Buffalo NAS-Central Forums
http://forum.buffalo.nas-central.org/

kernel reboots iteslf
http://forum.buffalo.nas-central.org/viewtopic.php?f=11&t=9091
Page 1 of 1

Author:  sdnalloh [ Sat Jun 21, 2008 6:50 am ]
Post subject:  kernel reboots iteslf

Hi-

I recently compiled kernel 2.6.25 and, for some reason it won't boot. the nc output looks normal until i get to "Restarting system." :-(

where and how should i begin my search for the problem behind this?

-Greg

Author:  andre [ Sat Jun 21, 2008 8:14 am ]
Post subject:  Re: kernel reboots iteslf

Well, there's quite a lot of information in the forum. The short version, there's Sylver's SVN repository or my precompiled kernels, see the information on my website.

Author:  sdnalloh [ Sun Jun 22, 2008 6:29 am ]
Post subject:  Re: kernel reboots iteslf

That's not really my question.
My current kernel is one i compiled myself. 2.6.22 it's been working great for awhile now. The only reason i want to upgrade is so i can get a wireless usb dongle to work with my kuro. i expected this to be a clean upgrade.

$ zcat /proc/config.gz > /usr/src/linux/.config
$ make oldconfig
$ make uImage
$ make modules
# make modules_install

unfortunately, somethings wrong. I looked through my logs. Nothing stands out to me.

I'm wondering, what steps should i take to debug this problem?

Author:  andre [ Sun Jun 22, 2008 8:22 am ]
Post subject:  Re: kernel reboots iteslf

The vanilla kernel sources won't work, as they can't deal with Buffalo's ext3 byte swap. Use Sylver's SVN repository, or the "melfs" patch and genbako's kurobox patch; plus genbako's, Sylver's or my .config as the basis. Also make sure you have avr_evtd installed and configured. (You can find more information on all this in the forum and wiki.)

I would (shamelessly) recommend to install my kernel first (see http://hvkls.dyndns.org/downloads/docum ... aller.html), not so much because it comes with over 900 modules to time and I could add yours if missing, but because this would also set up avr_evtd and modue-init-tools for you and adjust a few daemon settings. It would give you a working kernel 2.6 and a head-start for your own experiments.

Author:  sdnalloh [ Mon Jun 23, 2008 7:38 pm ]
Post subject:  Re: kernel reboots iteslf

I'm currently running linux 2.6.22-gentoo-r5 which i compiled myself following the instructions found here: http://www.kurobox.com/mwiki/index.php/ ... .6_kernels

Why would the same not work for 2.6.25? What has changed?

Author:  andre [ Tue Jun 24, 2008 5:18 am ]
Post subject:  Re: kernel reboots iteslf

git/*.dtb

Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/