Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Sat Feb 24, 2018 3:11 pm

All times are UTC+01:00




Post new topic  Reply to topic  [ 364 posts ]  Go to page Previous 121 22 23 24 25 Next
Author Message
PostPosted: Tue May 06, 2008 4:21 pm 
Offline
Newbie

Joined: Sun Oct 21, 2007 5:55 am
Posts: 26
TWSI - that sounds right, I googled around and couldn't find much reference (in English) but serial was definitely mentioned.

I am running a Kuro-pro, I did forget to mention that. No USB hub of any kind, no hardware modifications of any kind - just a 500GB SATA drive and a USB Canon printer.

I did experiment and the messages appear in the logs even if the printer-USB cable is physically disconnected from the Kuro.

I was running "2.6.16.16-teralive110gpl4LSPro-mb_v6" in the past and didn't have the messages then. These appeared only after replacing the kernel with "2.6.16.57-lsp_eabi-dh_v4". I can revert back to the old kernel and the messages disappear.


Top
   
PostPosted: Thu May 29, 2008 7:15 am 
Offline
Newbie

Joined: Tue Jul 17, 2007 2:47 pm
Posts: 64
Hey,

yesterday I tried to crosscompile some modules for my LS PRO V2 with stock 1.12a firmware,
so I used howto install the codesourcery crosstoolchains for compiling the kernel from mindbender with my Ubuntu 7.10(VMWarePlayer)

I added an entry to $PATH that links to the /bin directory of 2005q3-Crosstoolchain and made a chmod a+rx on mkimage.
I also extracted the kernel-src of linux-2.6.16_lsp.1.7.8 to ../COMPILING/KERNELS and copied the right .config-file from the buffalo directory.

Everything seemed fine so why don't do a make menconfig :D
This was the result:
Code:
jars@jars-desktop:~/toolchain_arm/CROSSCOMPILING/CROSSTOOLCHAINS/COMPILING/KERNELS/linux-2.6.16_lsp.1.7.8$ make menuconfig
  HOSTCC  scripts/basic/fixdep
scripts/basic/fixdep: 1: Syntax error: word unexpected (expecting ")")
make[1]: *** [scripts/basic/fixdep] Fehler 2
make: *** [scripts_basic] Fehler 2

:(

Could anyone please help me with that?

Thanks a lot.
Regards, ares

_________________
LSProV2::Debian Lenny by davy_gravy::Kernel 2.6.32 with CESA by balou1974::Webmin::Fuppes UPNP Server::SFTP with MySecureShell


Top
   
PostPosted: Thu May 29, 2008 7:52 pm 
Offline
Site Admin
User avatar

Joined: Sun Jul 17, 2005 4:34 pm
Posts: 5332
Not sure, but I would just run "make oldconfig" instead. See if that gives...


Top
   
PostPosted: Thu May 29, 2008 9:14 pm 
Offline
Newbie

Joined: Tue Jul 17, 2007 2:47 pm
Posts: 64
Hi andre,

thanks for your answer.

Make oldconfig just throws the same error:
Code:
jars@jars-desktop:~/toolchain_arm/CROSSCOMPILING/CROSSTOOLCHAINS/COMPILING/KERNELS/linux-2.6.16_lsp.1.7.8$ make oldconfig
  HOSTCC  scripts/basic/fixdep
scripts/basic/fixdep: 1: Syntax error: word unexpected (expecting ")")
make[1]: *** [scripts/basic/fixdep] Fehler 2
make: *** [scripts_basic] Fehler 2


Any other hints?

Regards, ares

_________________
LSProV2::Debian Lenny by davy_gravy::Kernel 2.6.32 with CESA by balou1974::Webmin::Fuppes UPNP Server::SFTP with MySecureShell


Top
   
PostPosted: Sat May 31, 2008 3:10 pm 
Offline
Newbie

Joined: Tue Jul 17, 2007 2:47 pm
Posts: 64
Somehow my Ubuntu was the problem. I guess I played around with gcc and that stuff to much.
I started a new one with my vmware-player and everything went fine...

Sorry for wasting your time...

Regards,
ares

_________________
LSProV2::Debian Lenny by davy_gravy::Kernel 2.6.32 with CESA by balou1974::Webmin::Fuppes UPNP Server::SFTP with MySecureShell


Top
   
PostPosted: Sat Aug 16, 2008 9:26 am 
Offline
Regular Member

Joined: Mon May 21, 2007 11:27 am
Posts: 80
Folks, allow me a dumb question, as I am not familiar with Kernel. My Freelink (Linux Version 2.6.16.16-teralive110gpl4LSPro-m) seem to running fine for the moment with mdadm support, should I upgrade to Duncan's 2.6.16.57. If so, which version should I use?


Top
   
PostPosted: Sat Aug 23, 2008 11:50 am 
Offline
Regular Member

Joined: Mon May 21, 2007 11:27 am
Posts: 80
dommer wrote:
Folks, allow me a dumb question, as I am not familiar with Kernel. My Freelink (Linux Version 2.6.16.16-teralive110gpl4LSPro-m) seem to running fine for the moment with mdadm support, should I upgrade to Duncan's 2.6.16.57. If so, which version should I use?

Where are all the Kernel Guru? No taker? Thanks in advance.


