I manually untar the image?
do i need to reboot without dhcp to get it to stay in 192.168.11.x?
should i then be able to ssh in (or telnet if i use stock f/w)?

thta's possibly the one combination i haven't tried


Top
   
PostPosted: Tue May 12, 2009 12:25 pm 
Offline
Site Admin
User avatar

Joined: Sun Jul 17, 2005 4:34 pm
Posts: 5332
What image exactly?


Top
   
PostPosted: Tue May 12, 2009 3:11 pm 
Offline
Regular Member

Joined: Fri Oct 26, 2007 11:35 pm
Posts: 88
andre wrote:
What image exactly?


the freelink 13.37 firmware (in freelink_mipsel-hdhlan-060810.zip)


Top
   
PostPosted: Mon May 18, 2009 11:54 am 
Offline
Regular Member

Joined: Fri Oct 26, 2007 11:35 pm
Posts: 88
no, that doesn't work either, connections still refused.

after an update, do I attempt to SSH in from a PC on 192.168.1.xx, or from 192.168.11.x, as the LS2 still has the EM ip address 192.168.11.150?


Top
   
PostPosted: Tue Jun 09, 2009 1:12 pm 
Offline
Regular Member

Joined: Fri Oct 26, 2007 11:35 pm
Posts: 88
right, i've managed to twice flash back to the stock firmware, but I can't get freelink to work, it just seems to remain in EM-mode, no matter how many times i flash it.

what next? do i 'trick' it into EM mode, then flash it (maybe twice)?


Top
   
PostPosted: Sat Jun 13, 2009 8:49 pm 
Offline
Betatester
User avatar

Joined: Thu Jul 14, 2005 4:38 pm
Posts: 941
Location: England
maxnutter wrote:
it just seems to remain in EM-mode


So the firmware updater recognises it and it has the name EM-MODE or similer?


Top
   
PostPosted: Sat Jun 13, 2009 11:43 pm 
Offline
Regular Member

Joined: Fri Oct 26, 2007 11:35 pm
Posts: 88
Bauldrick wrote:
maxnutter wrote:
it just seems to remain in EM-mode


So the firmware updater recognises it and it has the name EM-MODE or similer?


exactly


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 26 posts ]  Go to page Previous 1 2

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
cron
Powered by phpBB® Forum Software © phpBB Limited