Buffalo NAS-Central Forums

Welcome to the Linkstation Wiki community
It is currently Mon Jun 25, 2018 6:53 pm

All times are UTC+01:00




Post new topic  Reply to topic  [ 54 posts ]  Go to page Previous 1 2 3 4 Next
Author Message
 Post subject: Re: 2.6.23 +
PostPosted: Tue Aug 19, 2008 11:20 pm 
Offline
Site Admin
User avatar

Joined: Mon Aug 28, 2006 1:15 am
Posts: 2606
Thanks Bauldrick :) ... I will keep on w/ it... I have those devices taken out, so now I can look at memory and some other basic stuff...

_________________
LS1 (foonas, nfs, Tranmission & p910nd print server, Firefly for my Roku)
LS-HG500 (Lenny)
Various LS-Pros v1,v2 (unbricked w/ serial & jtag)
KuroPro, LS2 & KuroHG (foonas)
Working on davysweather.dyndns.org lately...

=> wooohooo!
wooohooo!
Unknown command 'wooohooo!' - try 'help'


Top
   
 Post subject: Re: 2.6.23 +
PostPosted: Sun Sep 14, 2008 12:18 am 
Offline
Site Admin
User avatar

Joined: Mon Aug 28, 2006 1:15 am
Posts: 2606
Bauldrick, not a lot of progress since I posted last, but I am about to put the serial header on my LS2's board so I can see what is going on... maybe it is actually booting but networking isn't up... I will check this out and post back as soon as I see what (if anything) is going on...

_________________
LS1 (foonas, nfs, Tranmission & p910nd print server, Firefly for my Roku)
LS-HG500 (Lenny)
Various LS-Pros v1,v2 (unbricked w/ serial & jtag)
KuroPro, LS2 & KuroHG (foonas)
Working on davysweather.dyndns.org lately...

=> wooohooo!
wooohooo!
Unknown command 'wooohooo!' - try 'help'


Top
   
 Post subject: Re: 2.6.23 +
PostPosted: Tue Sep 16, 2008 12:02 am 
Offline
Betatester
User avatar

Joined: Thu Jul 14, 2005 4:38 pm
Posts: 941
Location: England
don't want to sound too American (because I'm not)... You the man... hooah :p

Nice one davy, if you need me to clarify something just let me know


Top
   
 Post subject: Re: 2.6.23 +
PostPosted: Tue Sep 16, 2008 12:34 am 
Offline
Site Admin
User avatar

Joined: Mon Aug 28, 2006 1:15 am
Posts: 2606
hehe, thanks Bauldrick.

I now have serial access to my LS2 (had to make an easy script in UBoot to switch to switch to ser and then bootm 8200000
Code:
setenv serboot 'run ser ; bootm 82000000 '

had to solder a bit or two, had to add a line like
Code:
T0:23:respawn:/sbin/getty -L ttyS0 57600
in foonas's inittab, so we can log in via serial...

I just forgot to order myself a resistor (30ohm ? I think - got to look at Kuroguy's and LNI's notes...) Then I'll have write access via the ser console as well. Once I get that resistor in I won't need the little script from above anymore...

I don't know if it is actually booting ... maybe just either hanging, or all connectivity is borked. I'll start turning all of the gpio stuff off, and other stuff as well until I get some output after boot.

_________________
LS1 (foonas, nfs, Tranmission & p910nd print server, Firefly for my Roku)
LS-HG500 (Lenny)
Various LS-Pros v1,v2 (unbricked w/ serial & jtag)
KuroPro, LS2 & KuroHG (foonas)
Working on davysweather.dyndns.org lately...

=> wooohooo!
wooohooo!
Unknown command 'wooohooo!' - try 'help'


Top
   
 Post subject: Re: 2.6.23 +
PostPosted: Tue Sep 23, 2008 4:11 am 
Offline
Site Admin
User avatar

Joined: Mon Aug 28, 2006 1:15 am
Posts: 2606
Alright Bauldrick, from my experiences, either the rb532 source in 2.6.27-rcN has a lot of work to be done on it, or there is something very small/big but essential that I am missing. After a month of work, I am still not gettting 2.6.27-rc3 to boot. Also, I was in error when I said that rb532 (similar board to ls2) will be supported in 2.6.27. It is not due in vanilla until 2.6.28, so there may be still large gaps in function... It is better for me to wait until the code is stable anyway.

So it is time to punt (yet hopefully still score some points) ... I do have 2.6.23.17 booting from back midAugust ... and I found this at OpenWrt: https://dev.openwrt.org/browser/trunk/target/linux/rb532?rev=11844 I am hoping that there may be enough here to patch the pci problem below. (see <<<=========)
After that, the OpenWRT source shows patches for 2.6.24 as well. Maybe along the way I will learn more/stumble upon the problem that is keeping 2.6.27 from booting.

Code:
davygravy@bitbaker-i686:~$ telnet 192.168.11.107
Trying 192.168.11.107...
Connected to 192.168.11.107.
Escape character is '^]'.

   ______ _____ _____ __   __  _____  ______
  |   ___|     |     |   \|  |/  _  \|   ___|
 _|   ___|  -  |  -  |       |   _   |\   \
| |__|   |_____|_____|__|\___|__| |__|_\   \
|___________________________________________|

foonas-em for lsmipsel - http://foonas.org

lsmipsel login: root
Password:
foonas-em$ uname -a
Linux lsmipsel 2.6.23.17 #1 Mon Aug 11 22:48:03 CDT 2008 mips unknown
foonas-em$ dmesg
<5>Linux version 2.6.23.17 (davygravy@bitbaker-i686) (gcc version 4.2.4) #1 Mon Aug 11 22:48:03 CDT 2008
<4>CPU revision is: 0001800a
<4>Determined physical RAM map:
<4> memory: 04000000 @ 00000000 (usable)
<6>Initrd not found or empty - disabling initrd
<7>On node 0 totalpages: 16384
<7>  Normal zone: 128 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 16256 pages, LIFO batch:3
<7>  Movable zone: 0 pages used for memmap
<4>Built 1 zonelists in Zone order.  Total pages: 16256
<5>Kernel command line: netconsole=6666@192.168.11.150/,@192.168.11.149/ root=/dev/ram0 rw
<6>netconsole: local port 6666
<6>netconsole: local IP 192.168.11.150
<6>netconsole: interface eth0
<6>netconsole: remote port 6666
<6>netconsole: remote IP 192.168.11.149
<6>netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
<4>Primary instruction cache 8kB, physically tagged, 4-way, linesize 16 bytes.
<4>Primary data cache 8kB, 4-way, linesize 16 bytes.
<6>Synthesized TLB refill handler (20 instructions).
<6>Synthesized TLB load handler fastpath (32 instructions).
<6>Synthesized TLB store handler fastpath (32 instructions).
<6>Synthesized TLB modify handler fastpath (31 instructions).
<4>Initializing IRQ's: 168 out of 168
<4>PID hash table entries: 256 (order: 8, 1024 bytes)
<4>Rx5C348: driver initialized
<4>calculating r4koff... 000c34b8(799928)
<4>CPU frequency 399.96 MHz
<4>Using 199.982 MHz high precision timer.
<4>start_kernel(): bug: interrupts were enabled early
<6>Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
<6>Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>Memory: 60512k/65536k available (1989k kernel code, 4960k reserved, 270k data, 1012k init, 0k highmem)
<7>Calibrating delay loop... 398.33 BogoMIPS (lpj=796672)
<4>Mount-cache hash table entries: 512
<6>NET: Registered protocol family 16
<4>PCI: Initializing PCI
<4>registering PCI controller with io_map_base unset
<6>Time: MIPS clocksource has been installed.
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>TCP established hash table entries: 2048 (order: 2, 16384 bytes)
<6>TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP: Hash tables configured (established 2048 bind 2048)
<6>TCP reno registered
<6>io scheduler noop registered
<6>io scheduler deadline registered (default)
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
<6>serial8250: ttyS0 at MMIO 0xb8058000 (irq = 104) is a 16550A
<4>RAMDISK driver initialized: 2 RAM disks of 8192K size 1024 blocksize
<6>loop: module loaded
<6>rc32434 Ethernet driver. (mar2904)
<6>eth0: Rx IRQ 40, Tx IRQ 41, 00:07:40:fb:e2:d0
<3>netconsole: eth0 doesn't support polling, aborting.
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>IT8212: IDE controller at PCI slot 0000:00:02.0
<6>IT8212: chipset revision 19
<6>it821x: controller in pass through mode.
<6>IT8212: 100% native mode on irq 255
<6>    ide0: BM-DMA at 0x18800000-0x18800007, BIOS settings: hda:pio, hdb:pio
<6>    ide1: BM-DMA at 0x18800008-0x1880000f, BIOS settings: hdc:pio, hdd:pio
<7>Probing IDE interface ide0...
<4>hda: SAMSUNG SP1203N, ATA DISK drive
<7>hda: selected mode 0x45
<4>ide0: Disabled unable to get IRQ 255.    <<<<<<=================== patch needed for this PCI is disable to get it to build...
<6>ide0: failed to initialize IDE interface
<7>Probing IDE interface ide1...
<5>LinkStation v2 flash device: 400000 at 1fc00000
<6>LinkStation v2 Flash: Found 1 x16 devices at 0x0 in 8-bit bank
<4> Amd/Fujitsu Extended Query Table at 0x0040
<5>number of CFI chips: 1
<5>cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
<5>Creating 4 MTD partitions on "LinkStation v2 Flash":
<5>0x00000000-0x00040000 : "mtd0: bootloader"
<5>0x00040000-0x00390000 : "mtd1: kernel+ramdisk"
<5>0x003c0000-0x00400000 : "mtd2: configuration"
<5>0x00000000-0x00400000 : "mtd3: all flash"
<5>LinkStation v2 flash device initialized
<6>TCP cubic registered
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 10
<6>IPv6 over IPv4 tunneling driver
<6>NET: Registered protocol family 17
<6>Freeing unused kernel memory: 1012k freed
<7>eth0: no IPv6 routers present
foonas-em$

_________________
LS1 (foonas, nfs, Tranmission & p910nd print server, Firefly for my Roku)
LS-HG500 (Lenny)
Various LS-Pros v1,v2 (unbricked w/ serial & jtag)
KuroPro, LS2 & KuroHG (foonas)
Working on davysweather.dyndns.org lately...

=> wooohooo!
wooohooo!
Unknown command 'wooohooo!' - try 'help'


Top
   
 Post subject: Re: 2.6.23 +
PostPosted: Thu Sep 25, 2008 4:18 am 
Offline
Site Admin
User avatar

Joined: Mon Aug 28, 2006 1:15 am
Posts: 2606
a smidgeon of progress...

Code:
davygravy@bitbaker-i686:~$ telnet 192.168.11.107
Trying 192.168.11.107...
Connected to 192.168.11.107.


foonas-em$ dmesg
<5>Linux version 2.6.23.17 (davygravy@bitbaker-i686) (gcc version 4.2.4) #1 Wed Sep 24 21:24:27 CDT 2008
<4>CPU revision is: 0001800a
...

<4>PCI: Initializing PCI
<4>registering PCI controller with io_map_base unset
<6>Time: MIPS clocksource has been installed.
...
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>IT8212: IDE controller at PCI slot 0000:00:02.0
<6>IT8212: chipset revision 19
<6>it821x: controller in pass through mode.
<6>IT8212: 100% native mode on irq 142
<6>    ide0: BM-DMA at 0x18800000-0x18800007, BIOS settings: hda:pio, hdb:pio
<6>    ide1: BM-DMA at 0x18800008-0x1880000f, BIOS settings: hdc:pio, hdd:pio
<7>Probing IDE interface ide0...
<4>hda: SAMSUNG SP1203N, ATA DISK drive
<7>hda: selected mode 0x45
<4>ide0 at 0x18800010-0x18800017,0x18800022 on irq 142
<7>Probing IDE interface ide1...
<6>hda: max request size: 512KiB
<4>hda: lost interrupt
<4>hda: lost interrupt
<4>hda: lost interrupt
<4>hda: lost interrupt
<6>hda: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
<4>hda: lost interrupt
<6>hda: cache flushes supported
<6> hda:<4>hda: dma_timer_expiry: dma status == 0x24
<4>hda: DMA interrupt recovery
<4>hda: lost interrupt
<4> hda1 hda2 hda3 hda4
<4>hda: lost interrupt
...
<4>hda: dma_timer_expiry: dma status == 0x24
<4>hda: DMA interrupt recovery
<4>hda: lost interrupt
<4>hda: lost interrupt
...
foonas-em$
foonas-em$


At least pci is partly working now. So there is some more work to be done on this yet ... but it is encouraging that it is closer. For instance...

Code:
foonas-em$ fdisk /dev/hda

The number of cylinders for this disk is set to 14596.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): p

Disk /dev/hda: 120.0 GB, 120060444672 bytes
255 heads, 63 sectors/track, 14596 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks  Id System
/dev/hda1               1         609     4891761  83 Linux
/dev/hda2             610         672      506047+ 83 Linux
/dev/hda3             673        6752    48837600  83 Linux
/dev/hda4            6753       14596    63006930  83 Linux

Command (m for help): q

_________________
LS1 (foonas, nfs, Tranmission & p910nd print server, Firefly for my Roku)
LS-HG500 (Lenny)
Various LS-Pros v1,v2 (unbricked w/ serial & jtag)
KuroPro, LS2 & KuroHG (foonas)
Working on davysweather.dyndns.org lately...

=> wooohooo!
wooohooo!
Unknown command 'wooohooo!' - try 'help'


Top
   
 Post subject: Re: 2.6.23 +
PostPosted: Fri Sep 26, 2008 2:24 am 
Offline
Site Admin
User avatar

Joined: Mon Aug 28, 2006 1:15 am
Posts: 2606
Woohoo! getting a bit closer Bauldrick...
I can now mount a hdd, list and and read/write...
Code:
foonas-em$ mount
rootfs on / type rootfs (rw)
none on /proc type proc (rw)
none on /sys type sysfs (rw)
none on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw)
/dev/hda3 on /mnt type ext2 (rw)
foonas-em$ ls /mnt/*
/mnt/lost+found:

/mnt/stuff:
linux-2.6.22-ls2-w2.tar.gz
test.txt

... still getting some intermittent dma timeouts... but that should be fixable.

_________________
LS1 (foonas, nfs, Tranmission & p910nd print server, Firefly for my Roku)
LS-HG500 (Lenny)
Various LS-Pros v1,v2 (unbricked w/ serial & jtag)
KuroPro, LS2 & KuroHG (foonas)
Working on davysweather.dyndns.org lately...

=> wooohooo!
wooohooo!
Unknown command 'wooohooo!' - try 'help'


Top
   
 Post subject: Re: 2.6.23 +
PostPosted: Fri Sep 26, 2008 6:14 am 
Offline
Site Admin
User avatar

Joined: Mon Aug 28, 2006 1:15 am
Posts: 2606
Baulders, all the pci and ide stuff seems to be fixed now. I'll have an image for you to try this weekend... It looks good and everything so far seems to work fine. I'm only feeling like I still need to check on this message marked <<<============ ????? . It may be nothing in terms of a problem. I still have to build it w/ all the bells and whistles - a full module and feature set.

EDIT : That message is a red herring/not a problem. It is present in LNI's original kernel as well.


Code:
dmesg
<5>Linux version 2.6.23.17 (davygravy@bitbaker-i686) (gcc version 4.2.4) #1 Thu Sep 25 23:49:50 CDT 2008
...
<4>PCI: Initializing PCI
<4>registering PCI controller with io_map_base unset                   <<<============ ?????
<6>Time: MIPS clocksource has been installed.
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>TCP established hash table entries: 2048 (order: 2, 16384 bytes)
<6>TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP: Hash tables configured (established 2048 bind 2048)
<6>TCP reno registered
<6>io scheduler noop registered
<6>io scheduler deadline registered (default)
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
<6>serial8250: ttyS0 at MMIO 0xb8058000 (irq = 104) is a 16550A
<4>RAMDISK driver initialized: 2 RAM disks of 8192K size 1024 blocksize
<6>loop: module loaded
<6>rc32434 Ethernet driver. (mar2904)
<6>eth0: Rx IRQ 40, Tx IRQ 41, 00:07:40:fb:e2:d0
<3>netconsole: eth0 doesn't support polling, aborting.
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>IT8212: IDE controller at PCI slot 0000:00:02.0
<6>IT8212: chipset revision 19
<6>it821x: controller in pass through mode.
<6>IT8212: 100% native mode on irq 146
<6>    ide0: BM-DMA at 0x18800000-0x18800007, BIOS settings: hda:pio, hdb:pio
<6>    ide1: BM-DMA at 0x18800008-0x1880000f, BIOS settings: hdc:pio, hdd:pio
<7>Probing IDE interface ide0...
<4>hda: SAMSUNG SP1203N, ATA DISK drive
<7>hda: selected mode 0x45
<4>ide0 at 0x18800010-0x18800017,0x18800022 on irq 146
<7>Probing IDE interface ide1...
<6>hda: max request size: 512KiB
<6>hda: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
<6>hda: cache flushes supported
<6> hda: hda1 hda2 hda3 hda4
...

_________________
LS1 (foonas, nfs, Tranmission & p910nd print server, Firefly for my Roku)
LS-HG500 (Lenny)
Various LS-Pros v1,v2 (unbricked w/ serial & jtag)
KuroPro, LS2 & KuroHG (foonas)
Working on davysweather.dyndns.org lately...

=> wooohooo!
wooohooo!
Unknown command 'wooohooo!' - try 'help'


Top
   
 Post subject: Re: 2.6.23 +
PostPosted: Wed Oct 08, 2008 11:32 am 
Offline
Betatester
User avatar

Joined: Thu Jul 14, 2005 4:38 pm
Posts: 941
Location: England
Won't be able to give it a go until I return home next week.

Look forward to it though :D


Top
   
 Post subject: Re: 2.6.23 +
PostPosted: Wed Oct 08, 2008 1:13 pm 
Offline
Site Admin
User avatar

Joined: Mon Aug 28, 2006 1:15 am
Posts: 2606
thanks, Bauldrick.

OT: I'm looking at samba on lsmipsel as well. Did it work for you? Anything that was not functioning as it should? ? viewtopic.php?f=35&t=12171 ?

Thanks for your help, Bauldrick. :)

EDIT: bauldrick here's a torrent for the foonas-em image...

http://linuxtracker.org/index.php?page=torrent-details&id=7c9cc0e198d393b4d0b7b70c4402002908a3c7b3

_________________
LS1 (foonas, nfs, Tranmission & p910nd print server, Firefly for my Roku)
LS-HG500 (Lenny)
Various LS-Pros v1,v2 (unbricked w/ serial & jtag)
KuroPro, LS2 & KuroHG (foonas)
Working on davysweather.dyndns.org lately...

=> wooohooo!
wooohooo!
Unknown command 'wooohooo!' - try 'help'


Top
   
 Post subject: Re: 2.6.23 +
PostPosted: Wed Oct 15, 2008 10:39 pm 
Offline
Betatester
User avatar

Joined: Thu Jul 14, 2005 4:38 pm
Posts: 941
Location: England
Just quickly loaded it and mounted SD card

foonas-em$ mount
rootfs on / type rootfs (rw)
none on /proc type proc (rw)
none on /sys type sysfs (rw)
none on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw)
/dev/sda1 on /media/poo type vfat (rw,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)



http://pastebin.com/m10174f48


not tried anything as football is on!! nice one :up:


Top
   
 Post subject: Re: 2.6.23 +
PostPosted: Wed Oct 15, 2008 10:50 pm 
Offline
Site Admin
User avatar

Joined: Mon Aug 28, 2006 1:15 am
Posts: 2606
cool that's two positives...

Bauldrick, do you still have a copy of any earlier release of foonas for lsmipsel? I have only the 2.6.23.17 version I rolled about 2 weeks ago...

I want to compare samba/nfs performance between the two kernels.

It would be very helpful if you had this old image and could share it w/ me... ?

EDIT: Ehh, the football game -who is playing? :)

_________________
LS1 (foonas, nfs, Tranmission & p910nd print server, Firefly for my Roku)
LS-HG500 (Lenny)
Various LS-Pros v1,v2 (unbricked w/ serial & jtag)
KuroPro, LS2 & KuroHG (foonas)
Working on davysweather.dyndns.org lately...

=> wooohooo!
wooohooo!
Unknown command 'wooohooo!' - try 'help'


Top
   
 Post subject: Re: 2.6.23 +
PostPosted: Wed Oct 15, 2008 11:07 pm 
Offline
Betatester
User avatar

Joined: Thu Jul 14, 2005 4:38 pm
Posts: 941
Location: England
England highlights...

root@LINKSTATION:/boot# ls
vmlinuz-2.6.27-rc3-debugv4
vmlinux-2.6.22.12 vmlinuz-bauldrick.gz
vmlinux-2.6.22.19 vmlinuz-bauldrick2.6.23.gz
vmlinuz vmlinuz-svn-r8
vmlinuz-2.6.23-r3-lsmipsel-initramfs.bin vmlinuz.gz
vmlinuz-2.6.27-rc2_v3 vmlinuz2.6.27-rc2.gz
vmlinuz-2.6.27-rc3-debug3 vmlinuz92608foonasem.gz
vmlinuz-2.6.27-rc3-debug_LNI-addmemregion


thats what i have, which one you want?


Top
   
 Post subject: Re: 2.6.23 +
PostPosted: Wed Oct 15, 2008 11:38 pm 
Offline
Site Admin
User avatar

Joined: Mon Aug 28, 2006 1:15 am
Posts: 2606
well, I'm looking for an old copy of the foonas (full foonas, not the foonas-em image). I'm struggling a bit w/ samba and thought maybe it was working well for you back in spring or so of this year. I'm also wondering if my rates for transfer are as good as I can get them to be...

this would be a foonas image that perhaps was put up for testing in March, April or so... I didn't have a mipsel back then so I had no reason to download one... :?

EDIT: If you could just post your samba and nfs rates that would be helpful as well. Read and write... I'm just trying to make sure this kernel is as fast as the 2.6.22.x one is.

_________________
LS1 (foonas, nfs, Tranmission & p910nd print server, Firefly for my Roku)
LS-HG500 (Lenny)
Various LS-Pros v1,v2 (unbricked w/ serial & jtag)
KuroPro, LS2 & KuroHG (foonas)
Working on davysweather.dyndns.org lately...

=> wooohooo!
wooohooo!
Unknown command 'wooohooo!' - try 'help'


Top
   
 Post subject: Re: 2.6.23 +
PostPosted: Wed Oct 29, 2008 12:33 pm 
Offline
Betatester
User avatar

Joined: Thu Jul 14, 2005 4:38 pm
Posts: 941
Location: England
completely misread what you posted, sorry - don't have one davy...

Don't use nfs, and never really tested the speed. Always been slow though.. about 60mins to write a 700MB film to it.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 54 posts ]  Go to page Previous 1 2 3 4 Next

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Powered by phpBB® Forum Software © phpBB Limited