Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Fri Dec 15, 2017 1:02 pm

All times are UTC+01:00




Post new topic  Reply to topic  [ 2 posts ] 
Author Message
 Post subject: TS Pro Jumper wiring
PostPosted: Tue May 01, 2012 11:48 pm 
Offline
Total Newbie

Joined: Sun Mar 11, 2012 10:24 pm
Posts: 2
I have a TS-1.0TGL/R5 that shuts down less than 30sec after power on, so I know it needs a JTAG flash.

I have headers on CN3, CN4 and J1 of the TS MOBO. After several hours of trying to install Openwince I gave up. I had no trouble installing UrJTAG on a Dell laptop running Fedora 16. I think I have all the files and images I need flash the box.

I have what I believe to be an ARM/Wiggler (HC244) compatible jtag. What I am missing is the jumper "table" from the JTAG to the MOBO. The JTAG dongle has the following pins:
1.VCC
2.NTRS
3.TMS
4.TCK
5.TDO
6.TDI
7.RTCK
8.NSRST
9.GND

I don't want to do something stupid by connecting a jumper wire to the wrong pin and permanently smoke the MOBO. Can someone show me which pins on the dongle, connect to which pins, on which connector on the MOBO?


Top
   
 Post subject: Re: TS Pro Jumper wiring
PostPosted: Sat May 12, 2012 5:57 pm 
Offline
Moderator
User avatar

Joined: Tue Jul 26, 2005 5:22 pm
Posts: 1123
Location: United Kingdom
The printouts are covered in the following wiki article:
http://buffalo.nas-central.org/wiki/Install_a_JTAG_Port


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 2 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited