Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Sun May 27, 2018 4:54 pm

All times are UTC+01:00




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Mon Mar 07, 2011 11:57 pm 
Offline
Newbie

Joined: Tue Aug 24, 2010 7:25 pm
Posts: 10
Hello,

Kernel 2.6.35.11 was ported to LS2 and packaged in Debian format.

The kernel uses SCSI emulation and ships both in uboot and ELF formats. Both are in the same package. Please look in /boot.

I do not know how to generate a version with the old IDE driver.

The port is based on Shihsung's patch to 2.6.30.5 and has many modules enabled.

I have not been able to change the LEDs by writing to the serial port. Please let me know if you know how to make /dev/ttyS0 work.

Upon removal the package leaves the module directory behind. Depmod creates some files that prevent full removal. This will hopefully be fixed in the next version.

Any suggestions for improvement are welcome.

Could not figure out how to upload here, so the package was uploaded to Rapid Share:

http://rapidshare.com/files/451462544/l ... mipsel.deb

Felix


Top
   
PostPosted: Thu Mar 10, 2011 2:22 am 
Offline
Betatester
User avatar

Joined: Thu Jul 14, 2005 4:38 pm
Posts: 941
Location: England
Thankyou for this lechner :up:

You should ask admins for upload access. I don't want to see this lost so I uploaded to my LS2 directory under lechner-2.6.35.11.

http://downloads.buffalo.nas-central.or ... 2.6.35.11/

Did you have to change alot from shihsungs patch in order to compile :?:


Top
   
PostPosted: Wed Mar 16, 2011 9:05 pm 
Offline
Newbie

Joined: Sun Nov 20, 2005 7:40 pm
Posts: 51
Works great*! Thank you very much!

* = Except for /dev/ttyS0, which still doesn't work, but you already mentioned that.


Top
   
PostPosted: Sat May 19, 2012 1:58 pm 
Offline
Total Newbie

Joined: Sat May 19, 2012 1:55 pm
Posts: 1
It was working fine. today I rebooted the box and got stuck at Loading Kernel...

Loading file "/boot/vmlinuz" from ide device 0:1 (hda1)
2073298 bytes read
## Booting kernel from Legacy Image at 81000000 ...
Image Name: Linux-2.6.35.11-v8-sda
2011-03-07 21:39:43 UTC
Image Type: MIPS Linux Kernel Image (gzip compressed)
Data Size: 2073234 Bytes = 2 MB
Load Address: 80002000
Entry Point: 80006230
Verifying Checksum ... OK
Uncompressing Kernel Image ...
Starting kernel ...


Top
   
PostPosted: Sun May 20, 2012 6:08 pm 
Offline
Newbie

Joined: Sun Nov 20, 2005 7:40 pm
Posts: 51
Hi Elchubi, I don't think that it got stuck at that point, but the output of the kernel is just not visible anymore. I think you should use a kernel parameter to tell your kernel to write messages to a UDP port, which you can listen to with netcat.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited