First of all, thank you all for your work, I finally migrated to lenny thanks to your howtos and files.
Since my own builds of the 2.6.34 kernel result in cyclic reboots (what I understand as non-working
), I ask myself whether you do cross-compiling or compile directly on the box to get your kernel running. I do it (short-version) this way, using debs config
and the 184.108.40.206 source from kernel.org
make ARCH=arm CROSS_COMPILE=/opt/sourcery/bin/arm-none-linux-gnueabi- zImage
make ARCH=arm CROSS_COMPILE=/opt/sourcery/bin/arm-none-linux-gnueabi- modules
make ARCH=arm CROSS_COMPILE=/opt/sourcery/bin/arm-none-linux-gnueabi- modules_install INSTALL_MOD_PATH=/mnt/usb-attached-rootfs
devio > foo 'wl 0xe3a01c06,4' 'wl 0xe3811031,4' # Linkstation Pro/Live
cat foo arch/arm/boot/zImage > zImage.new
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n 'linux' -d zImage.new uImage.new
cp uImage.new /mnt/usb-attached-boot
ln -s uImage.new uImage.buffalo
The result is a reboot loop of my LS Live v2. debs 220.127.116.11 kernel build
is working though, as well as my cross-compiled 2.6.33 from the marvell git
. Or any known issues beyond the 18.104.22.168 with the sourcery toolchain? I'm currently trying a build directly on the box but it takes ages
So any hint is appreciated!