Top
   
PostPosted: Sat Aug 23, 2008 8:44 pm 
Offline
Regular Member
User avatar

Joined: Tue Oct 09, 2007 9:01 am
Posts: 117
The .57 has better security, if everything is working ok for you there is not really a need for upgrading (to .57).


Top
   
PostPosted: Sat Aug 23, 2008 11:11 pm 
Offline
Regular Member

Joined: Mon May 21, 2007 11:27 am
Posts: 80
stjopa wrote:
The .57 has better security, if everything is working ok for you there is not really a need for upgrading (to .57).

Many thanks.


Top
   
PostPosted: Thu Jan 08, 2009 8:53 pm 
Offline
Total Newbie

Joined: Wed Jan 07, 2009 11:12 pm
Posts: 2
@duncan_h

Hello!
I´m using your kernel-2.6.16.57-lsp_oabi-dh_v6 kernel on my Linkstation v1 with Freelink because i need iptables.
My Problem is, when i use the new kernel xfs has on sda6 errors, the directorys and files are corrupt. But Iptables and all other work fine!
When i switch back to the 2.6.12.6-arm1 sda6 mount perferctly.
Can anyone help me?

Thanks Peter

Sorry my English is bad..


Top
   
PostPosted: Fri Jan 09, 2009 10:04 am 
Offline
Regular Member

Joined: Mon Oct 15, 2007 5:21 am
Posts: 144
The 2.6.16.57-lsp_oabi-dh_v6 kernel (natively-compiled on a Freelink debian-arm Linkstation) isnt reliable with xfs. (2.6.16.57-lsp_eabi-dh_v4 seems good) 2.6.12.6-arm1 is an eabi kernel too.

The recommended way to get iptables working is to use the eabi version of the kernel with debian-armel,
which means replacing the root file system with a debian-armel lenny one. (like lb-worms one) (armel=eabi, arm=oabi).

To make iptables work you need either arm+oabi kernel or armel+eabi kernel. But you need to convert the
xfs files systems to ext3 or jfs if you use the oabi kernel. Sorry.

I don't recommend using the oabi kernel.


Top
   
PostPosted: Fri Jan 09, 2009 10:30 am 
Offline
Total Newbie

Joined: Wed Jan 07, 2009 11:12 pm
Posts: 2
Hello Duncan_h!

Replacing the root file system with a debian-armel lenny one is the best way? My Reason is my System has, Webmin, Mysql, Apache2, Mediatomb, Torrentflux etc running. That may be a lot work to get this with a new root filesystem running.
Quote:
But you need to convert the
xfs files systems to ext3 or jfs if you use the oabi kernel.

My sda2 root filesystem is already ext3. But 2.6.16.57-lsp_eabi-dh_v4 kernel with iptables will not work, or does?
Quote:
The recommended way to get iptables working is to use the eabi version of the kernel with debian-armel

Where can I get the Root FS from a debian-armel distribution?
Or should i give up xfs? Is xfs Recommend on a 1500GB Partition?

Thanks!


Top
   
PostPosted: Wed Feb 11, 2009 1:32 pm 
Offline
Total Newbie

Joined: Thu May 08, 2008 5:38 pm
Posts: 4
@duncan_h : I installed 2.6.16.57-lsp_eabi-dh_v3 (over freelink 1.0 rev 2 with kernel 2.6.12.6) without any problems. After successful reboot and login I've tried to poweroff my LSLive as usual using power button on the front. But I neither heard a beep sound nor it turned down. What do I have to check to make it work again ?
Thank you !


Top
   
PostPosted: Fri Feb 13, 2009 11:33 am 
Offline
Newbie

Joined: Fri Jan 23, 2009 11:36 pm
Posts: 25
duncan_h wrote:
The 2.6.16.57-lsp_oabi-dh_v6 kernel (natively-compiled on a Freelink debian-arm Linkstation) isnt reliable with xfs. (2.6.16.57-lsp_eabi-dh_v4 seems good) 2.6.12.6-arm1 is an eabi kernel too.

The recommended way to get iptables working is to use the eabi version of the kernel with debian-armel,
which means replacing the root file system with a debian-armel lenny one. (like lb-worms one) (armel=eabi, arm=oabi).

To make iptables work you need either arm+oabi kernel or armel+eabi kernel. But you need to convert the
xfs files systems to ext3 or jfs if you use the oabi kernel. Sorry.

I don't recommend using the oabi kernel.




I got a bit mixed up from all the posts (and the one above):

I'm running stock firmware on my Linkstation Live, and I want to add iptables support (I care less about the other stuff)
what am I supposed to do / which kernel to use ?


PS: I am interested in keeping my filesystem, and continuing to use optware..


Top
   
PostPosted: Tue May 19, 2009 8:27 am 
Offline
Total Newbie

Joined: Tue May 05, 2009 10:49 pm
Posts: 4
ido wrote:

I got a bit mixed up from all the posts (and the one above):

I'm running stock firmware on my Linkstation Live, and I want to add iptables support (I care less about the other stuff)
what am I supposed to do / which kernel to use ?


PS: I am interested in keeping my filesystem, and continuing to use optware..


I want to do the same thing. Wonder if we can use iptables enabled GPL kernel with the stock firmware - I'm actually using the LS-GL_FW_103-jtymod5-printing.zip firmware.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 364 posts ]  Go to page Previous 121 22 23 24 25 Next

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited