Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Tue Jan 16, 2018 4:21 pm

All times are UTC+01:00

Post new topic  Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Wed Dec 02, 2009 4:06 pm 

Joined: Thu Dec 13, 2007 2:31 pm
Posts: 21
I have met the same problem mentioned in the other u-boot topic, just wonder do we have any solution to this? Or any updated u-boot image? ( I did upgrade from the LNI's u-boot, and the printout for the memory mentioned is below.

=> md 0xb8050008 1
md 0xb8050008 1
b8050008: 00003ff7 .?..

PostPosted: Wed Dec 02, 2009 9:49 pm 
User avatar

Joined: Thu Jul 14, 2005 4:38 pm
Posts: 941
Location: England
Hi ramp

Is it the problem I saw with shihsungs uboot?

I can't quite remember, but I think it stopped rebooting after I followed his manual instructions to flash it (did you run upgrade from LNI's?)

Looking back (pages 4,5), I had to compile ncb from U-boot following shihsungs procedure too. Not that that helps apart from to connect to it.

Hope that helps

PostPosted: Thu Dec 03, 2009 3:53 am 

Joined: Thu Dec 13, 2007 2:31 pm
Posts: 21
Yes it is the same problem you met. I guess your healing is to clear the data part of the uboot, but I believe it should not be necessary, there must be something wrong in the uboot to read some unused bit in the data area. ( the NC work fine with me, I am using a windows porting of the NC)

PostPosted: Thu Dec 03, 2009 3:19 pm 

Joined: Thu Dec 13, 2007 2:31 pm
Posts: 21
Here I have the chance to dump the BFC30000 data:

md bfc30000 200
bfc30000: e650b6f9 746f6f62 3d646d63 206e7572 ..P.bootcmd=run
bfc30010: 746f6f62 31646d63 73666e00 746f6f62 bootcmd1.nfsboot
bfc30020: 6e75723d 73666e20 64616f6c 73666e20 =run nfsload nfs
bfc30030: 73677261 6f6f623b 62006d74 64746f6f args;bootm.bootd
bfc30040: 79616c65 0030313d 64756162 65746172 elay=10.baudrate
bfc30050: 3637353d 61003030 6c6f7475 3d64616f =57600.autoload=
bfc30060: 73006f6e 6e696474 00636e3d 6f647473 no.stdin=nc.stdo
bfc30070: 6e3d7475 74730063 72726564 00636e3d ut=nc.stderr=nc.
bfc30080: 6d74656e 3d6b7361 2e353532 2e353532 netmask=255.255.
bfc30090: 2e353532 656e0030 74657274 6e3d7972 255.0.netretry=n
bfc300a0: 636e006f 7465733d 20766e65 69647473 o.nc=setenv stdi
bfc300b0: 636e206e 7465733b 20766e65 6f647473 n nc;setenv stdo
bfc300c0: 6e207475 65733b63 766e6574 64747320 ut nc;setenv std
bfc300d0: 20727265 7300636e 733d7265 6e657465 err nc.ser=seten
bfc300e0: 74732076 206e6964 69726573 733b6c61 v stdin serial;s
bfc300f0: 6e657465 74732076 74756f64 72657320 etenv stdout ser
bfc30100: 3b6c6169 65746573 7320766e 72656474 ial;setenv stder
bfc30110: 65732072 6c616972 61646c00 3d726464 r serial.ldaddr=
bfc30120: 30303238 30303030 61756700 3d726464 82000000.guaddr=
bfc30130: 30303138 30303030 70646800 3d747261 81000000.hdpart=
bfc30140: 00313a30 69666468 623d656c 2f746f6f 0:1.hdfile=boot/
bfc30150: 696c6d76 007a756e 6f6c6468 653d6461 vmlinuz.hdload=e
bfc30160: 206f6863 64616f4c 20676e69 64687b24 cho Loading ${hd
bfc30170: 74726170 7b243a7d 69666468 3b7d656c part}:${hdfile};
bfc30180: 32747865 64616f6c 65646920 687b2420 ext2load ide ${h
bfc30190: 72617064 24207d74 61646c7b 7d726464 dpart} ${ldaddr}
bfc301a0: 687b2420 6c696664 65007d65 6f6f626d ${hdfile}.emboo
bfc301b0: 65733d74 766e6574 6f6f6220 67726174 t=setenv bootarg
bfc301c0: 6f722073 2f3d746f 2f766564 306d6172 s root=/dev/ram0
bfc301d0: 6f6f623b 62206d74 30346366 00303030 ;bootm bfc40000.
bfc301e0: 746f6f72 68746170 706f2f3d 666e2f74 rootpath=/opt/nf
bfc301f0: 6f6f7273 696d2f74 6c657370 73666e00 sroot/mipsel.nfs
bfc30200: 73677261 7465733d 20766e65 746f6f62 args=setenv boot
bfc30210: 73677261 6f6f7220 642f3d74 6e2f7665 args root=/dev/n
bfc30220: 72207366 666e2077 6f6f7273 7b243d74 fs rw nfsroot=${
bfc30230: 76726573 70697265 7b243a7d 746f6f72 serverip}:${root
bfc30240: 68746170 7069207d 697b243d 64646170 path} ip=${ipadd
bfc30250: 243a7d72 7265737b 69726576 243a7d70 r}:${serverip}:$
bfc30260: 7461677b 79617765 3a7d7069 656e7b24 {gatewayip}:${ne
bfc30270: 73616d74 243a7d6b 736f687b 6d616e74 tmask}:${hostnam
bfc30280: 3a3a7d65 0066666f 6673666e 3d656c69 e}::off.nfsfile=
bfc30290: 696c6d76 007a756e 6c73666e 3d64616f vmlinuz.nfsload=
bfc302a0: 2073666e 646c7b24 72646461 7b24207d nfs ${ldaddr} ${
bfc302b0: 76726573 70697265 7b243a7d 746f6f72 serverip}:${root
bfc302c0: 68746170 7b242f7d 6673666e 7d656c69 path}/${nfsfile}
bfc302d0: 6f6f6200 74657274 333d7972 6f620030 .bootretry=30.bo
bfc302e0: 6d63746f 723d3164 68206e75 6f6f6264 otcmd1=run hdboo
bfc302f0: 75723b74 6c66206e 746f6f62 6f6f6200 t;run flboot.boo
bfc30300: 646d6374 75723d32 6c66206e 746f6f62 tcmd2=run flboot
bfc30310: 6f6f6200 646d6374 75723d33 6d65206e .bootcmd3=run em
bfc30320: 746f6f62 6c627500 3d64616f 6f686365 boot.ubload=echo
bfc30330: 616f4c20 676e6964 757b2420 72617062 Loading ${ubpar
bfc30340: 243a7d74 6662757b 7d656c69 7478653b t}:${ubfile};ext
bfc30350: 616f6c32 64692064 7b242065 61706275 2load ide ${ubpa
bfc30360: 207d7472 646c7b24 72646461 7b24207d rt} ${ldaddr} ${
bfc30370: 69666275 007d656c 61736275 3d726464 ubfile}.ubsaddr=
bfc30380: 30636662 30303030 65627500 72646461 bfc00000.ubeaddr
bfc30390: 6366623d 66666632 62750066 73616c66 =bfc2ffff.ubflas
bfc303a0: 72703d68 6365746f 666f2074 7b242066 h=protect off ${
bfc303b0: 61736275 7d726464 757b2420 64616562 ubsaddr} ${ubead
bfc303c0: 3b7d7264 20617265 62757b24 64646173 dr};era ${ubsadd
bfc303d0: 24207d72 6562757b 72646461 70633b7d r} ${ubeaddr};cp
bfc303e0: 2420622e 61646c7b 7d726464 757b2420 .b ${ldaddr} ${u
bfc303f0: 64617362 207d7264 69667b24 6973656c bsaddr} ${filesi
bfc30400: 3b7d657a 2e706d63 7b242062 6461646c ze};cmp.b ${ldad
bfc30410: 207d7264 62757b24 64646173 24207d72 dr} ${ubsaddr} $
bfc30420: 6c69667b 7a697365 75007d65 61726770 {filesize}.upgra
bfc30430: 723d6564 75206e75 616f6c62 62752064 de=run ubload ub
bfc30440: 73616c66 74650068 74636168 3363723d flash.ethact=rc3
bfc30450: 34333432 6874655f 61706900 3d726464 2434_eth.ipaddr=
bfc30460: 2e323931 2e383631 35322e30 65730032
bfc30470: 72657672 313d7069 312e3239 302e3836 rverip=192.168.0
bfc30480: 0038352e 7069636e 3239313d 3836312e .58.ncip=192.168
bfc30490: 352e302e 64680038 746f6f62 6e75723d .0.58.hdboot=run
bfc304a0: 6c646820 2064616f 746f6f62 6200796d hdload bootmy.b
bfc304b0: 6d746f6f 6f623d79 206d746f 30303238 ootmy=bootm 8200
bfc304c0: 30303030 6f6f6200 3d646874 65746573 0000.boothd=sete
bfc304d0: 6220766e 61746f6f 20736772 746f6f72 nv bootargs root
bfc304e0: 65642f3d 64732f76 623b3161 6d746f6f =/dev/sda1;bootm
bfc304f0: 30323820 30303030 62750030 74726170 82000000.ubpart
bfc30500: 313a303d 66627500 3d656c69 72616873 =0:1.ubfile=shar
bfc30510: 2d752f65 746f6f62 622d752f 2d746f6f e/u-boot/u-boot-
bfc30520: 6d2d3276 2e737069 73616c66 69622e68 v2-mips.flash.bi
bfc30530: 6966006e 6973656c 333d657a 32373833 n.filesize=33872
bfc30540: 6c660044 746f6f62 7465733d 20766e65 D.flboot=setenv
bfc30550: 746f6f62 73677261 6f6f7220 642f3d74 bootargs root=/d
bfc30560: 682f7665 3b316164 746f6f62 6662206d ev/hda1;bootm bf
bfc30570: 30303463 74003030 746f6f62 7466743d c40000.tboot=tft
bfc30580: 6f6f6270 32382074 30303030 66203030 pboot 82000000 f
bfc30590: 616e6f6f 65733b73 766e6574 6f6f6220 oonas;setenv boo
bfc305a0: 67726174 656e2073 6e6f6374 656c6f73 targs netconsole
bfc305b0: 3636363d 39314036 36312e32 2e302e38 =6666@192.168.0.
bfc305c0: 2c2f3737 32393140 3836312e 352e302e 77/,@
bfc305d0: 72202f38 3d746f6f 7665642f 6d61722f 8/ root=/dev/ram
bfc305e0: 77722030 6f6f623b 38206d74 30303032 0 rw;bootm 82000
bfc305f0: 00303030 746f6f62 73677261 6f6f723d 000.bootargs=roo
bfc30600: 642f3d74 732f7665 20316164 6e207772 t=/dev/sda1 rw n
bfc30610: 6f637465 6c6f736e 36363d65 31403636 etconsole=6666@1
bfc30620: 312e3239 302e3836 3235322e 31402c2f,@1
bfc30630: 312e3239 302e3836 2f38352e 00000000

For the rest are all zeroes. The only meaningful part is the first 4 bytes, can Shihsung do some investigation on that?

PostPosted: Sun Dec 27, 2009 12:35 am 

Joined: Sun Aug 05, 2007 4:15 am
Posts: 36
Ah, I see the problem! To workaround just do "setenv silent 1; saveenv". BTW, the first 4-bytes is just the checksum of the environment settings.

PostPosted: Sat Jan 02, 2010 2:23 am 

Joined: Sun Aug 05, 2007 4:15 am
Posts: 36
I have fixed the problem and updated the U-Boot image http://sites.google.com/site/shihsung/l ... ects=0&d=1. There is also a new version based on u-boot-2009.11 http://sites.google.com/site/shihsung/r ... oc/hd-hlan. You can also find the new kernel image based on linux- there.

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

All times are UTC+01:00

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited