Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Fri Aug 17, 2018 8:29 am

All times are UTC+01:00




Post new topic  Reply to topic  [ 743 posts ]  Go to page Previous 146 47 48 49 50 Next
Author Message
PostPosted: Sun Mar 07, 2010 8:24 pm 
Offline
Newbie

Joined: Sun Feb 22, 2009 5:14 pm
Posts: 24
Ahhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh!

That's been annoying the living daylights out of me, I've tried config after config. Particularly frustrating given that it takes the best part of a day to compile the lot...!

2.6.33 working perfectly for me now (so far anyway). Thanks so much!


Top
   
PostPosted: Mon Mar 08, 2010 6:20 pm 
Offline
Total Newbie

Joined: Fri Mar 21, 2008 8:35 pm
Posts: 4
Thanks for the fix for the NFS server. I googled before posting but didn't find it.

deb wrote:
Also, I would appreciate it if some one else tried to compile a 2.6.33 kernel using my script from my git repository and the config from the 2.6.32.7 kernel. I managed to hit a few module compilation bugs and some one on the kernel mailing list think my device might have bad ram. It is probably a gcc error and is triggered / picked up while building kernel modules.

I think perhaps it is something in the 2.6.32.7 kernel? I was using the kernel on a Myth 0.22 backend box and mythtv-setup immediately exists with a segmentation fault (no other output/messages, just an immediate seg fault). I switched back to the 2.6.31 kernel and mythtv-setup works fine. ???


Top
   
PostPosted: Sun Mar 14, 2010 6:39 pm 
Offline
Newbie

Joined: Fri Aug 24, 2007 4:59 am
Posts: 37
Hi, thanks to all the contributors, I now got 2.6.32.7 on my LS-GL (from 2.6.29.1).

After the update though, I am getting segmentation fault when I run apt-get or aptitude. Does anyone else have this problem? What can I do to fix this?

Thanks. I'm still a beginner with Debian :)


Top
   
PostPosted: Tue Mar 16, 2010 10:17 pm 
Offline
Newbie

Joined: Sun Feb 22, 2009 5:14 pm
Posts: 24
I got 2.6.33.1 to build today using deb's build script (.config from 2.6.33, which was itself from 2.6.32.7).

It's running now in my LS without a hitch.


Top
   
PostPosted: Tue Mar 16, 2010 10:22 pm 
Offline
Newbie

Joined: Sun Feb 22, 2009 5:14 pm
Posts: 24
fantasymick wrote:
Hi, thanks to all the contributors, I now got 2.6.32.7 on my LS-GL (from 2.6.29.1).

After the update though, I am getting segmentation fault when I run apt-get or aptitude. Does anyone else have this problem? What can I do to fix this?

Thanks. I'm still a beginner with Debian :)


Are there specific options for aptitude (eg remove, update safe-upgrade) which are causing it or is it just any aptitude call?


Top
   
PostPosted: Thu Mar 18, 2010 3:40 pm 
Offline
Newbie

Joined: Fri Aug 24, 2007 4:59 am
Posts: 37
mipmapped: It's any aptitude or apt-get call (i.e. just entering "aptitude" in the terminal).

I followed the instructions from TekBLang and ares posts to upgrade.

Samba and numerous other server programs I run regularly are working fine as before. uname -a shows the right version number also.

Thanks for any assistance.


Top
   
PostPosted: Sat Mar 20, 2010 1:08 pm 
Offline
Newbie

Joined: Mon May 25, 2009 4:11 pm
Posts: 30
For those who tried to run my 2.6.32.7 did you extract the modules and run modprobe ?

I think that that kernel build might have been buggy, i have uploaded a 2.6.33 kernel + modules...


Top
   
PostPosted: Sun Mar 21, 2010 3:05 pm 
Offline
Newbie

Joined: Fri Aug 24, 2007 4:59 am
Posts: 37
Hi deb, I updated to 2.6.33 (yes the modules were also updated) and it fixed the problem. apt-get & aptitude runs fine now. Thanks for all your work :up:.


Top
   
PostPosted: Wed May 19, 2010 8:16 pm 
Offline
Newbie

Joined: Mon May 25, 2009 4:11 pm
Posts: 30
2.6.34 is on my github

mm I seem to be having problems with samba and that kernel.... couldn't reproduce it - must be a samba bug.


Top
   
PostPosted: Tue Jun 01, 2010 8:12 am 
Offline
Newbie

Joined: Sat Oct 24, 2009 1:46 pm
Posts: 48
Thank deb and davy_gravy very much, I have 2.6.34 run on my LS-GL now.............cooool...

Any chance we got this 2.6.34 on XHL ? I successfully put the 2.6.22 into my XHL but I have to retain the stock kernel uImage for XHL boot (as wiki said). XHL doesn't have any serial access being found so far......


Top
   
PostPosted: Wed Jun 02, 2010 11:39 am 
Offline
Total Newbie

Joined: Tue May 25, 2010 10:48 am
Posts: 2
How long does it take to install Debian with the default options? i'm about to install debian with a netinst CD. How long does it take? and will the installer make a swap partition by it-self or do i have to make one manually?
_________________
yahoo keyword tool ~ overture ~ traffic estimator ~ adwords traffic estimator


Top
   
PostPosted: Mon Jun 07, 2010 6:50 am 
Offline
Newbie

Joined: Sat Oct 24, 2009 1:46 pm
Posts: 48
Hi All,

Sorry for my stupid question, I installed the image from davy_gravy and found that we have to set the boot command in UBoot to another, i.e. on V1 we have:

Code:
bootcmd=ide reset; ext2load ide 1:1 0x00100000 /uImage; setenv bootargs console=ttyS0,115200 root=/dev/sda2 rw ; bootm 0x00100000


Since we did that, we can not get the stock FW installed again unless we have to change the bootcmd to original one (it will load uImage.buffalo instead of uImage

Code:
bootcmd=ide reset; ext2load ide 1:1 0x00100000 /uImage.buffalo; setenv bootargs console=ttyS0,115200 root=/dev/sda2 rw ; bootm 0x00100000


May I ask why we did change the Uboot env vars? Just a stupid question..........


Top
   
PostPosted: Fri Jun 18, 2010 6:30 am 
Offline
Newbie

Joined: Sat Oct 24, 2009 1:46 pm
Posts: 48
Hi deb,
2.6.34 now but I can not mount samba share (Samba 3) with smbfs...

everytime I tried

mount -t smbfs //myserver/share /mnt/share -o ip=X.X.X.X

the error is cifs is not supported by the system........

Tried modprobe to load the cifs/smbfs module but failed. We didn't support cifs/smbfs in this kernel version?

Thanks


Top
   
PostPosted: Fri Jul 23, 2010 7:33 am 
Offline
Newbie

Joined: Mon May 25, 2009 4:11 pm
Posts: 30
2.6.34.1 has been uploaded to my github


Also, I don't use cifs I use nfs :)
does smbmount need a kernel module other than fuse?
Please check you have the correct username / password ^^


Top
   
PostPosted: Wed Aug 18, 2010 6:48 am 
Offline
Moderator
User avatar

Joined: Thu Apr 06, 2006 1:33 pm
Posts: 1082
Location: United States of America
Has anyone here tried this procedure?
http://www.cyrius.com/debian/orion/buff ... stall.html

Either on the KuroBox Pro, or possibly on a properly modified Linkstation Pro???

_________________
-Ramuk

LinkStation HG *250 Uboot - Foonas-EM - Freelink
Kuro HG *750 Uboot - Foonas-EM - Debian Squeeze
Kuro HD *60 Uboot - Foonas-EM - Debian Squeeze (For Sale)
KuroPro *2TB Debian Lenny Armel- Kernel 2.6.26
KuroPro *1TB Debian Lenny Armel- Kernel 2.6.25.6


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 743 posts ]  Go to page Previous 146 47 48 49 50 Next

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited